CA NO. CWE /HILLS /PGH/66 OF 2021-2022 SPECIAL REPAIR TO ROAD FROM MAIN ROAD TO STATION KSP AND CAUSEWAY NEAR BLDG NO P-146 POCKET-3 OR MD ACCN AT MIL STN DHARCHULA UNDER GE PITHORAGARH

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

Removing building materials etc. to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for hardcore of broken stone or boulders of guage n. exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40 mm stone aggrigate) as in path/ hardstanding complete all as specified and directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed.

M&L for forming 12 mm thick expansion joints in 100 mm thick concrete slab, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/ dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on block masonry surfaces or other than fair faces of brick work or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channels complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removal of surplus soil to distance exc 250m but n exc 500 m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for RCC (design mix) M-25 ( 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc. 200 mm thick to rough finished (horizontal or sloping ) complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

SHAHJEE FRIDGE SERVICE