REPAIR PAINTING OF ELECTRIC FAN RODS AND ITS ATTACHMENT AT INA EZHIMALA

Amount

Notes for all items of BOQ:- a) Quoted rates is deemed to be inclusive of necessary scaffolding / ladder for maintenance of ceiling fan at any height. b) Register should be maintained for rectification of job duly signed by user.

M&L for taking down ceiling fan of any sweep and make by disconnecting electric connection, dismantling blades, down rod and removing ceiling fan for checking and refixing the same after completion of work complete all as specified and as directed.

Cleaning thoroughly ceiling fans 48"/56" (1200mm / 1400mm) sweep with kerosene oil and painting with one coat of synthetic enamel paint including preparation of surfaces, complete all as specified & directed by Engineer-in-Charge.

Taking down carefully aluminum/copper point wiring (fan) complete with fittings such as switches, ceiling rose, holder, regulators and making good disturbed surfaces of walls, floor to match with existing complete all as specified and as directed.

M&L for point wiring of one light point/fan point controlled by one switch with 1.5 sqmm Unilay- FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm Unilay - FRLS nsulated unsheathed copper conductor single core cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit 2mm thickness with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and as directed.

M&L for switch piano flush button single pole one way 5 amps 240 volts complete all as specified and directed by Engineer-in-Charge.

S&F in repair modular switch one way 6 Amps 1 module complete all as specified and directed by Engineer in charge.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed by Engineer-in-Charge.

S&F in repair fan step regulator, 120W - 2 module AC 230 Volts complete all as specified and as directed.

S&F fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed by Engineer-in-charge.

Dismantling the old U/S ceiling fan and taking out old burnt out winding including re winding of ceiling fan motor 1200mm /1400 mm sweep any make/size with super enamelled copper winding wire any gauge from 0.315 mm to 0.193mm. Sleeve work varnishing with `B' class insulation varnish, connection with flexible wire of appropriate size two core copper wire upto connector block, qty of copper winding wire not less than 350 grms and not more than 500 grms per fan motor complete all as specified and as directed.

M&L for capacitor AC 415 volts 2.5 mfd 50 Hz complete all as specified and directed by Engineer-in-Charge.

M&L for ceiling fan shaft of standard size including taking out old shaft, complete all as specified and as directed.

M&L for replacement of ball bearing any No suitable for ceiling fan upto 1400mm sweep complete all as specified and as directed.

Supply and fixing fan blade set up to 1400mm sweep complete (as per sample) and all as directed by Engineer-in-Charge.

M&L for replacement of PVC insulated flexible copper conductor cable 3 core of size 0.75 sqmm cut to length as required for connection from connector block of ceiling fan to ceiling rose/connector block of wiring complete all as specified and directed by Engineer-in-Charge.

Suply and fixing lower and upper canopy of ceiling fans of suitable size required at site as directed by Engr-in-Charge.

M&L for replacement of gun metal bush of suitable size for ceiling fan of any make, any size and sweep complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of rubber reel with nuts & bolts of ceiling fan with rubber reel of heavy duty for hanging fan complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of connector block of ceiling fan of suitable size of approved quality complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of down rod 90 cm long for ceiling fan 1200/1400mm sweep including clamps etc complete all as specified and as directed by Engineer-in-Charge.

M&L for replacement of down rod 60 cm long for ceiling fan 1200/1400mm sweep including clamps, etc complete all as specified and as directed by Engineer-in-Charge.

M&L for GI pipe 15mm dia medium grade which can be used as ceiling fan down rod including making holes for fixing of ceiling fan at top and bottom of the rod and length of the rod should be matched with existing rod length or as per site requirement complete all as specified and directed by Engineer-in-Charge.

ROTECH ENGINEERS AND BUILDERS (BID ID -3133099)

Neptune Engineers and Builders (BID ID -3132913)

SREEKRUPA ENTERPRISES (BID ID -3123611)

KDR CONSTRUCTION (BID ID -3123330)

pk janardhanan (BID ID -3121076)