Wet waste Processing Unit for 3 Tons in Nagar Panchayat Risia.

Surface Dressing of ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil.

Farth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 mand lift upto 1.5 m, as directed by Engineer-in-Charge 2.1.1. All kinds of soil.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5KM also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete

Providing & Laying of C.C. in 1:6:12 with c/s and 40 mm brick ballast in foundation of Floor i/c all labour, materials and T&P etc.

R.C.C. work in column 1:2:4 with cement, coarse sand, 20 mm pauge stone grit I/c all complete

M150 Brick Work in 1:6 cement and fine sand mortar in sub-structure i/c all labour & T&P etc.

12 mm thk Internal Plaster in 1:3 with c/s mortar in wall i/c all materials, labour & T&P etc. S.I-586

Providing & laying steelbars including cutting binding, placing and complete in all respect

M.S. iron Door and window with ms angle and ms sheet I/c all complete as directed by engineer in charge as chapter 10 S.i no 503

Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work.

Providing and fixing precoated galvanised iron sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or desired by Engineer-in-charge. The sheet shall be fixed using self drilling metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (55x55mm) with EPDM scal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing and laying rectified Glazed Ceramic floor tiles of size 300 x 300 mm or more (thickness to be specified by the manufacturer), of Ist quality conforming to IS: 15622, of approved make, in colours white, Ivory, Grey, Fume Red Brown, Inid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse Sand), jointing with slurry white cement and matching pigments etc, complete

Providing and laying rectified Glazed Ceramic floor tiles of size 300 x 300 mm or more (thickness to be specified by the manufacturer), of Ist quality conforming to IS: 15622, of approved make, in all colours, shades, except white, Ivory. Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse Sand), jointing with slurry white cement and matching pigments etc, complete.

Distepering(First coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J & N Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including prepairing the surface even with sand papered smooth including cost of all materials.

Painting of wood or iron work including sand preparing rubbing and cleaning as reuired for proper completion of work (two coats)

Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved supperior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and 1&P etc. required for proper completion of the work paint to be used should confirm to the I.S.I No. 103

Providing and applying putty of Imm thickness over plastered surface to prepare the surface even and smooth complete

Supply and fixing 32mm thick flush door all complete fitting

Supply and fixing 12 mm thick pre laminated particle bord all complete fitting

Supply and fixing 32 mm thick flush door ply wood with handle fitting all complete

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper carth continuity wire, GP Bux piano type switch and ceiling rose/ungle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc complete in all respect, as directed

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc, complete in all respect.

Wiring Point for plug with 15 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire, Gl Box and piano type switch and socket etc. complete in all respect

SF of 18w hewells make all fitting complete MR

ST of LED 12w hewells make all fitting complete MR

Septic tank of appropriate capacity for 2 years cleaning interval for 50 users

S/F of low density polythene seamless one piece moulded tank and placing the same in proper position includding all

Providing and fixing GI/PVC pipe all fitting

Providing and fixing sanitary pipe all fitting

Providing and fixing WC pan median type with cast iron P and S trap all complete with automatic flushing

Supply and fixing 25mm CPVC pipe in position all complete

Supply and fixing 25mm CPVC pipe in position all complete

Supply and fixing 25 mm dia socket

200 mm dia drilling and 350 mm dia running from ground level to 50 m below ground level in alluvial soil up to sand strata

Supply and lowering of 150 mm dia PVC plain casing pipe

Supply and fixing of 150 mm dia End Cap

Supply and fixing of 150 mm día Top Cap

Supply and fixing of 150 mm dia Centerlizer

P/F 550X400mm hand wash basin of white glazed earthen -ware ISI marked (Hindustan neyer cera make) i/c supply of all materials labour and t&p comp.

P/F flat back 465mm x 355mm x 265mm size lipped from -uninal basin of white glazed earther were first quality (Hindustan Nycer Make) S.I. mark SI No 304

P/F polyvinyl chloride (CPVC) pipe 20mm dia

P/F polyvinyl chloride (CPVC) pipe 15mm dia

P/F bib brass bib cock 400 gms i/e all

Making water connection of Gl pipe line with Gl main as in SI 210

PVC low level cisterns 10 ltr capasity with all internal fittins of PVC etc.

Handpump with submerciable

Please Enable Macros to View BoQ information