Installation and making of foundation of Transformer 750 KVA,3.3KV/415V rating with Protective devices near mobile crusher at Karma Project under Kuju Area.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all it including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m 2.8.1 All kinds of soil. Foundation 3 Mtr X3 Mr X1 Mr X218 CUM Yard 20 Mtr X 20 Mtr X050M-200 CUM Structure 1 Mtr X 1 Mir X 0.50 Mtr X 8 Nos 4 CUM

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size) Foundation 3 MX3 Mtr X024 MX2-432 CUM Mess 0.24 Mr X 0.24 Mtr X 0.50 Mtr X 20 Nos-0.57 CUM Structure 0.50 Mtr X 0.50 Mv X0.50 Mb X 8 Nos-1 CUM

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc with charcoal/ coke and salt as required

Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) 2 Mtr X3 Mtr X 0.24 Mtr X2 Wall X 2 Nos= 7.48 CUM 2 Mu X 2.76 Mtr X 0.24 Mu X2 Wall X2 Nos=

Supplying and filling in plinth with sand under floors, Including watering. ramming, consolidating and dressing complete

Providing corrugated G S. sheet roofing including vertical / curved surfacefixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameterwith bitumen and G.I. limpet washers or with G.I. limpet washers filledwith white lead, including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (up to any pitch inhorizontal vertical or curved surfaces), excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing ridges or hips of width 60 cm overall width plain GS sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m

Cement plaster skirting up to 30 cm height, with cement mortar 1.3 (1cement: 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick

upply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for 2 for D.P. structure electric substation switch yard including single post of angla iron size 50x50x5mm, 2.5 mt long should be provided upto 2.00 ml apart or as required. The panel frame with required angle iron/ flat iron members/cross members including mesh welded in frame panel shall be erected between the posts. The angle iron post shall be erected in cement concrete M-15 (1:2:4) (20 mm graded metal) foundation including excavation of pit and refilling the same. The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above groun level. Fencing shall be painted with required shade

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm x 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, Including drilling holes forinsulator pins/ fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required

Erection of pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and uplo 12.00 metre

Supply & Fixing of Aluminium Unarmoured single core flexible type 1100 voltage grade 35 sq mm

Supply & Fixing of Aluminium Tubular Lug 35 sq mm

Transformer Installation & Switch commissioning by providing man power

Supply & Fixing of Nut & Bolts of diiferent size as required

Supply & Fixing of Enamel Paint

Supply & Fixing of Red oxide paint primer

Supply & Fixing of Pad / Palm Connector, aluminium alloy material, 48.60 mm X 12 mm size.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing structure as required. Upto 120 sq. mm

Total impact of GST for the purpose of CTC

Maa Enterprises (BID ID -1158762)