SPECIAL REPAIR TO BLDG NO P-50 OF CERTAIN MIL UNIT UNDER GE (S) BINNAGURI

Amount

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified

All as item No 1 here-in before but n.exc 1.5 Sqm each complete all as specified

Taking down shutters and refixing in same openingof any description exc 1 Sqm but not exc 2 Sqm each complete all as specified

Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc complete all as specified

Demolition of brick walling built in cement mortar etc complete all as specified.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and removal off the site.

Taking town of steel windows/ventilators of any size and description complete all as specified and removal from site

Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins complete all as specified

Demolition of reinforced cement concrete in any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified

M&L for glazed coloured ceramic tiles (450x350x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified

M&L for providing machine cut polished Kota stone slab 18-20mm thick over cement screed bed and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thick screed bed complete all as specified.

All as per item No 15 but in narrow width of vertical surfaces complete all as specified

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in two panel etc complete all as specified

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, Copping, slightly rounded or chamfered angles & throating including necessary form work as required complete all as specified

M & L PCC (1:2:4) type B1 (20mm graded aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified . (Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule 'A')

M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in water tank platforms,filling and mass concrete complete all as specified

Material and labour for precast reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (20mm graded stone aggregate) as in chajjas etc and set in CM (1:4) including necessary formwork complete all as specified. Note:- Reinforcement shall be measured and paid for separately.

Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs complete all as specified

Material and labour for hoisting and fixing rotational moulded polyethylene(double layer) water storage tanks 500lit capacity (Cylinderical vertical), ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet, over flow connection, ball valves etc complete all as specified.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. (Make : PRAYAG) complete all as specified

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm, thickness 1 mm complete all as specified

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm, thickness 1 mm complete all as specified

M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified

S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed all as specified

S&F of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existiog opening and making to match as per existing surfaces complete all as specified

S&F in repair of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces complete all as specified

S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified

S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified

S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified

S&Fof 3mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair complete all as specified

Material and labour rendering 20mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces in two layer 10mm each layer and top layer mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound complete all as specified Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Supply only liquid water proofing compound all as specified

M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified

M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying wall putty 1.00 mm thick (average thickness) to wall surface complete all as specified .

M&L applying two coats of weather proof exterior acrylic emulsion paint of standard quality and make ,over a coat of white primer including preparation of new wall surfaces complete all as specified. Make of Weather proof exterior acrylic emulsion and primer : Asian Apex Ultima/Berger weather coat long life 10 NOTE :- (i) Surface where Wall care putty to be provided shall be cleaned by vacuum suction system to remove all the dust. (ii) Wall care putty shall be mixed in multipurpose mixer machine. Putty shall be applied with Putty Sprayer.(iii) Weather coat shall be applied with Auto Roller, which consists of pump attached to the roller head and ensures a uniform feed of paint to the roller and also ensure any spillage on the floor and windows as in the case of a conventional painting methodology. Roller in coats comprises of vertical strokes upward and downward which together constitute one coat. A uniformly finished surface without patches, roller marks etc shall be obtained.(iv) The work shall be carried out through authorized applicator of the manufacturer. Contractor shall submit details of applicator for approval of GE prior to execution complete all as specified

Add M & L for complete removal of existing treatment and finishing the wall with two coats of Acrylic smooth exterior emulsion paint of required shed over old treated surface over and incl priming coat of exterior primer over a coat of wall care putty all as specified. Note: (i) surface where wall care putty to be provided shall be cleaned by vacuum suction system to remove all the dust (ii) Wall care putty shall be mixed in multi purpose mixer machine. Putty shall be applied with putty sprayer. (iii) Paint shall applied with auto roller, which consists of pump attached of the roller and ensure a uniform feed of paint to the roller and also ensure any spillage on the floor and windows as in the case of conventional painting methodology roller in coats comprises of vertical storkes upward and downward which together constitute on coat. A uniformly finished surface without patch, m rooler marks etc shall be obtained. (iv) The work shall be carried out through authorized applicator of the manufacurer. Contractor shall submit details of applicator for approval of GE prior to execution

M & L for two coats of synthetic enamel painting to new wooden surface over a coat of pink primer including preparation of surface area exe 10 cm width & grith complete all as specified

Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth complete all as specified

Material and labour for applying one coat of synthetic enamel paint on old painted steel and iron surfaces of any description over 10 cm in width or girth including necessary preparation of surfaces complete all as specified

Complete removal of existing treatment from old plastered or unplastered surfaces of walls including clearing with scrapers and applying two coats acrylic distemper over a coat or primer over wall care putty complete all as specified

Material and labour for preparation of old plastered ceiling surfaces by brooming down or steel wire brushing: scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified

M&L for applying three coat of white washing including preparation of new or previously untreated surface of ceiling complete all as specified

Use & waste of Form work to chullah hood, chajjas, troughs and similar items including edges etc for rough finished flat concrete surface complete all as specified

M&L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified

M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip complete all as specified

M&L for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties etc including one coat of red oxide paint complete all as specified

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 500m and n. exc. 900m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified

M&L for water proofing treatment to RCC roof slab as specified below :- (a) 10mm th cement plaster in CM 1:3 with integral WPC to be laid over the RCC roof slab when the concrete is green. (b) Applying a unifirom coat of bitumen primer @ 0.70 kg/sqm over cement plaster. (c) 3mm thick plain texture and weighing not less than 3.6 kg/sqm atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reainforced with non woven polyster matt black finished over compatible primer at 0.4 Ltr / Sqm of density at 25 degree centigrade 0.87 - 0.89 kg/ltr and viscosity 70-160 cps or cold sticker and torch application of membrane with overlap while torchin g shall be 150mm on length side and 10 mm on width side. after necessary preparation of surface complete as per manufacturers instruction. M/s fosroc chemicals "Proofex Torchseal 3PI/4PI/Antiroof Plain" or M/s STP Limited "Super Themolary APP PL/MT/Superior Shaliplus/industrual bitumen, ShaliTex Primer" or M/s Sika India Pvt Ltd "Sika WP Shield 103P/PM/ Sika WP Shield 104P/PM) or equivalent as approved by GE. (d) Apply two coats of bitumastic - Aluminium paint over the membrane.

M&L 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in floors as levelling course for roof treatment complete all as specified

S&F of in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doors complete all as specified

Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified for Bore of tubing 15mm complete all as specified

As per Item No 50 above but for Bore tubing 20mm complete all as specified

M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for Bore of tubing 15mm complete all as specified

As per Item No 52 above but for Bore tubing 20mm complete all as specified

Refixing of reusable GI pipes of 15mm bore after necessary cleaning and renewal of GI fittings as required all as specified. Note: (i) GI tubing retrieved against relevant item shall be reused. (ii) New GI fittings required shall be supplied by the contractor and the quoted rate shall be deemed to be inclusive of the cost of the same.

Refixing of reusable GI pipes of 20mm bore after necessary cleaning and renewal of GI fittings as required all as specified. Note: (i) GI tubing retrieved against relevant item shall be reused. (ii) New GI fittings required shall be supplied by the contractor and the quoted rate shall be deemed to be inclusive of the cost of the same.

S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC (Make : Sleek of Hindware, Slimline of Parryware or equivalent of Cera) complete all as specified

S&F Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified.

S&F in repair wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length complete all as specified

S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified

S&F in repairs bib taps 15mm bore long body fancy type chromium plated with screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair complete all as specified

S&F in repairs angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified

M&L for PVC (SWR) pipes 'type A single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified

S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as specified (Bore of pipe 110mm)

S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door complete all as specified

S&F 110mm dia PVC SWR vent cowl complete all as specified

M&L in repairs for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 75 mm) as in repair complete all as specified

M&L for 150 mm size aluminium anodised cast type handles complete all as specified

Taking down rolling shutter of any description exc 2 sqm but n exc 5 sqm each and removing to store from site complete all as specified

S & F of Steel rolling shutters 1.20 mm thick sheet Safety lever locks mild steel with 4 levers for rolling shutters , with out ball bearing with gear operated type with chain wheel and hand chain as specified including top cove with an?choring rod, hasp and staple and one shop coat of primer; erected in position as indi?cated, complete: complete all as specified

S&F of 200mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified

S& F Vitreous China bowl urinal flat back, sizeof 330 x 250 x 445 mm white (minimum),with grating and union for discharge pipe(excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinals gainst wall in cement mortar1:2, securing urinal to plugs withand including 60mmlong brassscrews, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union fordischarge pipe complete all as specified Make: Prayag model 4999 or equivalent as in the list of makes

S&F in repair Vitreous china wash down water closet pan (pedesatal pattern) (EWC) white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete fixed in repairs complete all as specified

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as specified

Supply and fix in repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe complete all as specified

S& F of 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified

M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters; verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified

S&F 100mm size mild steel butt hinges medium weight complete all as specified

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified

S&F factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/ chowkhat of size 45x85 mm coprising of virgin PVC polymer of K value 58-60 (Suspension Grade) , calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) Minimum compressive strength of 58 N/mm2 , modules of eleasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasterners of required dia and lenght (M.S. hold fast/lugs or SS dash fasteners shall be paid for separaterly) complete all as Specified.. Note : For WPC solid door/ window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus sides shall be acceptable but no extra payment on this account shall be made.

S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Partical board core complete all as Specified.

M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement screed bed (1:4) including rounded the exposed surfaces of granite complete all as specified.

Supply and fixed in repairs sinks without drainage board made of stainless steel (SS 304 grade) 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 510mm x 430mm 203mm bowl size 430mm x 380mm x 203mm all complete as specified Make: Prayag model 1318D or equivalent as in the list of makes.

S&F Harrison rails /curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc. fixed in repair complete all as specified

S&F extruded aluminium section in door/ windows/ ventilators ( Powder coated in any colour ) with sliding , openable or fixed type shutter or any pattern as directed,(aluminium section medium weight of series -B or size as directed by EIC) jointed together including rubber beading and all necessary fittings ,complete all as specified . (Note:-(i) Only aluminium section measured and paid under this item. (ii) Rate quorted by the contractor shall deemed to inclusive for nessary fittings and fixture such has roller, handle locks etc.(iii) Glass, XPM wire mesh and bakelite sheet shall be measured and paid separately (at supply rates only).

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified

M&L for 5 mm thick figured glass and glazing exceeding 0.50 Sqm in each pane fixed with including rubber gasket in aluminium frame work complete all as specified

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified

M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws (or provision of modular sunken box, modular back plate and top cover for housing of modular switch,socket, regulators etc as per site requirement) for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost , One light point controlled by one way switch 5/6 amps complete all as specified.

ALL as per item no. 105 but One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps complete all as specified.

ALL as per item no. 105 but One socket out let 5/6 amps point on the same board complete all as specified.

ALL as per item no. 105 but One socket out let 5/6 amps point on the independent board complete all as specified.

All as per item No 105 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified

S&F switch piano flush type 5/6 amps single pole one way complete all as specified

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified

S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified

S&F switch piano flush type 15/16 amps single pole one way complete all as specified

S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified

S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified

S&F, IP 20, class I, LED tube light fittings 18 W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of min 4 KV more and lumen output min 120 lumen per watt, TDH<10% or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S & F LED street light fittings not less than 35 Watt capacity having SPD not less than 5 KV, lumen output> 120 lumen per Watt, 230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified

Taking down LED high bay light and refixing the same after B&R work with MS Hooks fitted to existing structure complete all as spedified

S&F Sheet metal enclosure forvertical type TPN DB 6 way(or nearest next higher), double door incl hinged shutter and locking arrangemant for fixing for fixing DBs, flushed/ semi flushed/grouting on wall as per site requirement including DIN rail channel to mount MCBs with TPN bus bar channel of rating 200 Amps and neytral link duly mounted on F class insulator with with colour coded heat shrinkable sleeves and powder coated paint after preparation of surfaces panel , including MCCB TP 200 Amps with blanking plates including provision of blanking plates as required and taking down the old one complete all as specified

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including provision of blanking plates as required and taking down the old one complete all as specified

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with din rail (as per OEM), 415Volt IP-20 protection suitable for fixing MCB"S/lsolators with and including taking down old one complete all as specified

S&F MCB, Tripple pole & neutral 40 to 100 amps, 415 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified

S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:1.5:3 typeA1(niminal mix) using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified

M&L for street light bracket made out of GI pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified

M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incomming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for housing 01 No TPN DB, MCCBs and fixing of existing bus bars on DMC insulators etc complete all as specified

Material and labour for concealed sub-main wiring alongwith earth wire of size of 4 x 10.0 sq. mm + 2 x 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified NOTE : Four runs of 10 sqmm conductor for main and two run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified NOTE : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

Taking down ceiling fan/ exhaust fan sealing cable end, dismantling blades and removing fan blades to store complete all as specified

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified

SS SHARMA (BID ID -3318026)

M/S SARKAR BROTHERS (BID ID -3318598)

Biswanath Sharma (BID ID -3319579)

M/S MOHAN KUMAR BANSAL (BID ID -3319150)

M/S East India Traders (BID ID -3319290)

M K Engineering WOrks (BID ID -3319940)

SHRI MANOIRANJAN BISWAS (BID ID -3319727)