Loading…
Loading…
Tender Value
₹20.2 Cr
EMD Value
₹21 L
Closing Date
18 May 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer, Chhotaudepur (R & B) Division, Chhotaudepur
Construction of Government Science College (1200 Student Capacity) at Dumali Dist. Chhotaudepur
303833
02 of 2026-27
Open
Civil Works - Buildings
Chhotaudepur
5 documents required · 5 mandatory
₹18,000
Executive Engineer, Chhotaudepur (R & B) Division, Chhotaudepur
₹21 L
9 May 2026
9 May 2026
9 May 2026
18 May 2026
9 May 2026
Construction of Government Science College (1200 Student Capacity) at Dumali Dist-Chhotaudepur
BILL OF QUANTITIES
Percentage Rate Tender
Item Description of Item Quantity Unit Rate In Amount
1 Excavation for foundation upto 1.5 m depth including sorting 5093.00 Cumt 125.86
out and stacking of useful materials and disposing off the
excavated stuff upto 50 Meter lead.(A) Loose or soft soil
2 Excavation for foundation upto 1.5 to 3 m depth including 1896.00 Cumt 174.56
sorting out and stacking of useful materials and disposing off
the excavated stuff upto 50 Meter lead.(C) Dense or Hard soil
3 Filling in foundation and plinth with sand in layers of 20 cm. 905.00 Cumt 489.28
Thickness including watering ramming and consolidating etc.
4 Filling foundation and plinth with murrum or selected soil in 4140.90 Cumt 304.60
layer of 20 cm in thickness including ramming watering and
consolidating etc. complete
5 Anti-Termite System:Providing and laying of permanent piping 2081.00 Sqmt 63.63
technology anti-termite treatment before flooring work by
installing LLDP (Low linear density polyethylene) tube of 8 mm
O.D. & 6.4 mm 1.D. with inbuilt pressure compensation chip
every 30 cm interval in the tube, having working pressure of
Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and
nails. The LLDP pipe shall be installed at the entire periphery
of the building and at internal network of building at a depth of
20 to 200 mm under floor at every 2 to 3 mtr. c/c distance
(adjusted as per building layout ) & Ends of loop pass through
a PVC elbow of minimum 32 mm ID at junction box of wall and
floor level, entering into a steel reinforced grooved flexible
pipe of minimum 22 mm ID leading into junction box and the
loops shall terminate in junction boxes & test every junction
during injecting chemicals for termite control treatment. The
anti termite chemical Imidacloprid 30.5% SC mix as per IS-
6313 (part III) shall be injected by the pressure pump diluted
with water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm
@ 5 Ltr/SMT. The contractor shall submit approved line plan
for piping system and junction boxes dully approved by
Engineer-in-Charge with bond of 5 year warranty.(II)Anti
Termite chemical injected area (Chemical injecting incl. labour
6 Providing and laying controlled cement concrete M.150 and 1103.00 Cumt 3898.53
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in (A) Foundations
7 Providing and laying controlled cement concrete M.250 and 2125.00 Cumt 4631.86
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in (A)
Foundations, footings, and Mass concrete. footing
8 Providing and laying controlled cement concrete M-250 and 89.00 Cumt 7712.36
curing complete including the cost of form work but excluding
the cost of reinforcement for reinforced concrete work in (d)
columns Up to Plinth level.
Item Description of Item Quantity Unit Rate In Amount
9 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 396.25 Cumt 3106.67
coarse sand : 6- machine cut stone aggregates 40 mm nominal
size) and curing complete excluding cost of formwork in (A)
Foundation and Plinth
10 Providing and laying controlled cement concrete M-200 and 95.00 Cumt 7660.85
curing complete including the cost of form work but excluding
the cost of reinforcement for reinforced concrete work in
Columns, pillars posts and struts G.FLOOR
11 Providing and laying controlled cement concrete M-200 and 69.00 Cumt 7660.85
curing complete including the cost of form work but excluding
the cost of reinforcement for reinforced concrete work in
Columns, pillars posts and struts F.FLOOR
12 Providing and laying controlled cement concrete M-200 and 69.00 Cumt 7702.26
curing complete including the cost of form work but excluding
the cost of reinforcement for reinforced concrete work in
Columns, pillars posts and struts S.FLOOR
13 Providing and laying controlled cement concrete M-200 and 22.00 Cumt 7742.66
curing complete including the cost of form work but excluding
the cost of reinforcement for reinforced concrete work in
Columns, pillars posts and struts T.FLOOR
14 Providing and laying controlled cement concrete M-250 and 401.98 Cumt 4734.19
curing complete including the cost of form work but excluding
the cost of reinforcement for reinforced concrete work in
Ground & Plinth BEAMS
15 Providing and laying controlled cement concrete M-150 and 342.50 Cumt 5277.25
curing complete including the cost of form work but excluding
the cost of reinforcement for reinforced concrete work in
16 Providing and laying controlled cement concrete M.200 and 331.00 Cumt 6267.05
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in (C) Ground
17 Providing and laying controlled cement concrete M.200 and 321.00 Cumt 6267.05
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in (C) F.floor
18 Providing and laying controlled cement concrete M.200 and 321.00 Cumt 6307.45
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in (C) S floor
19 Providing and laying controlled cement concrete M.200 and 8.00 Cumt 6347.85
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in (C) T floor
20 Providing and laying controlled cement concrete M-200 and 11.00 Cumt 6795.28
curing etc. complete including the cost of form work and
reinforcement for reinforced concrete work in (c) Chhajja for
21 Providing and laying controlled cement concrete M-200 and 10.00 Cumt 6795.28
curing etc. complete including the cost of form work and
reinforcement for reinforced concrete work in (c) Chhajja for
Item Description of Item Quantity Unit Rate In Amount
22 Providing and laying controlled cement concrete M-200 and 10.00 Cumt 6836.69
curing etc. complete including the cost of form work and
reinforcement for reinforced concrete work in (c) Chhajja for
23 Providing and laying controlled cement concrete M-200 and 1.00 Cumt 6877.09
curing etc. complete including the cost of form work and
reinforcement for reinforced concrete work in (c) Chhajja for
24 Providing and laying controlled cement concrete M-200 and 9.00 Cumt 7757.81
curing etc. complete including the cost of form work and
reinforcement for reinforced concrete work in (c) Lintal for
25 Providing and laying controlled cement concrete M-200 and 7.00 Cumt 7757.81
curing etc. complete including the cost of form work and
reinforcement for reinforced concrete work in (c) Lintal for
26 Providing and laying controlled cement concrete M-200 and 6.00 Cumt 7799.22
curing etc. complete including the cost of form work and
reinforcement for reinforced concrete work in (c) Lintal for
27 Providing and laying controlled cement concrete M-200 and 1.00 Cumt 7839.62
curing etc. complete including the cost of form work and
reinforcement for reinforced concrete work in (c) Lintal for
28 Providing and laying controlled cement concrete M.200 and 313.50 Cumt 6688.22
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in (C) Ground
29 Providing and laying controlled cement concrete M.200 and 291.00 Cumt 6688.22
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in (C) First Floor
30 Providing and laying controlled cement concrete M.200 and 291.00 Cumt 6729.63
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in Second Floor
31 Providing and laying controlled cement concrete M.200 and 8.00 Cumt 6770.03
curing complete including the cost of formwork and excluding
reinforcement for reinforced concrete work in Third Floor
32 Providing and laying controlled cement concrete M-200 and 11.00 Cumt 7220.49
curing etc. complete including the cost of form work and
excluding the cost of reinforcement etc. complete in (E) Stair
case for Ground Floor to first floor
33 Providing and laying controlled cement concrete M-200 and 6.00 Cumt 7220.49
curing etc. complete including the cost of form work and
excluding the cost of reinforcement etc. complete in (E) Stair
case for First Floor to Second floor
34 Providing and laying controlled cement concrete M-200 and 6.00 Cumt 7260.89
curing etc. complete including the cost of form work and
excluding the cost of reinforcement etc. complete in (E) Stair
case for Second to third floor
Item Description of Item Quantity Unit Rate In Amount
35 Providing and laying controlled cement concrete M-200 and 48.00 Cumt 7254.83
curing etc. complete including the cost of form work and
excluding the cost of reinforcement etc. complete in RCC
Vertical and horizontal wall for Below Plinth & Ground floor
36 Providing and laying controlled cement concrete M-200 and 10.00 Cumt 7254.83
curing etc. complete including the cost of form work and
excluding the cost of reinforcement etc. complete in RCC
Vertical and horizontal wall for G.floor
37 Providing and laying controlled cement concrete M-200 and 9.00 Cumt 7295.23
curing etc. complete including the cost of form work and
excluding the cost of reinforcement etc. complete in RCC
Vertical and horizontal wall for F.floor
38 Providing and laying controlled cement concrete M-200 and 8.00 Cumt 7295.23
curing etc. complete including the cost of form work and
excluding the cost of reinforcement etc. complete in RCC
Vertical and horizontal wall for S.floor
39 Providing and laying controlled cement concrete M-200 and 46.00 Cumt 7335.63
curing etc. complete including the cost of form work and
excluding the cost of reinforcement etc. complete in RCC
Vertical and horizontal wall for T. floor
40 Providing and fixing 90 cm high Stainless steel railing made 66.00 Rmt 3719.83
from anticorrocive 304 grade S S pipe of 50 mm dia (16Gauge)
as hand rail with S S 304 grade Baluster of 38 mm dia
(16Gauge) as a vertical support fixed in RCC slab at 1.2m c/c
including three horizontal S S pipes of 25 mm dia (16Gauge)
at eqal distance fixed by 18.75 mm dia (16Gauge) S S pipe with
baluster including accessories as per detailed drawing as
directed etc. complete.
41 Providing TMT Bar FE 550D reinforcement for R.C.C. work 669464.00 Kg 95.29
including bending, binding and placing in position complete
upto floor top level
Item Description of Item Quantity Unit Rate In Amount
42 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles 1071.00 Sqmt 1674.15
having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for
Extra Strength The Light weight calcium silicate ceiling tiles shall have, light
reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity
resistance and also having thermal conductivity0.043° w/m KC.for the best
thermal Insulation. The Light weight calcium Silicate tile shall be of approved
texture Fine fissured/ Spintone/ Cosmos having NRC value of 0.5 & Globe
having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid
on true horizontal level suspended inter locking metal grid of hot dipped
galvanized steel sections (galvanizing @120 grams per sqm including both
side) consisting of main ‘T’ runner suitably spaced at joints to get required
length and size of 24 X 38mm made from 0.30 mm thick (minimum) sheet,
1200mm centre to centre, and cross ‘T’ of size 24 X 28mm made out of
0.33mm (Minimum) sheet spaced 1200mm along spaced between main 'T' at
600mm centre to centre to form agrid of 1200 x 600mm and size 24x48mm
made of 0.30mm thick (Minimum) sheet to be interlocked at middle of the
1200 x 600mm panel to form grid of size 600x600mm resting on periphery
walls/partitions on a perimeter wall angle pre-coated steel of size (24 x 24 x
3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs
at 450mm centre to centre with 25mm long dry wall screws @ 230mm
interval and laying 15mm thick densified edges light weight calcium silicate
ceiling tiles of approved texture (Fine fissured/Cosmos/Spintone) in the grid
including cutting /making opening for services like diffusers, grills, light
fittings, fixtures, smoke dtectors etc., wheneveer required, Main 'T' runners to
be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed
to ceiling with 12.5mm dia and 50mm long dash fasterners, 4mm G.I.
adjustable rods with galvanized steel evel clips of size 85x30x0.8mm, spaced
at 1200mm center to centre long main 'T' bottom exposed with 24mm of all T-
sections and also provide additional frame work and suspended G.I. support
as required height shall be pre-painted with polyester baked paint, for all
heights, as per specifications, drawings and as directed by engineer-in-charge.
Note:- Only calcium silicate false ceiling area will be measured from wall to
wall. No deducation shall be made for exposed frames/opening (cut outs)
having area less than 0.30sqm. The calcium silicate ceiling tiles shall
fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-
combustible as per B.S. 476 part IV, 100% humidity resistance and also
43 Brick work using common burnt clay building bricks having 1118.00 Cumt 4279.98
crushing strength not less than 35 kg/sq.cm. in foundation and
plinth in cement mortar 1:6 (1 cement : 6 fine sand)
44 Brick work using common burnt clay building bricks having 557.00 Cumt 4568.40
crushing strength not less than 35 Kg/Sq.cm. in super structure
above plinth level upto floor two level in cement mortar 1:6
(1cement : 6 fine sand) Conventional {Ground FLoor}
45 Brick work using common burnt clay building bricks having 315.00 Cumt 4568.40
crushing strength not less than 35 Kg/Sq.cm. in super structure
above plinth level upto floor two level in cement mortar 1:6
(1cement : 6 fine sand)Conventional {First FLoor}
46 Brick work using common burnt clay building bricks having 321.00 Cumt 4611.18
crushing strength not less than 35 Kg/Sq.cm. in super structure
above plinth level upto floor two level in cement mortar 1:6
(1cement : 6 fine sand)Conventional {Second FLoor}
47 Brick work using common burnt clay building bricks having 38.00 Cumt 4653.95
crushing strength not less than 35 Kg/Sq.cm. in super structure
above plinth level upto floor two level in cement mortar 1:6
(1cement : 6 fine sand)Conventional {third FLoor}
48 Half brick masonry in common brunt clay building bricks 385.00 Sqmt 696.50
having crushing strength not less than 35Kg/Sm. In C.M 1:4(
1cement : 4 coarse sand) in super structure. Conventional for
Item Description of Item Quantity Unit Rate In Amount
49 Half brick masonry in common brunt clay building having 416.00 Sqmt 696.50
crushing strength not less than 35Kg/Sm. In C.M 1:4( 1cement :
4 coarse sand) in super structure.Conventional for first floor.
50 Half brick masonry in common brunt clay building having 303.00 Sqmt 702.90
crushing strength not less than 70Kg/Sm. In C.M 1:4( 1cement :
4 coarse sand) in super structure.Conventional for Second
51 Half brick masonry in common brunt clay building having 72.00 Sqmt 709.30
crushing strength not less than 35Kg/Sm. In C.M 1:4( 1cement :
4 coarse sand) in super structure.Conventional for Third
52 Providing and fixing 150 mm wide, approved quality chicken 2779.00 Sqmt 360.77
wire mesh at junction of brick work and RCC work or two
dissimilar surfaces, at all heights fixed by nails, rowal plugs or
tag by cement mortar 1:3 before applying the plaster, including
53 Providing 15mm thick Smooth cement plaster in single coat on 4398.00 Sqmt 231.38
Rough (Similar) side of single or half birck walls / concrete
wall for interior plastering and finished even and smooth in C
M 1:4 (1 cement : 4 coarse sand) with floting coat of neat
cement slurry etc. comp. For Ground floor
54 Providing 15mm thick Smooth cement plaster in single coat on 4722.00 Sqmt 231.09
Rough (Similar) side of single or half birck walls / concrete
wall for interior plastering and finished even and smooth in C
M 1:4 (1 cement : 4 coarse sand) with floting coat of neat
cement slurry etc. comp. For first floor
55 Providing 15mm thick Smooth cement plaster in single coat 4701.00 Sqmt 255.84
on Rough (Similar) side of single or half birck walls / concrete
wall for interior plastering and finished even and smooth in C
M 1:4 (1 cement : 4 coarse sand) with floting coat of neat
cement slurry etc. comp. For second floor
56 Providing 15mm thick cement plaster in single coat on Rough 496.00 Sqmt 280.31
(Similar) side of single or half birck walls / concrete wall for
interior plastering and finished even and smooth in C M 1:4 (1
cement : 4 coarse sand) with floting coat of neat cement slurry
etc. coThird floor
57 Providing 10 mm. Thick smooth cement plaster in single coat 2056.00 Sqmt 213.94
for plastering on ceiling and soffits of stairs and finished even
and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand) with
floting coat of neat cement slurry etc. complete.Ground Floor
58 Providing 10 mm. Thick smooth cement plaster in single coat 1970.00 Sqmt 213.94
for plastering on ceiling and soffits of stairs and finished even
and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand) with
floting coat of neat cement slurry etc. complete. First Floor
59 Providing 10 mm. Thick smooth cement plaster in single coat 1928.00 Sqmt 238.40
for plastering on ceiling and soffits of stairs and finished even
and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand) with
floting coat of neat cement slurry etc. complete second Floor
Item Description of Item Quantity Unit Rate In Amount
60 Providing 10 mm. Thick smooth cement plaster in single coat 58.00 Sqmt 262.86
for plastering on ceiling and soffits of stairs and finished even
and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand) with
floting coat of neat cement slurry etc. complete third Floor
61 20mm thick double coat sand faced cement gutka plaster on 7671.00 Sqmt 353.98
walls upto height 10 metres above ground level consisting of
12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and
8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)
including 1cm x 1cm grooves etc. complete.
62 Providing throating or plaster drip and moulding to R.C.C. 508.00 Rmt 44.07
63 Applying two coats of (white cement based) or (acrylic lappy 19988.00 Sqmt 40.59
(putty)) or equivalent and two coats of primer of approved
brand and manufacture on new wall surface to give an even
shade including thoroughly brushing the surface free from
mortar dropping and other foreign matter and sand papered
smooth. for All floor.
64 Wall painting (two coats) with plastic emulsion paint of 13901.00 Sqmt 84.82
approved brand and manufacture on undecorated wall surface
to give an even shade including throughly brushing the surface
free from mortar droppings and other foreign matter and sand
papered smooth.
65 Wall painting (two coats) with plastic emulsion paint of 6087.00 Sqmt 90.48
approved brand and manufacture on undecorated ceiling
surface to give an even shade including throughly brushing the
surface free from mortar droppings and other foreign matter
and sand papered smooth.
66 Finishing wall with Weather proof exterior 100% acrylic 7646.00 Sqmt 122.14
emulsion paint With one coat of primer on wall surface to give
an required shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose powdered
materials.etc complete for All floor
67 Providing And filling with good quality cinder(steam coal) as 87.00 Cumt 691.85
directed by engineer in charge in sunks in layers of 15 cm
thick,including watering,placing ,ramming well etc as directed,
68 Providing and laying water proofing treatment by conventional 33.00 sqmt 1013.03
method including cleaning the slab surface by wire brush as
directed including provding first layer of C.M. 1:4 of 40 mm
thickness mixed with water proofing compound at rate
prescribed by manufacturer, including putting of brick bats of
average thickness 40 mm Well immerssed in water laid
uniformly on first layer of mortar including applying cement
slurry @ rate of 0.08 bag/sqm. on fixed layer of brick bats
including maintaining necessary slope, in second layer 40 mm
thick C.M 1:4 mixed with water proofing compound as
directed, including finishing smooth with cement slurry as
directed complete.
Item Description of Item Quantity Unit Rate In Amount
69 Providing and laying controlled cement concrete M-200 for 21.90 Cumt 5393.40
RCC work and curing complete including the cost of form work
but excluding the cost of reinforced concrete work in coping on
70 Providing and laying controlled cement concrete M-200 for 3.00 Cumt 5393.40
RCC work and curing complete including the cost of form work
but excluding the cost of reinforced concrete work in coping on
71 Providing and laying controlled cement concrete M-200 for 2.50 Cumt 5434.81
RCC work and curing complete including the cost of form work
but excluding the cost of reinforced concrete work in coping on
72 Providing and laying controlled cement concrete M-200 for 4.50 Cumt 5434.81
RCC work and curing complete including the cost of form work
but excluding the cost of reinforced concrete work in coping on
73 Providing and fixing extruded aluminum window having 430.00 Sqmt 2140.33
extruded aluminum Colour anodized section frame main outer
size 127mm x 38.10mm x 1.35mm (of Jindal Section no:2443,@
Wt.1.384 Kg/mt),horizontal Four track member size
122.20mm x 31.75mm x 1.10mm (of Jindal Section no:8787,@
Wt. 1.205 Kg/mt),vertical member of size 122.20mm x
31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt.
Kg/mt) with sliding shutters of horizontal member size 40mm
x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of
0.456Kg/mt),vertical member of size 40mm x 18mm x 1.29mm
(of Jindal Section no:8947 @ wt.of 0.456 Kg/mt/Section
8948,@ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze
colour tinted float glass with powder coated aluminum fittings
and fixtures and transparent silicon sealant glass fixing to
frame as per details etc complete for window.
74 Providing and fixing window having extruded aluminum 21.00 Sqmt 1713.70
Colour anodized section frame main outer size 63.50 x 38.10 x
1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member
size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt,
vertical member of size 61.85 mm x 31.75mm x 1.30 mm @
wt.of 0.659 Kg/mt with sliding shutters of horizontal member
size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical
member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,
@ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour
tinted float glass with powder coated aluminum fittings and
fixtures and transparent silicon sealant glass fixing to frame as
per details etc complete for window.
75 Providing & Fixing in position standard extruded approved 50.00 Sqmt 3004.75
colour anodised Aluminum Ventilator with outer frame 63.50 x
38.10 x 1.95 mm (of Jindal Section No.4605,@ Wt
kg/Rmt ) with 3mm thick Bajari figure adgesteble tinted
louvers glass fixed to alluminium strip blade including
fixtures, fastenning, labours and equipments as per detailed
drawing as directed. For Ventilators W3 V1 V3
Item Description of Item Quantity Unit Rate In Amount
76 Providing & Fixing in position standard extruded approved 3.00 Sqmt 3336.03
colour anodised Aluminum Ventilator with outer frame 63.50 x
38.10 x 1.95 mm (of Jindal Section No.4605,@ Wt
kg/Rmt ) with 6mm thick Dark glass pannel fixed to
alluminium strip blade including fixtures, fastenning, labours
and equipments as per detailed drawing as directed. For
77 Providing and fixing 35 mm thick flush double door shutter, 215.01 Sqmt 4092.52
solid core with Anodized Aluminium section (jindal door
section no 19552-weight not less than 1.1 kg/mt ) frame size
63.5mm x 38mm inserted Non teak wood frame inside the
aluminium section for durable grip of hinges & Double
shutter with required teakwood batten having 1mm thick
lamination on both side, Durable Grip shall be providing with
both side 15cm long stainless steel handle and necessary
Locking system of Godrej, ,fixtures & fastenings etc. directed
by engineer in charge. D1
78 Providing and fixing 35 mm thick flush single door shutter, 50.00 Sqmt 4175.34
solid core with Anodized Aluminium section (jindal door
section no 19552-weight not less than 1.1 kg/mt ) frame size
63.5mm x 38mm inserted Non teak wood frame inside the
aluminium section for durable grip of hinges & Single shutter
with required teakwood batten having 1mm thick lamination
on both side, Durable Grip shall be providing with both side
15cm long stainless steel handle and necessary Locking system
of Godrej, ,fixtures & fastenings etc. directed by engineer in
79 Providing and fixing FRP frame size 100 x 50 mm and 35 mm 45.00 Sqmt 2362.39
thick FRP depress panel single/Double shutter having extra
reinforcement on sides & edges in Gel coat finish.The core of
the shutter & frame is to be filed up with injected fire retradat
grade polyurethene foam done in situ along with embeded
wooden pieces for stiffening & also taking hinges &
fintures.The whole FRP frame & shutter is to be waterproof,
weatherproof ,termite proof & resistance to mild acid/alkali.
Rates are to be inclusive of S.S hinges with necessary screws &
alluminum fixtures & fastenings & fartener sleeve.Colour and
Shade approved by Engineer-In-Charge.D5,
80 P & L 60x60 cm Mirror polished Blue Kota Stone slab flooring 5287.00 Sqmt 1121.80
over 20 mm (average)thick base of cement mortar 1:6 (1-
cement 6-coarse sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse
sand laid over and jointed with grey cement slurry mixed with
pigment to match the shade of slab including rubbing and
polishing etc.complete (A) 30mm thick
81 P & L 60x60 cm Mirror polished Blue Kota Stone slab 30 mm 189.00 Sqmt 1205.60
thick in riser of steps,skirting dedo and pillars laid on 10 mm
thick cement mortar 1:3 (1-cement 3-coarse sand) and jointed
with grey cement slurry mixed with pigment to match the
shade of slab including rubbing and polishing etc.complete(30
82 P & L Mate Finished antiskid ceramic tiles 30 x 30 cm size 6 212.50 Sqmt 1017.30
mm thick in flooring treads of steps and landing laid on a bed
of 12 mm thick cement mortar 1:3(1-cement:3-coarse
sand)finishing with flush pointing in white cement
Item Description of Item Quantity Unit Rate In Amount
83 P & L premium printed glazed tiles tiles size 30 x 60 cm 6 mm 586.00 Sqmt 1523.67
thick in skirting risers of steps and dedo on 10 mm thick
cement plaster 1:3 (1-cement:3coarse sand) and jointed with
colour cement slurry
84 Providing and laying machine cut free edge machine polished 135.00 Sqmt 935.26
Blue kota stone 25mm thick finished treads and risers in Max
150 cm length with 1cm projecting, nozing rounded moulding
in tread laid over 12 mm (av.) thick bases of cement mortar 1:6
(1-cement : 6-coarse sand) jointed with grey or colour cement
slurry including rubbing and polishing incl. making Three No.s
of grooves of size 3mm X 3mm along the length of treads etc.
85 Providing Plinth Protection to Building including excavation in 711.00 Sqmt 2520.96
ordinary soil and laying cement concrete 1:3:6 using stone
aggregates of 40mm nominal size in foundation layer 125 mm
thick+ 125mm thick sand layer below pre-cast Rubber Dye
inter locking concrete block 60mm thick with grade of concrete
M300 pneumatic compressed by mechanically pressed and as
per approved design including 75mm Sand layer for levelling
and filling the joint with sand in proper line and level etc.
complete, Including Providing and fixing pre-cast concrete
kerb stone of grey cement based concrete block 30cm length,
30cm height and 15cm thick made of M250 grade concrete as
per approved design and including excavation for fixing in
proper line and level, filling the joint with C:M 1:3 (1cement:3
fine sand) etc. complete.
86 Providing and laying broken chine mosaic flooring for terrace 2197.00 Sqmt 779.70
using 12 mm to 20 mm broken pieces of glazed tiles to be laid
over cement mortar 1:3 to plain or slope and to be tempered to
bring mortar creme out upto surface using white cement
including rounding off junctions and extending them upto
cm along the wall,clearing with water and oxalic acid etc. as
87 Providing and laying cement concrete flooring 1:2:4 (1-cement 2197.00 Sqmt 355.69
: 2-coarse sand : 4-graded stone aggregate 20mm nominal size)
laid in one layer and finished with a floating coat of neat
cement. (A) 50mm thick.
88 Providing and fixing mirror polished 18 mm thick Green 588.00 Sqmt 1341.28
Marble stone with full round edge and polished of approved
quality in clading on sill and around the doors/ windows/
ventilation with 20 mm thick cement plaster CM (1:4) and
fixing with cement slurry & adhesive including moulding of
exposed edges as directed by engineering in charge etc.
89 Providing and fixing M.S Safty Grills having 16mm MS bar 510.00 Sqmt 3598.02
Horizontally at every equal 0.10m C/C distance and 2 no of bar
Vertically at every equal 0.375m C/C distance Fixing on around
(5x40) mm Solid MS Patti including cutting, welding and
fabrication etc; including one coat of primer of approved
quality and two coats of oil painting as per detail drawing etc.
complete as per directed Engineer in charge.
90 Providing erecting and fixing double coated Syntex PVC. (ISI) 15000.00 Litre 3.95
water tank of required capacity each with all necessary fittings
and connection etc. complete on terrace.
Item Description of Item Quantity Unit Rate In Amount
91 Providing laying and jointing in true line and level 50mm dia. 180.00 Rmt 195.67
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make
as approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall be
concelled as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
92 Providing laying and jointing in true line and level 40mm dia. 90.00 Rmt 148.12
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make
as approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall be
concelled as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
93 Providing laying and jointing in true line and level 25mm dia. 180.00 Rmt 91.84
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make
as approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall be
concelled as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
94 Providing laying and jointing in true line and level 15mm dia. 180.00 Rmt 72.65
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make
as approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall be
concelled as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
95 Providing, laying and jointing in true line and level 160 120.00 Rmt 834.38
diametre U.P.V.C (Type B) conforming to IS 13592-1992 with
one end plain and other end socketed with rubber ring, &
fittings conforming to ISI 14735-1999 of approved make for
drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 160 mm diametre x 210 mm length x 196 mm
heigh at every 2000 mm center to center or shall be concealed
in walls as directed including necessary fittings such as bends,
shoes etc. including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
96 Providing laying (to level or slopes) and jointing reinforced 642.00 Rmt 678.03
concrete Light duty non-pressure pipes I.S. class NP2 of the
following internal diameter with collars and butt ends
prepared for collar joints including testing of joints
97 Providing, laying and jointing in true line and level 110 611.00 Rmt 897.79
diametre U.P.V.C (Type B) conforming to IS 13592-1992 with
one end plain and other end socketed with rubber ring, &
fittings conforming to ISI 14735-1999 of approved make for
drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diametre x 149 mm length x 145 mm
heigh at every 2000 mm center to center or shall be concealed
in walls as directed including necessary fittings such as bends,
shoes etc. including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
Item Description of Item Quantity Unit Rate In Amount
98 Providing, laying and jointing in true line and level 75 mm dia. 120.00 Rmt 777.10
UPVC SWRType B pipe conforming to IS 13592-1992 with one
end plain and other end socketed with rubbering and fitting
conforming to ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of PVC clamp
at every 2000 mm c/c or shall be conceled in walss as directed
including necessary fittings such as bends, shoes etc. including
testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
99 Providing and fixing in PVC SWR cowel went 75mm dia to 4.00 No 15.66
pipes.(B) 75mm dia.
100 Providing and fixing in PVC SWR cowel went 110mm dia to 11.00 No 28.79
pipes.(B) 110mm dia.
101 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 36.00 No 600.23
100 mm diameter with jali of the following nominal diameter
of self cleansing design with C.I scread down or hinged grating
including the cost of cutting and making good the walls.
102 Providing and fixing wash down water closet (European type 18.00 No 3003.74
W C pan) with integral P and S trap including jointing the trap
with soil pipe in cement mortar 1:1 (1 cement five sand)
including providing and fixing plastic seat cover for wash down
WC with CP brass hinges and rubber buffers back plastic seat
and including providing and fixing PVC flushing tank with a
pair of C I or MS bracket with complete fitting such as lead
valve siphon 15 mm dia brass ball valve with polythene float
CP brass handle unions and couplings for connection with inlet
out let and over flow pipes 40 mm dia porcelain enameled
flush bend including cutting holes in walls and making good
the same connection the flush bend with cistern and closet
vitreous china.
103 Provision and fixing water closet squatting orissa type W.C. 6.00 No 1383.70
pan size 580mm integral footrest and 100 mm P or S trap and
in cluding 25 mm dia CP brass flush valve and GI inlet
connection etc. comp. (A) Vitreous china long pattern white or
color {Hindustan, Cera, Parryware or equivalent }
104 Providing and fixing brass screw down stop tap.(A) 15mm dia. 36.00 No 205.83
105 Providing and fixing ball cock of approved. quality as 2.00 No 189.84
directed.(A) Copper Metal (ii) 50mm dia.
106 Providing and fixing washbasin with single hole for pillar tap 21.00 No 1486.04
with C.I. or M.S. brackets painted white including sutting holes
and making good the same but excluding fittings.(A) Vitreous
China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In
107 Providing and fixing C.P. brass waste for washbasin or sink. (A) 21.00 No 67.91
108 Providing and fixing M.I. fisher union for washbasin or sink. 21.00 No 78.75
109 Providing and fixing 600mm x 450mm bevelled edge mirrror 18.00 No 859.41
of superior glass mounted on 6mm thick A.C. sheet or plywood
sheet and fixing to wooden pluge with C.P. brass screws and
Item Description of Item Quantity Unit Rate In Amount
110 Providing and fixing C.P. brass towel rail comlete with C.P. 18.00 No 616.42
brass brackets fixed to wooden plugs with C.P. brass scews (B)
600mm x 20mm size.
111 Providing and fixing screw down bib taps of following size.(A) 54.00 No 214.81
Brass screw down bib tap polished bright. (i) 20mm dia.
112 Providing and fixing pillar tap, capstan head, screw down high 54.00 No 308.73
pressure with screws, shanks and back nuts. (i) 15mm dia.
113 Providing and fixing in position 300 mm high, 150 mm wide 240.00 No 707.00
English letters made from 1.0 mm thick stainless steel sheet as
directed by Engineer in charge with all necessary tools &
plants etc. complete.
114 Providing and fixing Urinal of approved quality including 12.00 No 1674.15
connection with trap and with integral longitudinal flush pipe.
(A) Squating plate pattern white earthenware 550mm x
115 Providing and fixing Rubber plug for sink or wash basin. 12.00 No 17.15
116 Providing and fixing chromium plated brass half trun flush 36.00 No 263.77
cock of approved quality including fixing in pipe line etc.
complete (ii) 25mm dia.
117 Providing and fixing S.W. gully trap with C.I. grating brick 5.00 No 1246.92
masonry chamber and water tight C.I. cover with frame of
300mm x 300mm size (inside) with standard weight (i) Square
mouth traps (B) 150mm x 100mm size P or R type
118 Constructing brick masonry chamber for underground C.I. 31.00 No 3172.41
Inspection chamber and bends with briocks having croshing
strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover
455mm x 610mm intenal dimensions with frame (R.C.C. top
slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed concrete
etc. complete (i) Inside dimensions 455mmx 610mm and
450mm deep for single pipe line.
119 Constructing brick masonry chamber for underground C.I. 31.00 No 3883.45
Inspection C.I. Inspection chamber and bends with briocks
having croshing strength not less than 35Kg. Cm2 in C.M. 1:5
precast RCC cover 500mmx 700mm intenal dimensions with
frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse
sand :4-graded stone aggregate 20mm size) foundation
concrete 1:5:10 inside plaster 15mm thick with cement mortar
1:3 finished smooth with a floating coat of neat cement on
walls and bed concrete etc. complete (i) Inside dimensions
500mmx 700mm and 450mm deep for single pipe line.
120 Extra over items for every additional depth of 0.1M. of part 15.00 Each 242.39
thereof beyond 450mm depth for Brick masonry chamber.(i)
for 455mm x 610mm size.
121 Extra over items for every additional depth of 0.1M. of part 12.00 Each 264.86
thereof beyond 450mm depth for Brick masonry chamber.(i)
for 500mm x 700mm size.
Item Description of Item Quantity Unit Rate In Amount
122 Providing cement vata (10cm x 10cm size) quarter round in 195.00 Rmt 24.28
cement mortar 1:1 including neat cement finishing watering
123 Providing and fixing MS Ladder of required pattern with MS 300.00 Kg 120.19
flats(30x3mm) or round or square bars (12mm) at required
spacing & with round headed bolts and nuts or screws or
welding including primer coat of approved quality and two
coats of oil paintas as directed by engineer in charge
124 Providing and fixing in position 150 mm high, English letters 80.00 No 404.00
made from 1.0 mm thick stainless steel sheet as directed by
Engineer in charge with all necessary tools & plants etc.
125 Providing and fixing polished 18 mm thick black granite with 11.00 Sqmt 2719.93
full round edge and double side polished of approved quality
in between urinal and fixing with cement slurry & adhesive
including moulding of both exposed edges as directed by
engineering in charge etc. complete.
126 Constructing Platform of 18 mm thick Polished Black Granite 8.00 Sqmt 6235.74
at top and 25 mm thick Kota stone slab one side polished at
bottom with cementing Materials / adhsives including
makeing necessary grooves in walls with Vertical sandwich
two Kotastone 25 mm support every 60 cm centre to centre
or as required including all labour material of approved
quality incl. full moulded round front edge granite strip of one
side polished and jointed with grey cement slurry including
rubbing and polishing etc. complete for all floors
127 provision and fixing of both side polished machine-cut marble 840.00 Sqmt 1616.00
stone shelves/partitions, ranging from 18mm to 20mm in
thickness, securely embedded into the wall through support
fixing using cement slurry and adhesive. The process
encompasses the necessary adjustments such as cutting the
stone to fit as needed, along with the meticulous smoothing of
surfaces to achieve a refined finish, inclusive of all requisite
racking as per directed engineer in-charge.
128 Providing & fixing in position glass partition with standard 171.00 Sqmt 2570.45
extruded colored anodized aluminum frame size 63mm x
38mm x 2mm thick make vertical and horizontal grid distance
as shown in drawing with 12mm thick toughen glass directed
with glass film, fixed with transparent silicon rubber gasket in
panel with glazing clips 19 mm x 17.3mmx1.2mm in size
including fixtures and fastening with required all labour and
equipment and including rebar up to slab level in half partition
and as per detailed drawing as directed with all lead and lift.
129 Providing & fixing in position glass panel with standard 246.00 Sqmt 2729.02
extruded colored anodized aluminum frame size 63mm x
38mm x 2mm thick make vertical and horizontal grid distance
as shown in drawing with 12mm thick toughen glass directed
with glass film, fixed with transparent silicon rubber gasket in
panel with glazing clips 19 mm x 17.3mmx1.2mm in size
including fixtures and fastening with required all labour and
equipment and including rebar up to slab level in half partition
and as per detailed drawing as directed with all lead and lift.
Item Description of Item Quantity Unit Rate In Amount
130 Providing and Fixing Glass Door with Aluminium Frame corner 11.00 Sqmt 8003.42
hinge system with pivot door : Providing and fixing in position
full height 12 mm thick toughened clear glass door with side
fixed glass and all necessary Geze , Dorma hardware
accessories as per approved selection by Architect. 10mm
thick clear toughened glass, edge polished prepared with
stainless steel patch fittings with locking arrangement / fixing
Each glass panel secured to the floor by stainless steel patch
fitting item includes all necessary fitting / fixing, fixtures,
Hardware system ( Corner hinges with pivot Glasklar Lock -
Door Handle Keys ,round shape lock with alluminium cover -
Door Stop complete as per specification drawing approval
and instructions of the Architect. Rate shall be inclusive of all
material loading unloading at all height and all floor. sample
mock shall be approved from Employer's representative/
131 Providing and laying and fixing 50 mm thick expansion joint by 166.00 Sqmt 1491.03
hydro cell semi rigid UV resistance with high performance
laminated closed cell polythene foam joint filler in sheet foam
as directed, etc. complete.
132 Applying and providing Expansion joint sealing System on 100 166.00 Sqmt 4772.00
mm vide joint including cleaning of exansion joint by
mechanical means provision of adhesive and flexible
membrane with required bond length as per menufracturer
specification and 4mm thick alluminium strip covering with
one side sloted and bolted with suitable system, inclusive of all
manpower, machinery and material as per specification and as
133 Providing and filling the expansion joint by Thioflex 600 166.00 Sqmt 515.39
polymer or equivalent confirm to BS 4254-1983 as per
required shade and manufactured specifi-cation by making
groove of 50 mm x 12.5 mm lather by cutting or by repairing
groove and removing mortar drop or any other foreign
materials including applying primer and filling required size
(oversize of joint PU foam etc. complete.
134 Providing and fixing 25 cm Wide & 3mm thick exterior 111.00 Sqmt 1054.34
composite panel on existing expansion joint horizontally &
vertically with all material, hardware, acessories & fittings etc
135 Providing & Fixing 114mm wide G.I. Sheets lovers having 83.00 Sqmt 7824.47
weight not less than 490 Gm/m roll formed to create 84mm
wide louver snap fixed on special shaped GI channel. Fix
louvers & channels shall finished with powder coating of
micron (1) 0.55mm thick sheet.etc. complet as per detail
drawing as directed.
136 Providing & fixing 25mm thick cupboards of plywood shutter 265.00 Sqmt 3298.66
including fixing 19 mm and 6mm thick back to back flush all
proof plywood & including with Teak Wood frame 40 mm x
mm size as directed etc. complete including necessary both
side lamination 1 mm thick outer side & 0.80mm thick inner
side fixing by necessary SS hinges, handles, magnet, stoppers,
etc. as directed including fevicol, and other hardware material
required. Plywood and all fixture shall be of ISI quality and as
approved by engineer-in-charge including cost of teak wood
beading, one coat of primer and two coats of oil painting or
polishing as directed.
Item Description of Item Quantity Unit Rate In Amount
137 Providing and fixing 0.45 meter wide Drinking platform 8.00 Sqmt 3038.08
including supplying and fixing granite stone of black or
equivalant quality 18 mm thick mirror polished on top and
side posiition and vertical strip at front with cement slurry &
adhesive including moulding of both exposed edges over
mm thick kotah stone platform fixing in top and sides and
itermediates supports fixing with cement mortar and adhesive
and finishing all material and labour and assessories with
necessary fitting complete etc.
138 Providing and fixing RCC open channel drainage line with base 245.00 Sqmt 7826.49
and side walls, including excavation, backfilling, PCC (Plain
Cement Concrete) for bedding, reinforcement , formwork, and
the laying of M25 grade reinforced cement concrete for base
slab and side walls. The work includes the installation of a
mm thick steel chequered plate cover on top of the channel,
complete , a. The work shall be carried out as per the
directions and to the satisfaction of the Engineer-in-Charge.
139 Providing and fixing coloured self adhesive PU-Tactile tile, 216.00 Sqmt 4791.44
ground surface indicators of Polyurethane) of size 300mm x
300mm for guiding/warning to the visually visitors in the
centre/side of the pedestrian/approach pathway as per
specification and guidelines complete in all respect to the
entire satisfaction of in charge.
140 Providing and fixing acrylic multilingual Braille (raised dots) 20.00 Nos 1765.48
DIRECTIONAL SIGNBOARDS of size 225 x 150mm designed as
per accessibility standards and having 3.5mm thick acrylic
base plate with Upper Case San Serif words made of white
acrylic non glare cut out letters of height 15mm raised not less
than 0.8mm above base plate and the equivalent word written
in Hindi with Devanagari non glare acrylic letters of height
15mm raised not less than 0.8mm above base plate and having
a non-glare acrylic cut arrow pointing in the required
direction. Each signboard to be fixed as per manufacturers
specifications on the wall at the approved location and at a
height of 1200mm from FFL complete as per design /
specifications and guidelines as per the entire satisfaction of
the Engineer-in-charge
141 Providing & Fixing Braile Indicator Of Size 170 Mm X 35mm 150.00 Rmt 946.37
For Handrails Of The Approved Design And Make Have Braile
Dots Raised 0.5 Mm Above Base Plate To Be Installed At
Specific Locations As Per Direction Of Engineer In Charge
142 Providing and fixing of conspectus tape 50mm width on of 30.00 Rmt 304.01
treads in staircase including cutting pasting etc. As per
harmonised guidelines complete in all respect to the entire
satisfaction of engineer in charge.
143 Providing and Fixing a set of wall mounted 38 mm dia U 6.00 Set 2730.03
shaped horizontal stainless steel collapsible grab bar , 38mm
vertical stainless steel fixed grab rail of grade SS 304 from
round pipe supported and 75 mm dia 8 mm thick SS 304 base
flange on wall including anchor fasteners, nuts, accessories as
per detailed drawing etc. complete as directed by Architect or
Engineer in charge.
Item Description of Item Quantity Unit Rate In Amount
144 Providing and fixing EURONICS 304 Stainless Steel Handicap 12.00 Nos 3368.35
Grab Bar, Size 600 millimeter, including all necessary fittings
and fixtures, complete as per the direction of the Engineer-in-
145 Excavation for foundation for depth from 3.0 m to 5.0 m 83.00 Cumt 187.29
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(B) Dense
146 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size 2.00 Nos 958.17
having weight not less than 35Kg.
147 Providing & erecting open well horizontal mono block pump 2.00 Nos 36107.50
set with cast iron body, complete for three phase submersible
motor having [H]For 15 H.P,3 phase open well horizontal mono
block pump set suitable for 1600 LPM to 1025 LPM @ 33 to
MTR head suitable for 65/80 mm dia delivery pipe
148 Supplying & erecting approvedmake 3 phase motor control 3.00 Nos 19695.00
cubicalpanel (Star-Delta) made from 16G.CRCA sheet duty
painted with epoxy powder painted inside and outside with
hinged doors and locking arrangement, consisting suitable size
of ON-OFF isolator (AC- 3/23duty) main fuses,single phasing
preventer cum water level, Guard(Compe unit), Toggle switch
to by pass Single phase preventercum WLG,indicating lamps
forR-Y-Bphases, over load relay.Automatic water level
controller, Ammeter &Voltmeter each with two way selector
switch incoming wires duty socket Crimped,Panel to be
erected on angle iron frame grouted on wall as overload
relay,thermal/Electronics star delta cutoff timer,start-stop
push buttons.The isolator overload relay &cntractors
ofL&T,Siemens or Cuttler Hamer make only.Panel to be erected
on angle iron frame ground on wall (e)S/D upto 2.5 H.P.
149 Providing and fixing rolling shutters of approved make made of 10.00 Sqmt 3554.40
80 mm wide M.S laths inter-locked together through heir
entire length and jointed together at the ends by end locks
mounted on specially designed pipe shaft with bracket
plates,guide channels and arrangement for inside and outside
locking with push-pull operation including the cost of hood
cover and sprig etc.complete(A) Shutters having width below
150 Constructing brick masonry chamber for underground C.I. 20.00 No. 7180.44
Inspection chamber and bends with briocks having croshing
strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with
frame (Light duty) 455mm x 610mm intenal dimensions, total
weight of cover with frame to be not less than 38Kg. (Wt. of
cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with
1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete.(iii) Inside dimensions 600mm x 850 mm and
450mm deep for pipe lines with three or more inlets.
Item Description of Item Quantity Unit Rate In Amount
151 Providing and laying (two level or slopes) and jointing with 240.00 Rmt. 803.21
stiff mixture of Cement Mortar in proportion 1:1, Salt glazed
stone ware pipes of pipes 150mm laying lime concrete 1:2:4 (1-
Lime putty :2-Fine samd : 4-Graded brick aggregates 40mm
nominal size) bedding for stoneware pipes of following
internal diameters with necessary formwork and curing
152 Box cutting the road surface to proper slope and camber for 615.00 Cum. 112.01
making a base for road work including removing the excavated
stuff and depositing on the road side slope as directed upto
153 Construiction of 100/200 mm thick compacted granular sub 362.00 Cum. 1294.63
base (Garde- I, crushed B T materials of 53 mm to 9.5 mm @
providing close graded material , mixing in mechanical mix
plant carriage at OMC, carraige of mixed material to site,
spreading in uniform layers with mortor grader on prepared
surface and compacting with vibratory power roller to achieve
the desired density, complete as per clause
154 Providing, laying, spreading and compacting graded stone 430.00 Cum. 1188.08
aggregate to wet mix macadam specification including
premixing the material with water at OMC in mechanical mix
plant carriage of mixed material by tipper to site, laying in
uniform layers with paver in sub-base / base course on well
prepared surface and compacting with vibratory roller to
achieve the desired density.
155 Compaction and finishing of cement concrete road by trimix 2295.00 Sqm. 63.63
M.250 process providing extra Labour charges for the trimix
vacume dewatering service process on cement concrete road
sutface by using vacuum dewatering pump floater surface
vibrator including making groves and rough finish to surface
including leveling etc complete.
156 Providing and fixing pre-cast Rubber Dye / steel Dye inter 3924.00 Sqm 707.54
locking concrete block 60mm thick with grade of concrete
M300 pnumatic compressed / vibrated mechanically and as
per approved design Confirming to IS 15658 : 2006 including
35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidlines of IRC : SP 63-2018 etc.
157 Providing and fixing pre-cast concrete kerb stone of gray 844.00 Rmt. 374.92
cement based concrete block 30cm length,30cm height and
15cm thick of M250 grade concret as per approved design and
including excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc complete.
158 Drilling of min. 250 mm dia. bore hole in all strata including 310.00 Rmt 1270.58
dualover burden strata by combination DR/DTH rig including
lowering 200 mm dia MS ERW pipes in bore hole and testing
etc.all work as per directed engineer incharge.
159 Manufacture, supply and delivery of cage typeTrapezoidal 200.00 Rmt 1682.66
shape ( ' V ') wire wound low carbon, Galvanized screen pipe
and Stainless Steel Screen pipes, confirming IS: 8110 For (B)
200mm dia 1) 1.00mm Slot size
Item Description of Item Quantity Unit Rate In Amount
160 Bore plug having 100 mm height made from M.S. plate with 3 2.00 No 1161.62
holes at equal distance on circumference for nut-bolts type,
locking arrangement with nuts-bolts & lock nuts of std. Make
complete. For 250mm dia
161 Providing PVC insulated flat submersible cable as per detailed 400.00 Rmt 180.79
technical specifications of R/C of GWSSB conforming to IS
162 Suppling and installing 3 Phase Borewell 15.00 HP 2.00 No 37160.93
Submersible Pump Sets Electric motor driven conforming to
I.S. 8034 and motor conforms to IS-9283 working at 3 phase
400/440 volt 50 C/S A.C. supply & 2900 R.P.M. cat
163 Providing and fixing check or non return pully wheel valve of 4.00 No 1111.00
50 mm diameter.
164 Providing and fixing to wall,ceiliing and floor galvanised mild 300.00 Rmt 787.40
steel tubes ( Medium grade ) of the following nominal bore,
tube, fittings and clamps included making good the wall,
ceilling and floor (F) 50 mm
165 Supplying and lowering ISI-mark edunplasticized PVC (uPVC) 80.00 Rmt 393.90
casing pipe,200 mm outer diameter,as per IS:12818
166 Supply of Gravel of selected size 4 mm to 6 mm 80.00 Cum 2020.24
167 Geohydrological ground water investigation including vehicle 2.00 Nos 14428.86
charges for three phase DTH bore/DR tube well including
water sample testing & chemical analysis
168 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 240.00 Rmt 339.05
working pressure poluthene pipes of the following outside Dia.
Low densidy, complete with special falnge compression type
fittings, wall clipsetc. including making good the wall ceiling
and floor.(G)110 mm
169 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 260.00 Rmt 696.90
working pressure poluthene pipes of the following outside Dia.
Low densidy, complete with special falnge compression type
fittings, wall clipsetc. including making good the wall ceiling
and floor.(G)160 mm
170 Providing junction for rain water juncton chamber of size 26.00 Nos. 9112.22
0.60x0.60x0.75m with excavation of size 1.96x1.96 m & 0.15m
thick c.c.1:2:4 bed concrete including brick masonary wall in
CM 1:6 of 0.75m height & 0.23m thick with 15mm thick cement
plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of
thickness 0.15m with CRS steel and 0.60mx0.45m cast iron
manhole cover with frame weight not less than 35 kg as per
directed by Engineer-in-charge
171 Providing Filter chamber of Brick work in C:M 1:6 of size 8.00 Nos. 15440.88
2.06mx1.20m x1.20m & excavation dimension of 2.66mx
1.81x1.35m including C.C 1:2:4 bed concrete of 0.15m thick
including brick work in c.m 1:6 for 23cm thick wall including
15mm thick cement plaster inside & outside with cement
slurry & 10cm thick RCC 1:2:4 top cover with frame of
minimum weight of 35 kg & filling filter material kapchi in
layers (25-40mm & 10-20mm) & BT metal 40mm & sand as
per directed by Engineer-in-charge.
Item Description of Item Quantity Unit Rate In Amount
172 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of 3.00 Nos. 7986.07
water logging with excavation filling the pit with gravel & sand
in layers including making 300mm dia bore depth of 4.5mt &
above concrete with kapchi in layers (25-40mm & 10-20mm)
& BT metal 40mm & filling brick as directed by Engineer-in-
173 Providing and laying controlled cement concrete M-250 and 831.60 Cumt 6065.05
curing complete including the cost of form work but excluding
the cost of reinforcement for reinforced concrete work in
174 Providing and filter media 600mm thick as directed at the back 411.70 Sqmt 1268.86
of Protection Wall as per detailed specification.
175 Providing and fixing concertina coil fencing with punched tape 420.00 Rmt 579.74
concertina coil 600 mm dia 10 mt openable length having
no rounds per 6 mt length, upto 3mt height of wall with
existing angle iron (50mm x50mm x5mm )requird shaped As
per Directed Engeenier in charge. placed 2.4mt or 3.00mt apart
and with 4 horizontal R.B.T. reinforced barbed wire(3 mm)
stud tied with G.I. staples and G.I. clips to retain horizontal,
including necessary bolts or G.I.barbed wire tied to angle iron,
all complete as per direction of Engineer-in-charge, with
reinforced barbed tape (R.B.T.)/Spring core (2.5 mm thick) and
weight 43.478 gm/meter at compound wall for ESR M4/
176 Constructing providing and fabricating cattle guard using 9.00 Sqmt 5155.04
channel section frame of size ISMC series 100 mm x 50 mm
(Weight 9.20 kg/Rmt) and ISMC section 100 mm x 75mm
(weight 11.50 kg/Rmt) intermediate support for welding
G.I.pipe at 12 Cm C/C of size 50 mm in a frame made of
Channel section size 100 mm x 50 mm all round including
fixing the unit on prepared chamber of masonary wall using
MS hold fast embeded in masonary wall top as directed by
Engineer in charge and as per drawing and necessary required
arrangement etc complete.
177 Providing and fixing decorative entrance gate made out of cast 1407.00 Kg 176.75
iron and various mild steel tabular section combination , the
Ornamental entrance gate should be fixed at compound wall
including pattern and die making , cutting , welding , grinding,
fabrication , fixing in position at compound wall with necessary
pedestal, bearing block and other locking arrangement. The
entrance gate should be painted with two coats of priming coat
of paint, and two coat of oil paint etc complete. As per detail
design and instruction of architect.
178 Steel work, welded in built up sections framed work including 21350.00 kg 91.08
cutting, hoisting, fixing in position and applying a priming coat
of read lead paint & two coat oil paint. (A)In beams and joists,
channels angles Tees, flats, with connecting plates or angle
cleats as in main and cross beams. Hip and jack rafters, purlins
conneted to common rafters and the like..
Item Description of Item Quantity Unit Rate In Amount
179 Providing and fixing of Ridge flashing for roof panel shall be 764.00 Sqm 867.39
made out of 0.5 mm thick pre coated GI sheet . The Precoated
sheet shall be of minimum 240 mpa steel grade confirming to
IS 14246:1995 and shall have zinc coating of minimum
gsm as per IS:277:1992 , 5-7 microns epoxy primer on both
side of the sheet and polyester top coat 15-18 micron. The
PPGI Sheet shall have plastic protective guard film of minimum
25 microns to avoid scratches during transportation. The ridge
shall be fixed to the steel members by pop rivet or self
drilling/self stitching fastners @ maximum 450 mm c/c along
length of capping/flashing etc complete .
180 Earthwork for embankment including breaking clods, dressing 45234.00 Cum 173.31
with all lead and lift (excluding watering and consolidation)
(E) From Borrow area within 3.0 Km. lead
181 Rolling of Earth work in layers with power roller including 45234.00 Cum 23.18
filling in depressions which occure during the process.
182 Filling available excavated Earth (Excluding Rock) in trench 74.00 Cumt 137.47
plinth side of foundation . in layer not excluding 20 cm in depth
consolidation each deposited layer by ramming and watering
183 Excavation for foundation in sand, gravel, clay soft soils and 1308.00 Cum 523.28
murrum etc. including shoring, strutting dewatering as
necessary and disposing of the excavated stuff as directed.(A)
Depth upto 3.0 M.
184 Providing and filling in foundation with ordinary Cement 146.00 Cum 3341.41
concrete M-100 mix and providing necessary vertical pin
headers including formwork, vibrating, ramming and curing
185 Providing and casting in situ ordinary cement concrete M- 2036.00 Cum 3966.27
200 mix and providing necessary pin headers including
shuttering, scaffolding, laying, vibrating, curing and finishing
complete without V-Groves. (A) Height from 0.0 M. to 5.0 M.
186 Providing and fixing in position ISI Mark T.M.T. Bar 500D Fe 7600.00 kg 73.86
reinforcement for R.C.C. work including bending, binding and
placing in position complete upto floor two level for
temperature reinforcement for Mass concrete
pier/Abutment/Returns including cutting, bending and tying
as required complete.
187 Providing and casting in situ ordinary cement concrete M- 18.00 Cum 4902.54
250 for R.C.C. works in pier cap abutment cap and dirt wall
including controlled cement concrete M-250 Bed block or
pedestal or required size below bearings as per detailed
drawings, centering, scaffolding, curing &, vibrating & finishing
188 Providing and casting in situ ordinary Cement concrete M- 62.00 Cum 4773.26
250 for R.C.C. solid slab including centering, scaffolding
curing and finishing complete.
189 Providing and casting in situ ordinarycement concrete M-200 9.00 Cum 4445.01
for average 75 mm thick wearing coat laid as directed
including tamping ,vibrating, finishing, curing and filling in
joints with bitumen complete.
Item Description of Item Quantity Unit Rate In Amount
190 Providing and fixing in position mild steel dowel bars in pier 10.00 No 341.29
cap or abutments caps for anchorage in fixed end as per
detailed drawings including cutting, bending and welding
191 Providing and fixing in position mild steel dowel bars in pier 10.00 No 399.70
caps for anchorage in free end as per detailed drawings
including cutting, bending and welding complete.
192 Providing and filling sand behind abutments and between 67.00 Cum 478.82
returns in layers as directed.
193 Providing and laying weep hole in Aburtments, and returns 374.00 No 88.76
by using A.C. pipe of 100mm including laying in proper grede
and jointing the completed as per detailed specification.
194 Providing G.I./ PVC 100mm diameter water spouts including 6.00 No 536.03
necessary iron gratings as per drawings.
195 Providing temporary all weather and fair weather diversion 2.00 Lump 50500.00
suitable for the traffic during construction period of the bridge
including providing necessary drauns pipes , and all safety
measures including red lamps/signals at night for traffic etc.
196 Dismentaling the existing structure including removing and 27.00 Cum 952.51
stacking the dismentelled materials as and where directed. (A)
197 Dismentaling the existing structure including removing and 132.00 Cum 418.97
stacking the dismentelled materials as and where directed. (B)
198 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 837.00 Pt. 485.81
1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS
PVC insulated multi strand copper wires up to 10 mtr length
in below type of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of following type,
erected on PVC / Metallic/Wooden box, single mounting base
frame covered with textured/metallic/white front plate
modules erected on / in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose / H.D.Connector as
directed. with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete Cat. III
199 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 383.00 Pt. 674.68
sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in
below type of pipe erected with 6A Modular type switch and
hum free EME step type electronic fan regulator mounted and
accessories with earth continuity of following type erected on
PVC / Metallic/Wooden box, single mounting base frame
covered with textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected. with
necessary ceiling rose / H.D.Connector as directed. with
medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete.Cat. III
Item Description of Item Quantity Unit Rate In Amount
200 Point wiring for Individual Plug with & earth wire of 1.5 2.00 Pt. 510.05
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in
below type of pipe erected complete with Modular type switch
& 5 pin Plug erected on PVC / Metallic/Wooden box covered
with appropriate front plate modules erected on / in wall /
ceiling as per pipe erected with following type of accessories.
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from
nearby switchboard/mcb db board with medium class Rigid
PVC pipe and accessories erected concealed in wall/ceiling
complete Cat. III
201 Point wiring for Individual Plug with & earth wire of 1.5 3.00 Pt. 745.38
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in
below type of pipe erected complete with Modular type switch
& 5 pin Plug erected on PVC / Metallic/Wooden box covered
with appropriate front plate modules erected on / in wall /
ceiling as per pipe erected with following type of accessories.
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.
Wire from mcb db board.with medium class Rigid PVC pipe
and accessories erected concealed in wall/ceiling complete
202 Point wiring for on board Looped Plug with 6A Modular type 145.00 Pt. 257.55
switch & 5 pin socket erected on PVC / Metallic/Wooden box,
single mounting base frame covered with textured /
metallic/white front plate modules erected on / in wall /
ceiling with following type accessories Cat. III
203 Providing following type of Modular Type Accessories 27.00 Nos. 151.50
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (1)One No. SP 6 Amp.
204 Providing following type of Modular Type Accessories 27.00 Nos. 151.50
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (2) One No 5 pin
205 Providing following type of Modular Type Accessories 248.00 Nos. 25.25
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (7) Blank Plate Single
206 Providing following type of Modular Type Accessories 13.00 Nos. 180.79
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (9) 16 Amp. SP one
way switch Cat.III
Item Description of Item Quantity Unit Rate In Amount
207 Providing following type of Modular Type Accessories 37.00 Nos. 199.98
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (10) 6/16Amp.
Universal socket Cat.III
208 Providing following type of Modular Type Accessories 24.00 Nos. 410.06
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
modules erected with necessary connections as per site
situation directed by Engineer In charge. (14) 6A/ 10A/ 16A/
20A/ 25A/ 32A Double Pole Modular MCB Switch
209 Providing and erecting ISI mark Medium class RIGID PVC 1848.00 Mtr. 24.24
PIPES of following size complete to be erected on/in wall or
ceiling erected with necessary PVC fittings & Junction boxes
fixed with adhesive solution & Clamps with following dia of
pipes, in approved manner as directed 20 mm
210 Supplying and laying UPVC cable trunking system comprising 48.00 Mtr. 277.75
unplasticised polyvinyl, chloride rigid material with ignition
free and flame proof confirming BS with necessary end caps
Internal and external bend, flat bends, coupler, tee etc..All
necessary accessories and measuring of following sizes (1)
mm x 50 mm trunking
211 Providing and erecting Mains with 1.1 KV grade FRLS PVC 3924.00 Mtr. 82.82
insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected concealed in /flushed on
wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of
following size With medium class Rigid PVC pipe and
accessories 2 wire 2.5 sq. mm
212 Providing and erecting Mains with 1.1 KV grade FRLS PVC 480.00 Mtr. 112.11
insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall / ceiling with
2.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size with
medium class Rigid PVC pipe and accessories 2 wire 4 sq. mm
213 Providing and erecting Mains with 1.1 KV grade FRLS PVC 30.00 Mtr. 147.46
insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall / ceiling with
2.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following sizewith
medium class Rigid PVC pipe and accessories wire 6 sq. mm
214 Providing and erecting Mains with 1.1 KV grade FRLS PVC 600.00 Mtr. 260.58
insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall / ceiling with
2.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size with
medium class Rigid PVC pipe and accessories 4 wire 6 sq. mm
Item Description of Item Quantity Unit Rate In Amount
215 Providing and erecting Mains with ISI marked, 1.5KV grade 228.00 Mtr. 56.56
electrolyte multi stranded, annealed copper conductor with
heat resistant PVC insulated conforms to IS 694, IEC -
erected in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs, nuts and
bolts if required. One wire 6.00 sq. mm
216 Providing and erecting Mains with ISI marked, 1.5KV grade 56.00 Mtr. 300.98
electrolyte multi stranded, annealed copper conductor with
heat resistant PVC insulated conforms to IS 694, IEC -
erected in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs, nuts and
bolts if required. One wire 35.00 sq. mm
217 Supplying and erecting Flexible PVC insulated multi strand 1848.00 Mtr. 22.22
multi core 1.1 kv grade ISI marked copper wires of following
size to be erected as directed. 1.00 Sq.mm 2 core round/ flat
218 Supplying and erecting Flexible PVC insulated multi strand 294.00 Mtr. 46.46
multi core 1.1 kv grade ISI marked copper wires of following
size to be erected as directed. (e) 1.50 Sq.mm 3 core round PVC
219 Providing & erecting Switch board for Computer or electric 142.00 Nos. 1133.22
apparatus consisting of following modular type accessories
mounted with PVC / Metallic concealed/open box with single
mounting base frame covered with textured/metallic /white
front plate,modules erected with necessary connections as
directed 1 no. 6A/16A universal plug-switch combined. 3 nos.
6A Switch 3 nos. 6A 5 pin Plug For Modular Type
Accessories Cat. III
220 Decorative call bell Ting-tong box type 250 volts complete 2.00 Nos. 71.71
221 Supplying and erecting LED indoor fittings with LEDs of 700.00 Nos. 535.30
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with
housing used as a heat sink shall be made of thick sheet Steel
conforming to IS: 513/CRCA/ aluminium die cast powder
coated and high U.V. & corrosion resistance with diffuser with
company mark/name 160V to 270V, Power Factor more than
0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>
85 lumens/watt ,LED LED driver efficiency > 85 % (fitting
required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) Tube Light with integral driver 36-
40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll
222 Supplying and erecting led lamps with following wattage 24.00 Nos. 112.11
capacity of 220 to 240 voltage, minimum 15000 burning hours
life, 500 V in built-surge protection,Polycarbonate diffuser,
mounting suitable for E14 / E27 / B22 lamp holders, pf >=
(A) LED Lamps integral type, with PC diffuser suitable LAMP
holder (ii) 5 to 8 watts Cat-III
Item Description of Item Quantity Unit Rate In Amount
223 Supplying and erecting LED indoor fittings with LEDs of 68.00 Nos. 1794.77
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with
housing used as a heat sink shall be made of thick sheet Steel
conforming to IS: 513/CRCA/aluminium pressure die cast
powder coated and high U.V. & corrosion resistance with
diffuser housed in aluminium casted body with company
mark/name 160V to 270V,Power Factor more than 0.95, THD <
15 %, CCT 3000 K to 6500K, Luminaire efficacy>
lumens/watt , LED driver efficiency > 85 % ( fitting required
LM-79 & LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer
incharge may select any wattage capacity between the ranges
shown.)LED Panel Light with provision for Plane front frame
with translucent cover fixed to housing complete.IP20
watts, 24" x 24", Surge- 2KV Cat-lll
224 Supplying and erecting LED street light / Flood light fittings 46.00 Nos. 5976.17
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85%.
(fittings required LM-79 & LM-80 certificates) (NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown) Street Light (IP-65), Surge
protection -4KV integral and Light must have 440VAC line
supply with over-voltage protection. Above 60 to 90 watts Cat-
225 Supplying and erecting LED street light / Flood light fittings 8.00 Nos. 9647.52
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.
(fittings required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings. The Engineer incharge may select any wattage capacity
between the ranges shown) Flood Light (IP-65), Surge
protection -4KV integral and Light must have 440VAC line
supply with over-voltage protection. above 160 to 200 watts
Item Description of Item Quantity Unit Rate In Amount
226 Supplying and erecting LED street light / Flood light fittings 2.00 Nos. 4819.72
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(
fittings required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) Post Top Lantern LED fitting
comprises of finish cast aluminum spigot and spun aluminum
canopy fixed with opal polycarbonate, pipe arrangement for
vertical mounting driver and accessories wired upto terminal
block.IP 65 32-40W Cat-lll
227 Pproviding and erecting Approved make Four pole moulded 1.00 Nos. 6173.12
case circuit breaker having breaking capacity ICU of 25 KA. at
415 V,having normal current rating up to 25 A to 100A. with
Fixed thermal & magnetic release suitable to work on A.C.
supply 50 c/s. with all internal connections, spreader tinned
copper & complete erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
228 Providing and erecting Approved make Four pole moulded 5.00 Nos. 8055.76
case circuit breaker having breaking capacity ICU of 35 KA. at
415 V. having normal current rating 125A. with Fixed thermal
& magnetic release suitable to work on A.C.supply 50 c/s. with
all internal connections, spreader tinned copper & complete
erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat
229 Providing and erecting Approved make Four pole moulded 3.00 Nos. 16221.61
case circuit breaker having breaking capacity ICU of 35 KA. at
415 V. having Normal current rating 200A.with variable
Thermal & magnetic release suitable to work on A.C.supply
c/s. with all internal connections, spreader tinned copper &
complete erected in existing 16 G.M.S.housing ICS=100% of ICU
230 Providing and erecting Approved make Four pole moulded 2.00 Nos. 20946.39
case circuit breaker having breaking capacity ICU of 35 KA. and
above at 415 V . having normal current rating 250A. with
variable thermal & magnetic release suitable to work on
A.C.supply 50 c/s. with all internal connections, spreader
tinned copper & complete erected in existing 16 G.M.S.
housing. ICS=100% of ICU only Cat III
231 Supplying & erecting approved make Four Pole 415V change 1.00 Nos. 13353.21
over switch interior for panel mounting with operating
mechanism A.C.23 duty confirming to IS for 250A / 320A Cat-
Item Description of Item Quantity Unit Rate In Amount
232 Supplying and erecting triple pole & neutral 440V / 500V panel 2.00 Rn. 1961.42
mounting Copper Busbars with four equal Nos. of electrolyte Mtr.
bus having current density not more than 1.6 Amp. / sq.mm
(Rated current / cross section area) duly wrapped with colour
insulating tape for phase sequence of following current
carrying capacity, erected with necessary bus bar supports
/insulators, main cable socket to each bar, erected in existing
cubical panel with necessary connections. Suitable for
233 Supplying and erecting triple pole & neutral 440V / 500V panel 1.00 Rn. 3202.71
mounting Copper Busbars with four equal Nos. of electrolyte Mtr.
bus having current density not more than 1.6 Amp. / sq.mm
(Rated current / cross section area) duly wrapped with colour
insulating tape for phase sequence of following current
carrying capacity, erected with necessary bus bar supports
/insulators, main cable socket to each bar, erected in existing
cubical panel with necessary connections. Suitable for
234 Supplying and erecting triple pole & neutral 440V / 500V panel 1.00 Rn. 4909.61
mounting Copper Busbars with four equal Nos. of electrolyte Mtr.
bus having current density not more than 1.6 Amp. / sq.mm
(Rated current / cross section area) duly wrapped with colour
insulating tape for phase sequence of following current
carrying capacity, erected with necessary bus bar supports
/insulators, main cable socket to each bar, erected in existing
cubical panel with necessary connections. Suitable for
235 Providing and erecting Miniature circuit breaker single pole 56.00 Nos. 270.68
0.5A to 2A system and having breaking capacity 10 KA to be
erected in existing box. confirming to IS 8828/1996 with ISI
236 Providing and erecting Miniature circuit breaker single pole 6A 256.00 Nos. 112.11
to 25A suitable to operate on 240 V A.C. system and having
breaking capacity 10 KA to be erected in existing box.
confirming to IS 8828/1996 with ISI Mark Cat.III
237 Providing & erecting 240 V MCB double pole switch for lighting 1.00 Nos. 278.76
Load (B Curve) having 10 KA breaking capacity & confirms to
IS : 8828 in existing box having following capacity6 to 32 Amp.
238 Providing & erecting 240 V MCB double pole switch for lighting 4.00 Nos. 295.93
Load (B Curve) having 10 KA breaking capacity & confirms to
IS : 8828 in existing box having following capacity 40 Amp.
239 Providing & erecting 415V MCB Four Pole Switch for Lighting 50.00 Nos. 638.32
Load (B curve) having 10KA breaking capacity & confirms to IS
:8828 in existing box having following capacity40 Amp. Cat.III
240 Sheets steel powder coated enclosure suitable for 3.00 Nos. 176.75
incorporating One/Two nos. MCB.
Item Description of Item Quantity Unit Rate In Amount
241 Providing and erecting Sheet Steel powder coated MCB 2.00 Nos. 1492.78
distribution board - flush / surface mounted fitted with busbar,
neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &
IEC 61439-1 & 3 without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of MCB to be
used) suitable for single phase incoming and horizontal single
phase outgoing sheet steel double door (IP-43) (iv)12 way
242 Providing and erecting Sheet Steel powder coated MCB 20.00 Nos. 2339.16
distribution board - flush / surface mounted fitted with busbar,
neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &
IEC 61439-1 & 3 without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of MCB to be
used) suitable for three phase incoming and single phase
horizontal type outgoing Per phase isolation type (PPI) sheet
steel double door 4 way
243 Providing and erecting Approved make RCCBs conforming to 4.00 Nos. 1969.50
IS: 12640 and having sensitivity of 30 mA and Short Circuit
withstand capacity of 10 KA and suitable for operation on
single phase 240 V,50Hz. having characteristic of quick action
& tripping with all advance feature & do not incorporate any
electronic component. for following Max. rating erected as
directed 25 Amps.DP Cat. III
244 Providing and erecting Approved make RCCBs conforming to 61.00 Nos. 2235.13
IS: 12640 and having sensitivity of 30 mA and Short Circuit
withstand capacity of 10 KA and suitable for operation on
single phase 240 V,50Hz. having characteristic of quick action
& tripping with all advance feature & do not incorporate any
electronic component. for following Max. rating erected as
directed 40Amps. DP Cat. III
245 Providing and erecting Annealed bare Copper wire 8 to 16 25.00 Kg. 794.87
246 Providing and erecting HOT deep Galvanised iron strip wire 8 66.00 Kg. 77.77
247 Providing and erecting Pipe type earthing having 150 cms.long 17.00 Nos. 368.65
and 2.5 cms. dia. galvanised iron pipe with coupling and buch
buried in specially prepared earth pit complete with necessary
8 SWG earth wire.
248 For using salt and charcoal / coke as required for pipe type 17.00 Nos. 171.70
Item Description of Item Quantity Unit Rate In Amount
249 Supplying & erecting earth pit of minimum bore dia.150mm 8.00 Nos. 4591.46
size approved make Earthing Electrode consisting Pipe-in-Pipe
Technology as per IS 3043-1987 made of corrosion free hot
dipped G.I.Pipes having Outer pipe dia of 50mm having 80-
200 Micron galvanising, Inner pipe dia of 25 mm having 200-
250 Micron galvanising, connection terminal dia of 12mm with
constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for following
type of applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test certificate
including value of earth resistance of installation duly stamped
and signed by agency and officer Incharge has to ensure the
value of earthing resistane mentioned in test Certificate) &
having back filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC
62561-2017, Voltage drop:- < 1 volt at no load & dry form,
Sulphar content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retain moisture for long time
Necessary test report must be submitted by Agency. For
Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of
250 Providing & erecting weather proof, dust & vermin proof, floor 6.00 Sq. Mtr. 10468.65
mounted front operated indoor type cubical panel board
necessary IP-42 and above protection as per approval from
engineer incharge made from 14 SWG thick CRC M.S. sheet for
outer body & doors, 16 SWG thick CRC M.S.sheet for internal
partitions with necessary accesories , supporting angles/ flats
channel including cutting, bending, drilling, welding, riveting
with internal partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of supplied
switch gears, BUSBARS, suitable size of inter connecting PVC
copper wire / copper-aluminium strips, rubber grommets, rib,
bakelite control fuses/MCB for measuring instruments, earth
bus & earth bolts, foundation flange - bolts-base Plates,
sufficient nos. of hinged doors, handles with locking
arrangement and rubber gasket,heavy duty end terminal
connection,danger notice board, necessary ventilation,
earthing strip complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of switch gears,
bus bars, inter connecting mains & Copper Aluminium strips,
meters, Fuses etc. The dimension shall be measured excluding
base beams) The panel shall be supplied with following
approved manufacturers with following size.locally fabricated
panel board with 350mm depth
251 Providing , erecting , fabricating the M.S. structure as per 80.00 Kg. 77.77
requirement on site incorporating proper size of M.S.
angles,square,round, flats, bars, channels, sections complete
with cutting, welding, grinding & finishing duly painted with
one coat of red oxide with erection on site as per direction of
engineer in charge with necessary grouting, cementing,
plastering & finishing complete.
252 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 40.00 Mtr. 92.92
cable Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size
of cables. 2 core 6 Sq. mm
Item Description of Item Quantity Unit Rate In Amount
253 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 28.00 Mtr. 490.86
cable multistrand Aluminium conductor for 1.1 KV. to be laid
on wall with necessary clamps or in existing trench / pipe of
following size of cables 3 1/2 core 95 Sq. mm ( 50 Sq. mm
254 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 235.00 Mtr. 540.35
cable multistrand Aluminium conductor for 1.1 KV. to be laid
on wall with necessary clamps or in existing trench / pipe of
following size of cables 3 1/2 core 120 Sq. mm ( 70 Sq. mm
255 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 1168.00 Mtr. 126.25
cable multistrand / Solid Aluminium conductor for 1.1 KV. to
be laid on wall with necessary clamps or in existing trench /
pipe of following size of cables4 core 6 Sq. mm
256 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 40.00 Mtr. 153.52
cable multistrand Aluminium conductor for 1.1 KV. to be laid
on wall with necessary clamps or in existing trench / pipe of
following size of cables 4 core 16 Sq. mm
257 Making trench in soft soil of suitable width of 90 cm deep for 982.00 Mtr. 55.55
laying cable or locating the fault all over the run and back
filling the same and making the surface as normal ground.
258 Supplying following size of Light duty “A” Class G.I . Pipe & 20.00 Mtr. 300.98
erecting as directed by Engineer-in-charge. 50 mm dia
259 Supplying following size of Light duty “A” Class G.I . Pipe & 14.00 Mtr. 696.90
erecting as directed by Engineer-in-charge. 100 mm dia.
260 Providing & laying approved make Double walled corrugated 842.00 Mtr. 62.62
pipes (DWC) of polyethylene(conforming to IS 14930 II )with
necessary connecting accessories of same material at required
depth in existing trench for laying of cable. below ground /
road surface for enclosing cable 50 mm outer dia
261 Providing & laying approved make Double walled corrugated 148.00 Mtr. 137.36
pipes (DWC) of polyethylene(conforming to IS 14930 II )with
necessary connecting accessories of same material at required
depth in existing trench for laying of cable. below ground /
road surface for enclosing cable120 mm outer dia.
262 Providing and, fixing heavy duty flange type brass cable gland 17.00 Nos. 38.38
with rubber ring for PVC insulated armoured cable complete
with out going tails, insulating tape etc for following size of
cables. 2 to 4 core 6 Sq. mm
263 Providing and, fixing heavy duty flange type brass double 4.00 Nos. 131.30
compression type cable gland with rubber ring for PVC
insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables. 3 & 1/2 core
Item Description of Item Quantity Unit Rate In Amount
264 Providing and, fixing heavy duty flange type brass double 8.00 Nos. 140.39
compression type cable gland with rubber ring for PVC
insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables 3 & 1/2 core
265 Solder less crimping type Aluminium lugs conforming to IS 4.00 Nos. 20.20
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.
266 Solder less crimping type Aluminium lugs conforming to IS 2.00 Nos. 25.25
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.
267 Solder less crimping type Aluminium lugs conforming to IS 18.00 Nos. 40.40
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.
268 Solder less crimping type Aluminium lugs conforming to IS 28.00 Nos. 45.45
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.
269 Providing & erecting Approved make Power Saving 50 Watt 383.00 Nos. 1948.29
Ceiling Fan with double ball bearing ISI mark with Condenser
230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades
with aluminium blades with , canopy & 30 cm. down rod
erected with earthing.(Make shall be approved by Engineer in
270 Supplying and erecting 19 / 20 mm. nominal bore Medium 383.00 Nos. 108.07
Class M.S. Pipe down rod erected duly painted for fan complete
with proper insulation without leakage and earthing.
271 Supplying & erecting fan hook box of 10 mm M.S. round bar 383.00 Nos. 108.07
bounded to the RCC bars up to 50mm length each side and
pierced through a 16 Gauge M.S. box / Heavy Duty PVC box
complete erected concealed in Ceiling with necessary finishing.
272 Providing 2.5mm.thick laminated acrylic sheet to cover the fan 383.00 Nos. 18.18
hook or Fan box.
273 Supplying & erecting approved make low noise decorative 3.00 Nos. 1366.53
exhaust fan having square frame ABS body with inbuilt lowers
& square frame. 250mm with 1350 RPM Cat.II
274 Supplying & erecting single phase approved make industrial 40.00 Nos. 2054.34
exhaust fan suitable for medium duty ring mounted low noise
operation suitable for medium duty having following dia size
and maximum speed in RPM 305 mm dia 900 RPM Cat.II
Item Description of Item Quantity Unit Rate In Amount
275 Supplying and erecting approved make Octagonal pole made 32.00 Nos. 8192.11
from HR sheet steel. The pole should be made as per IS. and
shall be coated with hot dip galvanizing as per IS
2629/2633/4759, suitable suspend local wind speed with
integral Junction box consist of terminal plate of min 6mm
Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB
Mounting, stud type terminal and arrangement for cable
termination to be erected With Suitable foundation (Included)
as per details given by manufacturer considering site
requirement. 6 Mtr. Long 70 mm Top X 135 mm bottom dia,
mm thickness with 200mmX200mmX12mm base plate, 4-M20
Bolts and 600mm long J-Bolt.Approx Pole weight 59 kg
276 Supplying & erecting approved make SMC press moulded 10.00 Nos. 515.10
composite FRP. loop-in, loop-out approx. 2mm thick box
complete with Bakelite connector strip 5way(3P+N+E),DIN rail
for mounting mob & hinged doors as per requirement having
locking arrangements with mounting clamp with nuts, bolts &
washers suitable for erection on pole with cable clamps& earth
bolt of following size of box.250mm x 200mm x 100mm [deep]
277 Supplying and erecting Street light pole bracket comprising 18.00 Nos. 491.87
main B Class GI pipe of 4.2 cm/require outside dia. complete
with suitable B Class G.I. sleeve tubing of approx. 45cms.length
and suitable for 76.5mm/80mm/require size of pole top
having nuts and bolts for fixing the brackets and having spread
of 0.5 mtr. Length with 110 deg.with vertical plane and suitable
welded stiffener reducer and nipple with check nut complete
painted with one coat.of Red oxide / PU base primer and two
coats of Aluminium / PU paint. paint with following nos of
arms. [A] Single Arm bracket 0.5 Mtr
278 Supplying and erecting Street light pole bracket comprising 14.00 Nos. 622.16
main B Class GI pipe of 4.2 cm/require outside dia. complete
with suitable B Class G.I. sleeve tubing of approx. 45cms.length
and suitable for 76.5mm/80mm/require size of pole top
having nuts and bolts for fixing the brackets and having spread
of 0.5 mtr. Length with 110 deg.with vertical plane and suitable
welded stiffener reducer and nipple with check nut complete
painted with one coat.of Red oxide / PU base primer and two
coats of Aluminium / PU paint. paint with following nos of
arms. Double Arm Bracket 0.5 Mtr
279 Supplying & erecting IP 55 grade following size section pillar 1.00 Nos. 3595.60
fabricated from joint less M.S. Sheet with angle iron legs made
from jointless M.S. Angle with cable clamps to be buried in
ground to have appropriate erection to work uniform until
erected with cement concrete foundation and 45 cm high
bricks work finishing with plaster etc. hinged double door
internally supported on both side, with internal and outside
looking arrangement with look and keys in duplicate 35 x 35 x
5 mm M.S. Angle of Two Nos. one is welded and other with nut
and bolt for erecting Bakelite sheet. Painting the Section Pillar
inside and out side with three tank powder coated paint.
section pillar roof should be without joint with water leakage
proof & tested as per IP 55 test & followed by IS 2147 of
75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS
Sheet with angle iron legs 45 cm long made from 35 X 35 X
mm thick MS angle.
Item Description of Item Quantity Unit Rate In Amount
280 Supplying and erecting HYLAM sheet on existing angle iron 1.00 Sq. Mtr. 1541.26
frame.for following thickness 8mm
281 Supplying and erecting nuwood 12 mm thick on existing angle 1.00 Sq. Mtr. 291.89
282 Providing and erecting Inverter based approved make split air- 16.00 Nos. 56353.96
conditioning unit consisting of condensing unit with variable
speed fan motor, inverter type hermetically sealed rotary
compressor with accessories etc. duly connected separately
erected evaporating unit and blower motor with its accessories
by means of extra supplied proper insulated copper
tubing,drain PVC pipes suitable for ( cost includes Eco Friendly
green gas charging and 15A plug top & Remote Control & MS
Stand) with necessary core cutting. (1) For ISEER Range
(KWH/KWH)(3.1 to 3.99) for 1.7 to 2 ton capacity - Premium
283 Supplying and erecting insulated pair of soft copper tubing 154.00 Rmt. 965.56
open or concealed including power and control
cable,necessary PVC drain pipes for Split AC machine up to
284 Supplying and erecting approved make Single phase power 16.00 Nos. 3232.00
conditioners suitable for input voltage 180V / 280V, output
voltage 220V (+ / - 10%) AC 50 ‘Hz with electronic relays &
component of housed in sheet metal cabinet ‘with epoxy
powder coated, with high - low cut-off, time delay, voltmeter,
selector switch, 5/15 A universal socket with range off 4 KVA
285 Providing & erecting water cooler having storage capacity 150 3.00 Nos. 55893.40
Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of
45˚ C. The outlet temp. of the water should drop by 15˚C within
a hour, The water cooler should be comprising of hermetically
sealed compressor, fan motor, condensing unit, water tank
surrounded by evaporating, coil, thermostats, relay
etc.complete with necessary inlet & outlet connection. The
body of water cooler will be made from Stainless Steel.
286 Supplying & erecting reverse osmosis (RO) water purification 3.00 Nos. 77891.20
system with M.S. powder coated pedestal frame, prefilter
housing carbon filter suitable buster DC pump, auto low & high
pressure switches with following size of LPH capacity &
erected as directed [D] 100 LPH with 1 phase / 3 phase Raw
water pump of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar
/CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron
cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH
@ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane
housing with RO membrane of 40*40 - (1No), RO pressure tube
4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with
Recovery Rate 50%.
287 Supplying and erecting approved make panel mounting type 4.00 Nos. 1275.63
Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts
range erected on existing panel board with all connection,
wiring etc .with manufacturers calibration certificate.
288 Supplying and erecting approved make panel mounting type 4.00 Nos. 1558.43
Digital Ammeter having 3 digits LED display, external CT
operated, calibrated for 0 to 1000 Amps suitable to operate on
500 Volt AC , erected on existing panel board with all
connection, wiring etc .with manufacturers calibration
Item Description of Item Quantity Unit Rate In Amount
289 Supplying and erecting Ammeter / Voltmeter selector switch 8.00 Nos. 317.14
for 3 phase AC Supply 500 V on existing panel board with
necessary connections.
290 Providing & erecting L.T. Current Transformer with bar 12.00 Nos. 274.72
primary 50/5 to 1000/5 ratio 15 VA burden erected in existing
CRCA box duly secured with insulating materials connected to
291 Supplying and erecting approved make suitable panel indicator 12.00 Nos. 43.43
LED type lamp, lens cover, complete erected with necessary
292 Supplying and erecting, commissioning and testing of Diesel 0.00 0.00 0.00
Generating set confirming to IS: 4722:1968 & BS:5514 having
continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply
comprising of a totally enclosed air/water cooled diesel engine
with multi-cylinders developing suitable BHP not less than
following capacity at 1500 RPM with 10% overload for one
hour in 24 hours with standard accessories like fly wheel,
lubricating oil cooler, "A" class governor, heavy duty fuel wheel
and lubricating oil filter, oil bath air filler, lubricating oil
pressure gauge, end exhaust manifold, standard set of tools
with adjustable spanners, screw drivers, cylinder head to
cover, joint cylinder head to exhaust, element lube oil filter,
/ 24 volts electric starting equipment complete with standard
heavy duty battery, dynamo, cut-outs, ammeter, necessary
wiring, pressure gauge, starter etc and heavy duty Residential
type exhaust silencer and vertical hot air duct both
293 logged with asbestos rope, save oil trays, exhaust piping of 0.00 0.00 0.00
required length, standard wall/floor mounted fuel with level
indicator and piping and drip proof alternator, self excited, self
regulated, screen protected, with excitation system, capable of
delivering the rated system output at 415 volts, 3 phase, 0.8 PF,
50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-
1968 with voltage regulation +/- 5% of rated voltage from
no load to full load. Both the engine and alternator fitted on a
common fabricated steel base plate with antivibration
mounting engine and alternator both connected to each
other by flexible flange coupling and with floor/wall mounted
control panel box comprising of voltmeter ammeter, selector
switches, ACB / MCCB / MCB of adequate capacity,
294 indicator lamps duly wired with HRC fuses. The alternator & 1.00 Nos. 1029194.04
control panel shall be connected with provided suitable
capacity armoured cable and complete with Acoustic enclosure
(canopy) made out of 16 SWG CRCA Sheet, sound absorbing
material Rockwool of 64 density & 100 mm thick conforming
to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin
bonded rockwool covered from inside the canopy by
perforated sheet with 3/4 mm holes, sound level not more
than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection,
commissioning and satisfactory testing as per requirement
with first filling of fuel, oil, etc. with guarantee / Warrantee of
complete system for Two years. & with obtaining all necessary
certificate from Electrical Inspector. The Capacity and Ratings
of DG sets are as below. Continuous rating of 125 KVA ,BHP not
less than 154 BHP
Item Description of Item Quantity Unit Rate In Amount
295 Supplying & erecting Amplifier having following specification: 1.00 Nos. 11298.87
Power Output :250W (RMS) (300W Max.)
inputs : 6 Misc. & 2 Aux.
frequency Response :50-1500HZ I3db
Tone Controls :Cut & Boost type
LED Meter :5 LED Arrays
The amplifier suitable to operate 240V A.C.& 24volt D.C.
(Battery) with automatic changeover from AC to Battery
operation, duly protected by wrong Battery Polarity
connections. [[Approved by Competent Authority i.e. not Below
the rank of Executive Engineer ]
296 Supplying & erecting Booster Amplifier having power output of 1.00 Nos. 9672.77
25OW (RMS,), suitable to obtain combined power output of
two, with 6 mike inputs & suitable to be used independently as
a 250watt amplifier in combination with mike & mixer. The
booster Amplifier shall be without mike &Aux. input channels,
The system shall be suitable to operate on 24OV. A.C. &
Volts D.C. Battery. [[Approved by Competent Authority i.e. not
Below the rank of Executive Engineer ]
297 Supplying & erecting recess wall mounting speaker with 5W 66.00 Nos. 591.86
rated input power 3.3 K. Ohms / 3W impedance, 100 -
Hz frequency response with 6 inch dia. cone type 8 ohms
speakers duly fitted in ABS plastic cabinet of colour match with
wall or ceiling of following size. [[Approved by Competent
Authority i.e. not Below the rank of Executive Engineer ]Square
shaped 260 x 260mm size speaker
298 Supplying microphones stands with sturdy mechanism, treble 2.00 Nos. 445.41
free movement & positioning of microphones, free from rust
with superior quality of chrome plating with following size.
[[Approved by Competent Authority i.e. not Below the rank of
Executive Engineer ]Fixed height 91 cms. & extendable up to
62 cms. with round base of dia. 23 cms.
299 Supplying, installing and testing approved make microphone 2.00 Nos. 1284.72
for All purpose, with frequency response of 100 - 11000 Hz,
having sensitivity 2.2mv / Pa & impedance 500 Ohms (LO- Z)
supplied with quick detachable holder, 6 mtr twin core cable &
3 pin XLR connector. [[Approved by Competent Authority i.e.
not Below the rank of Executive Engineer ]
Item Description of Item Quantity Unit Rate In Amount
[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting
torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous
motor of proper rating with high efficiency shall be used.[2]
Micro processor based / PLC, ACVVVF, vector control drive
with encoder feedback closed loop system shall be used for lift
car and door operation which shall be full collective selective
operation hall call demand response, UP/DOWN hall stops,
Main, Up/ Down Contactor with overload and phase reversal
relay and safety controls. [3] Car with M S platform with
bracings of adequate size and to sustain the impact load cabin
+ passenger with safety factor of fire for steel and side panels
of Stainless steel of sheet of grade 304 duty. Car ceiling will be
S.S. finishes with aesthetic appearance with LED ceiling lights.
Car flooring shall be of s/s 304 chaker plate design sugeested
of engineer in charge. of engineer in charge. Car doors shall be
of stainless steel grade 304, hairline finish with centre opening
/ telescopic automatic doors. Car panel will also be S.S.
finished with emergency stop device, mechanical door safety
device, facility of auto/ attended mode. All car panel buttons
and all floor switches must be with brail language as per lift
act. All landing doors must be fire rated for 2 hour shall be
fully automatic centre opening/ telescopic opening made of
hairline finish steel grade of 304 with key holes and infrared
curtains with Unlocking facility from outside [5] Appropriate
battery operated emergency light in the car along with alarm
switch shall be provided. Also, Emergency Light & Fan should
start immediately without any Time Delay as soon as power
[6] Digital scrolling indicator system for up-down arrow along
with floor position indicator shall be provided inside the car
[7] Full height infra red curtain with multiple cross / crossing
light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be provided
accordingly of passenger capacity with Manual Rescue
Operation ( Manual Cranking Facility).
[9] Audio visual indication in the lift car showing over loading
shall be provided such that doors kept open till excess load is
removed. [10] Spring buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with automatic sleep
timer shall be provided.
[12] Voice annunciator with suitable music shall be provided in
[13] Self diagnostics system for operational and safety
parameters shall be provided in control panel.
[14] Mechanical over speed governor with governor
calibration as per actual site parameters and submission of
calibration certificate submission, door key holes in the floor
doors, fireman switch shall be provided.
[15] Lift machine hoisting arrangement in the lift machine
room and monkey ladder for lift pit should be provided by the
lift agency, along with the other steel structure works,
foundations for the machine etc…
[16] In the hoist way fascia plate shall be provided without any
extra cost, where ever required as / if directed by engineer in
Item Description of Item Quantity Unit Rate In Amount
[17] Permanent wiring with necessary safety devices like RCCB
in all circuit, Over Voltage Under Voltage protection and THD
eliminator in circuit for lift machine room and lift well with
proper numbers of light points, with fixtures, exhaust fan and
plug points shall be provided by the agency. Only 3 phase
Power Supply shall be made available by department in lift
machine room. Necessary Earthing as per Lift Act/Rules shall
be arranged by Lift Agency.
[18] Any civil/ electrical works for additional and alteration in
lift shaft and machine room related to erection of lift shall be
made by lift agency without any extra cost. (granite/marble
fixing around all landing door openings are not in lift agency’s
[19] Agency has to provide all working drawings and
documents and liaison services for obtaining all necessary
permission from lift inspector and other authorities. [20]
acrylic transparent licence/display A4 size holder in lift car
[20A] As per statutory requirement of Govt. Of Gujarat lift &
escalator act 2000, lift agency has to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor.
4.carrying out third party lift inspection during/after lift
erection and provide report by third party authorized by
concern licensing authority 5.agency has to provide third
party insurance upto completion of free maintenance period
and submit the document for the same.
[21] Car Panel Operating Buttons with floor position
indicator/buttons must be of Auto Glow type clearly visible
when view from inside cabin.
[22] For Physically Handicapped person Full Length Handrails
of hairline finish steel grade of 304 should be provided at
appropriate height on the Rear & Side Wall Panels in Lift Car.
[23] With Necessary KVA rating voltage controlled Stabilizer
suitable for your controller, drive and all equipments of lift.
[24] Necessary rating of DP Elcb and FP Elcb required for lift is
in scope of work which rating is sugested by CEICED
Department (electrical Inspector)
(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM
category 1. Advanced control system dual 64 bit embedded
microprocessor with CANBUS Serial Communication mode
including Regenerative power efficient operation,on site
programming facility, Anti nuisance, Pte-opening, BMS/RMS
with necessary online real time monitoring system having
necessary connectivity for remote monitoring & other suitable
supporting hardware & software devices to fulfil the purpose.
2. Floor Indication LCD Display with call registration & brail
mark with arrival gong and hall lantern & TFT Screen in the car
with MP3 Voice Announcer. 3. CAR Panel should be Scratch
resistive SS Moonrock finish / Hair Line / Honeycomb for car
and all Doors, All landing doors must have fire rating up to
hours and car door must have multi-level crisscross beam door
protection. 4. To & fro communication system & wiring (i.e. car,
control room & guard room) and Each elevator are equipped
with remote monitoring system.agency has to provide mobile
app and user id and password for monitoring
300 13 Passengers,. Ground plus 2 upper floors with Rated Speed 1.00 Nos. 1701663.15
of 1.0 m/sec., With General PLUS ADDITIONAL SPECIAL
FEATURES attached herewith. Prem. Cat.
Item Description of Item Quantity Unit Rate In Amount
Supply, Installation, Testing & Commissioning of following size
of Grid Tied Solar Power Plant with Solar Panels (ALMM
approved): Frame Material : Anodized Aluminum alloy Frame
With Twin Wall Profile, Front Cover : High Transmission Low-
Iron Tempered Glass (AR Coated), High efficency and positive
power tolerance Pmax: 0/+5, Module Efficiency should be
approx. 19.5%-22%, Normal operating temperature 45'C,
Junction Box with Waterproof IP67 & MC4 Compatible and
Enclosed with Bypass diodes, 100% Electroluminescence test
to ensure error free Modules, Thep. temp. co-efficient of the PV
module shall equal or better than -0.45%/degree C. Solar PV
modules of minimum fill factor 75% to be used. Unit
Production:- More than 4.5 Unit /kw /day (Actual) (1Year Avg)
with 10 year Product warranty and 25 year Linear Power
Warranty includes all mechanical and electrical parameters of
the Solar panel. Modules must be complied to the DCR
(Domestic content requirements). The Ration of AC to DC is 5:6
for the Installation capacity which are given in AC KW.
Solar Inverter: MPPT Range: MPPT Range: 80-1000 V, Max
efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating
Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%,
Operating Tempreture Range : -25~60°C, Integrated
protection of Inverter are Anti-islanding Protection, Input
Reverse Polarity Protection, Insulation Resistor Detection,
Ground fault protection, Residual Current Monitoring Unit,
Output Over Current Protection, Output Short Circuit
Protection, Output Over Voltage Protection, PV array string
fault Protection. Protection Degree: IP65, User Interface LCD &
APP, Datalogger & Communication: GPRS / Wi-Fi.
Integrated, Input Reverse Polarity Protection Integrated,
Insulation Resistor Detection Integrated, Residual Current
Monitoring Unit Integrated, Output Over Current Protection
Integrated, Output Short Circuit Protection Integrated, Output
Over Voltage Protection Integrated, Protection Degree: IP65,
User Interface LCD & APP,Datalogger & Communication: GPRS
/ Wi-Fi, Module Mounting Structure: The mounting
(Rectangular pipe / square pipe / circular pipe) with requisite
cross bars, nuts and bolts, etc. shall be Hot deep galvanized
with minimum 80micron coating. The Rectangular / square
/circular hollow pipe section used for the structure should
have a minimum thickness of 2.0 mm. other than above, the
material thickness should be minimum 2.5 mm. A certificate of
a structural engineer certifying the strength and stability of the
mounting structure to withstand the weight and wind speed of
150 km/hour throughout the life span of 25 years of the
system, shall be submitted by the vendors. Hot Dipped
Galvanized steel coils. suitable arrangement for base plate for
foundation , solar panel mounting, the structure should be
suitable for carry the load of solar panel,wiring, sprinkler
system etc. with necessary foundation work/wall mount, j bolt,
anchor fastner etc. the nut bolt used for installtion of stucture
should be (SS 304) quality.The ground clearance of the bottom
most edge of solar panel shall not be less than 300 mm to
mm or as per site’s technical/feasibility requirement. a.
Column –The minimum section (thickness) should be
60MM*40MM b. Rafter - The minimum section (thickness)
should be 60MM*40MM c. Purlin - The minimum section
(thickness) should be 40MM * 40MM Balane of System with
necessary Swichgears (Suitabel size and protection of ACDB &
Item Description of Item Quantity Unit Rate In Amount
301 (Excluding GEDA Application fees, Solar connectivity Charges, 75.00 PER 40658.56
Meter connectivity Charges, Meter testing Charges.) Grid Tied KW
Solar Power System: 51 - 100 kW (3 - phase)
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words)
of the estimated rate mentioned above. Amount of my /our
Tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
1 Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017
Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change
4 as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original
item at the rate of input rate mentioned in all the tender.
The Contractor will have to submit the all required mix design at his own cost before execution as directed and to be
5 approved from the Engineer in charge.
Deputy Executive Engineer Executive Engineer
(R&B) Sub-Division (R & B) Division
Chhotaudepur Chhotaudepur
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD - Science College Dumali.pdf
BOQ - Science College Dumali.pdf
Technical Specifications.pdf
Building-Specification Booklet.pdf
Memorandum of Understanding.pdf
AMC Lift Condition.pdf
15 year lift amc GR.pdf
Lift-contract on stamp.pdf
GRs.pdf
GR - Performance Bond and Bitumen date.pdf
P.Q. - Science College Dumali.pdf
Download all tender documents and submit your bid