REPAIR PAINTING TO VARIOUS STEEL FURNITURE UNDER BSO OF GE ROORKEE

Amount

Almirah large steel FD-1031 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Shelf

Hinge

Shutter Left/right sheet

Handle

Lock cover

Lock plate

Lock of Godrej/Harison

Locking vertical rod complete assembly

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of almirah large including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Almirah small/medium steel FD-1032 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Shelf

Cleat for shelf

Hinge

Shutter Left/right sheet

Handle

Lock cover

Lock plate

Lock of Godrej / Harison

Locking vertical rod complete assembly

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of almirah small/medium including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair Verandah steel FD-359 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Leg tube conduit complete without shoe

Seat/back short tube conduit

Seat/back long tube conduit

Horizontal rod below seat

Arm rest

Rubber shoe

Plastic white cane canning of seat

Plastic white cane canning of back

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair verandah FD-359 including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair Verandah steel MAP FD/MAP-II/06 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat, made of PVC moulding

Back, made of PVC moulding

Rubber shoe .

Leg (tube conduit) without shoe

Seat/back short tube conduit

Seat/back long tube conduit

Horizontal rod below seat

Arm rest

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair verandah MAP including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair CB steel with arm FD-75 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Complete seat frame with canning

Complete back frame with canning

Arm rest

Frame for arm rest

Leg without shoe

Rubber shoe

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair CB with arm including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair CB steel without arm FD-75 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Complete seat frame with canning

Complete back frame with canning

Leg without shoe

Rubber shoe

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair CB steel without arm including removing dents/spots (if any), tightening the loose joints, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new /welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Bed steel MAP Drg No. FD/E6/MAP/08 (R) /similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Plywood for sleeping

Stiffener

Head Leg without shoe

Foot Leg without shoe

Rubber shoe .

Long rail

Short rail

Head rest particle Bd with MS frame complete

Foot rest particle Bd with MS frame complete

Head rest top horizontal rail

Foot rest top horizontal rail

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of bed steel MAP including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Charpoy MS folding steel FD-388 (R) and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Plywood BWR grade, 12mm thick.

Nut and bolt for ply fixing

Gusset plate with fixing accessories

Flat Iron strip with fixing accessories

Leg without shoe

Rubber shoe

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of charpoy MS folding including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair Easy steel FD-121 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat ply with cushion and rexene black .

Back ply with cushion and rexene black .

Rubber shoe .

Leg without shoe

Seat front/rear/left/right rail

Back vertical rail

Arm rest .

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair easy including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Rack adjustable 6 tier steel FD-106 (M) and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Rack/shelf

Steel angle frame

Nut & bolt fitting

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of rack adjustable 6 tier including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair CBA special with hand rest steel FD-120 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat frame complete with canning

Back frame complete with canning

Hand rest support frame

Hand rest board with fitting accessories

Leg without shoe

Rubber shoe

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair CBA special with hand rest including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair school with hand board steel FD/E6/MAP/05 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Combined Piece of Seat back frame complete with fitting accessories

Hand board support frame

Hand rest board with fitting accessories

Leg without shoe

Rubber shoe

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair school with hand board including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Locker two unit steel FD 127 (M) and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Door shutter without lock

Lock make Godrej /Harison

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of locker two units including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Book shelf open large steel FD-69/ similar pattern:- Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Top/shelf/bottom sheet

MS slot iron

left/right sides sheets

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of book shelf open large including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Book shelf open small steel FD-69/ similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Top/shelf/bottom sheet

MS sloted iron angles

Left/right sides sheets

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of book shelf open small including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Couch examination Massage steel FD-122 (M) and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Complete Cushiobed bedding including top upholstry rexene, cushion, cotton, hassain cloth, spring, coir,copper plated wires, Teak wood plank, cane stick etc.

Aluminium handle

Drawer complete

Bottom plank

Stiffener

Leg without shoe

Rubber shoe

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of couch examination massage including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Table bedside steel MAP Drg No. FD/E6/MAP/15R or similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Rubber shoe

Drawer with handle

Channel (steel)

Door with handle

Hard top complete

Bottom sheet

Back sheet

Side sheet

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of table bed side including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Teapoy verandah steel FD-208, similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Hard top complete

Leg frame complete without shoe

Rubber shoe .

Flat iron top frame complete

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of teapoy verandah including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair writing steel MAP FD/E6/MAP/12 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat ply with cushion and tapestry

Back ply with cushion and tapestry

Rubber shoe .

Leg complete without shoe

Arm rest .

Seat base frame complete

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair writing including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair cushioned with arm, without arm, fixed, revolving FD-75/TP/similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Complete seat

Complete back

Revolving assembly at seat bottom complete with verticle fitting

Chair base complete without castor

Castor best quality

Arm rest best quality

Base steel frame of arm rest

bottom frame complete for non revolving chair

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair cushioned with or without arm including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Chair Auditorium, make RANA Chairs. Drg No. TP/similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat made of ABS plastic with suitable fixing arrangements.

Back made of ABS plastic with suitable fixing arrangements.

Cushion for seat, best quality

Cushion for back, best quality

Tapestry cloth best quality for seat. Colour of tapestry cloth as approved by GE.

Tapestry cloth best quality for seat. Colour of tapestry cloth as approved by GE

Spring for seat (auto lift function), best quality

Spring for back (push back function), best quality

Rod (16 mm square Rod) under seat with suitable fixing arrangements for seat movement.

MS strip at bottom of seat for support of seat for touching from ground

Side ply with suitable fixing arrangements with best quality tapestry cloth cover. Colour of tapestry cloth as approved by GE

MS strip for side ply support

Arm rest handle best plastic as approved by GE.

Chair base steel for mounting it on ground.

M&L for preparing old painted / new steel surfaces of chair auditorium including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Sofa wooden FD-18 or similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Tapestry cloth with coir fibre duly padded with 25mm thick foam of density 40, including spring, plank for seat & back including providing necessary long cloth, hassain cloth and cane stick of 10mm dia for single seater

Leg duly polished

M/s R.K.Jain

JAISWAL ENTERPRISES

VINAYAK CONSTRUCTION COMPANY