Civil Work

Amount

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

25 mm dia (heavy type)

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm of Hyper or equivalent brand ), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete.

Providing and fixing on wall face / for external work unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.

Single tee with door

Single tee without door

110 mm bend

Shoe (Plain)

110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

12 mm cement plaster of mix :

1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix :

1:6 (1 cement: 6 coarse sand)

20 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Distempering with 1st quality acrylic distemper( Asian tractor or equivalent), having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including pplying additional coats wherever required, to achieve even shade and colour.

Old work (One or more coats)

Wall painting with premium acrylic emulsion paint ( Asian Apcolite or equivalent ) of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and anufacture, including applying additional coats wherever required to achieve even shade and colour.

One coat

Two coats

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint (Asian / Burger high gloss or equivalent) of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work

French spirit polishing :

One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead :

With cement mortar 1:4 (1cement: 4 coarse sand).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of thickness 3.70 mm.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing stone rubble masonry / Stone or RCC platform / floor tiles of any thickness manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :

In cement mortar

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead

75 to 80 mm dia pipe

100 mm dia pipe

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions/ PVC partition with M.S.iron framing , doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Dismantling aluminium/ Gypsum partitions/ PVC partition with M.S.iron framing , doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia. Pipes.

25 mm nominal outer dia. Pipes.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and fixing G.I. / Cpvc Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

15 mm nominal bore.

20 mm nominal bore.

25 mm nominal bore.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :

15mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour.

15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT grating of approved quality and colour.

Circular type.

100 mm nominal dia.

Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides

For pipes 100 to 250 mm diameter

Providing Plumber for plumbing, sanitary installations, water supply fittings and related works complete in a working day i/c cost of all T&P. (The material required for attending the complaints shall be arranged by the contractor at site and will be paid in separate items except cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid.) All dismantled unserviceable as well as serviceable materials stacks at site in proper way within 50 Metre leads as per direction of engineer in charge.

Providing carpenter required for carpentry works such as repair of doors , windows , cupboard shutters, false ceiling, dismantling of wooden partitions,desk board, tables, iron with pvc sheet partitions etc. as per site requirement i/c cost of screws ,nails, fevicol clamps etc. (The material required for attending the complaints shall be arranged by the contractor at site and will be paid in separate items except cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid.) All dismantled unserviceable as well as serviceable materials stacks at site in proper way within 100 Metre leads as per direction of engineer in charge.

Providing services of Beldar /Helper for need basis for carpenter / plumber and shifting of wooden tables from first floor to Ground floor near by another building as and when required etc. all complete as per direction of engineer-in-charge including the cost of ledder, tagari, phawra etc.for all jobs in one working day and dumping/ stacking all unused/ unserviceable materials within 150 M lead in the Campus as per direction of Engeer-In-Charge.

Constructing stone masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) ,foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and upto 1.00m including stone patti slab minimum 50 mm thick with opening of size 45cm x 60 cm , top finished with 40 mm thick C.C. 1:2:4 ( 1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) & smooth finishing with 6 mm thick cement plaster 1:3 ( Cement : 3 fine sand ) at top & sides complete.

Cleaning and washing complete toilet portion including glazed tiles on walls.floors, sanitary pots such as W.C. with cistern, wash basin , urinals pots, wash basin granite counter, nahni traps etc. with Harpic, surf and brush at FF portion in T.E.building MKHr i/c disposal of all rubbish out side the Muncipal area etc. all complete as per direction of engineer in charge.

Repairing to non-operational steel glazed windows upto three storey height including removal of existing glass panes safely if required, welding of section & box hinhes if required at site and refixing the same glass at same place after repairing of windows etc.all complete.The all works will be carried out as per actual site requirement & as per the instructions of Engineer-in-Charge. (Note:- The fixing of glass panes after cleaning with silicon and putty shall be paid in separate items. If the hinges are replaced with box hinges, the same will be paid in separate item.)( Note:-If glass breaks while removing glass from steel window then its cost will be recovered from the agency.)

Cleaning and washing with water & surf of whole T.E.Building (FF Portion) floors, walls, terrace, mumty terrace, steel windows, doors, PVC doors and partitions, projected chhajas, aroung T.E.Building and disposal of all garbage, building rubbish, unservieable waste papers sprading on floors, existing building rubbish including disposal of all rubbish materials upto 50 meter etc. all complete as per direction of engineer-in-charge.

Cleaning of open space upto 25 feet from old TRA TE building including cutting of unwanted tree branches spreading on the building, small and big plants, pruning of trees and uprooting of plants, pump room roof etc. and disposal of all garbage material including all tree branches, leaves, garbage, building waste, useless waste papers spread on garage, garbage of existing building and disposal of cut trees and plants etc. outside municipal area of ​​Jodhpur. All works shall be completed as per the direction of Engineer-in-Charge

Providing services of sewerman as and when required on need basis for cleaning of manholes and sewer line of T.E.Building upto septic tank and disposal of mulba outside the municipal area of Jodhpur etc. all complete as per direction of engineer in charge. (The material required for attending the complaints shall be arranged by the contractor at site and will be paid in separate items except cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid.)

Supplying of MS box type hinges with stainless steel screws etc. complete :

Providing and fixing C.P. brass pillar cock for basin basin of approved quality & manufacturer as per direction of Engineer- In -Charge:

15mm nominal bore (Weight should not be less than 650 gram)

Providing and fixing C.P. brass twin bib for jet points of European type W.C. pan of approved quality as per direction of engineer-in-charge.(Weight should not be less than 650 gram)

15mm nominal bore

Providing and fixing on plasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.

Nahni (floor) trap

Providing, laying and jointing unplasticised Rigid PVC pipes (approximate thickness 2.5mm) , including jointing with seal ring , leaving 10 mm gap for thermal expansion including excavation of earth and refilling of earth after work completion of work etc. all complete as per site requirement and direction of engineer in charge. (i)Single socketed pipes.

Supplying of MS handle (Window fastner) of size 125mm as per existing fixed pattern and design with not & bolt etc. complete as per direction of engineer-in-charge.

Providing and Fixing Kota stone manhole cover of size 0.60M x0.75 M of minimum 25 to 35 mm thick etc. all complete as per direction of engineer in charge.

Providing and Fixing sand stone Lintel for door / window with cement mortar 1:3 (1 cement : 3 fine sand ) etc. all complete as per direction of engineer in charge.

Red sand stone

120 to 150 mm thick

CREDIT of materials / items obtained from dismanteling being unserviceable.

Brass bib cock / stop cock./ball cock

15 mm nominal size.

Brass spindle of Pillar cock-15 mm nominal bore.

G.I. pipe.

C.P. Brass Pillar / mixer tap 15 mm.

P.V.C. flushing Cistern up to 10.00 Litre capacity.

Unservicable/Broken SCI/CI Rain water,Sanitary pipes and fittings of 75 to 100mm diameter

Unserviceable and dismantled MS section such as tees, angle,flat,steel bar, pressed steel chowkhat etc.

M/S BHARATPUR BUILDERS (BID ID -831902)

AJEET ENTERPRISES (BID ID -831767)