WBUDMA/SE/SLRDC/NIQ-03(e)/2024 25 of Executive Engineer/Salt Lake Reclamation Division

Amount

Single Metal Bed (Black):- Supplying and placing of single bed Dimensions W x H x D (cm)- 100 x 95.6 x 206 Seating Height (cm)- 43 Finish colour- Black Primary Material-Metal

Polyester Fabric Mattress:- Supplying and placing of mattress: Polyester Fabric - 85 GSM 18D PU foam in Quilting- 24 mm EPE, 19 D- 70 mm Coir, 80 D, 20% DRC

Three Seater Sofa (Thin Burgundy):- Supplying and placing of 3 seater Sofa:3 seater - Overall Size :Width :171cm Depth : 82cm Height :85cm Seating Height : 44cm Upholstery •Material : PVC •Shade : Burgundy• Thickness : 1 mm •Weight (GSM) : 575 Frame : •Material : Pine Wood •Moisture content : 10-12 % Foam : •Material : Slab stock • Density : Seat 32 kg/m3 and 28 kg/m3 with recron filler Back 28 kg/m3 Webbing : •Material : Nylon •Thickness : 2 mm Legs : •Material : PVC with 70 mm bush

Coffee Table:- Supplying and placing of coffee table: Delivery Condition- Knock Down Dimensions W x H x D (cm)- 100 x 45 x 65 Finish colour- Walnut Primary Material- Solid Wood Net Weight (kg)- 27 Warranty- 1 Year Warranty Style- Contemporary & Modern Wheels Included- No Number of Shelves- 1 ShelfNumber of Drawers- No Drawer

Corner table (Black):- Supplying and placing of Corner table: Delivery Condition- Knock Down Dimensions W x H x D (cm)- 60 x 45 x 60 Finish colour- Black Primary Material- Engineered Wood Primary Material Sub type- Pre-laminated Particle Board Net Weight (kg)- 33

Minor storage unit:- Supplying and placing of Minor storage unit. overall size shall be 765mm (W) x 440mm (D x 1270 mm(H) with welded construction. It should have the shelf thickness of 0.7mm, Back thickness of 0.8mm and all other components shall be 0.9mm thick. These components are made of CRCA ‘D’grade high yield strength as per IS:513. It should have a three-way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting (3 nos.) which shall have a uniformly distributed Load capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).

Removing loose scales, blisters etc. from old painted surface of steel Almirah by chipping including scraping, cleaning and thoroughly smoothening the surface to make the same suitable for receiving heat Chamber Painting after necessary replacement of door, refixing of shelves & alignment, renewing of lock along with key hole cover inclusive of all charges like transpotation, lifting etc. complete at site.

KOLKATA INTERIORS PRIVATE LIMITED (BID ID -5963972)

DESIGN-M (BID ID -5963893)

SANDIPAN (BID ID -5960134)