CPPP

To Be Opened

Works

Civil Works

CMF (Civil work maintenance) of Sector-28, Rohini flats HS-2010.

Delhi Development Authority

Rohini | North West Delhi, Delhi

Amount: ₹7.8 CrCloses: 18 May 202613 May 2026Closed

Timeline

Published22 Apr 2026
Closed18 May 202613 May 2026
Bid Opening18 May 202613 May 2026

Corrigenda

Corrigendum

2 updatesLatest on 13 May 2026Submission Ends:13 May 202618 May 2026

Date changes

Download Ends13 May 202618 May 2026Submission Ends13 May 202618 May 2026Bid Opening13 May 202618 May 2026

Tender Value

₹7.8 Cr

EMD Value

₹15.6 L

Closing Date

18 May 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

EE,RMD-1,DDA

Address

EE,RMD-1,DDA

Work Description

Removal of washed stone grit plaster and plastering, painting of common area, Pkt. GH-IV, Sector-28, Rohini.

Tender Information

Tender ID

2026_DDA_906173_1

Reference Number

02/EE/RMD-1/DDA/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

300 days

Location

Rohini

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

16 documents required · 16 mandatory

Fee/PreQual/Technical

Requiredi. Scanned copy of valid enlistment order from concerned department/ Proof of registration in Contra (.pdf)

Requiredii. Scanned copy of proof of depositing applicable E-Tender processing fee to CRB/DDA as per NIT (.pdf)

Requirediii. Scanned copy of Unique transaction reference of RTGS/NEFT of Earnest Money Rs.15,63,218.00/- (.pdf)

Requirediv. Scanned copy of Details of works in Form-C in this NIT whose Certificates as per NIT (.pdf)

Requiredv. Scanned copy of Certificate of Work Experience as per FORM-D and eligibility criteria specifie (.pdf)

Requiredvi. Scanned copy of PAN Card of the Agency/Bidder. (.pdf)

Requiredvii. Certificate of Registration for GST and acknowledgement of up to date filed return as per NIT (.pdf)

Requiredviii. Scanned copy of Tender Acceptance Letter as per format given in this NIT as per NIT (.pdf)

Requiredix. Copy of certificate of registration with EPFO and ESIC. (.pdf)

Requiredx. Scanned copy of Affidavit/undertaking on duly notarized non-judicial stamp paper as per NIT (.pdf)

Requiredxi. Scanned copy of Affidavit/undertaking (Not older than 30 days from the last date as per NIT (.pdf)

RequiredxiiThe following documents should be merged and uploaded as in case of partnership as per NIT (.pdf)

Requiredxiii. Any other Documents as specified in the NIT. (If any) (.pdf)

RequiredxivBank Accounts details of agency or Scanned Copy of Cancelled Cheque with Bank Name as per NIT (.pdf)

Requiredxv. Email ID, contact number(s) and Mailing address (for all correspondence.) (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹15.6 L

Important Dates

Last Activity

22 Apr 2026

Published

22 Apr 2026

Bid Opening

18 May 2026

Download Starts

22 Apr 2026

Download Ends

18 May 2026

Submission Starts

22 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (4 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Part-A Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
2Removal of Washed stone grit plaster on exterior walls For all thickness including disposal of material within 50 metres lead as per direction of Engineer- in-charge.
3Carriage of C&D waste received from site to Rani Khera C&D waste plant i/c segregation loading, unloading for all leads and lifts etc. all complete as per direction of Engineer-in-charge. All the charges applicable for C&D waste plant shall be borne by the agency and nothing extra shall be payable from this item.
415 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
5Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
612 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
7Finishing walls with textured exterior paint of required shade : a) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Note:- Rate of item is for all heights and nothing extra shall be payble on this account.
8Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
9Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment).
10Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.52 MB

Work Item Documents

BOQ_952480.xls

BOQ • 0.32 MB

NIT02.pdf

Tender Documents • 26.62 MB

Corrigendum Documents

BOQ_952480.rar

PDF • 0.08 MB

Notice.pdf

PDF • 0.24 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Part-A Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
2Removal of Washed stone grit plaster on exterior walls For all thickness including disposal of material within 50 metres lead as per direction of Engineer- in-charge.
3Carriage of C&D waste received from site to Rani Khera C&D waste plant i/c segregation loading, unloading for all leads and lifts etc. all complete as per direction of Engineer-in-charge. All the charges applicable for C&D waste plant shall be borne by the agency and nothing extra shall be payable from this item.
415 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
5Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
612 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
7Finishing walls with textured exterior paint of required shade : a) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Note:- Rate of item is for all heights and nothing extra shall be payble on this account.
8Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
9Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment).
10Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Part-A Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

2Removal of Washed stone grit plaster on exterior walls For all thickness including disposal of material within 50 metres lead as per direction of Engineer- in-charge.

3Carriage of C&D waste received from site to Rani Khera C&D waste plant i/c segregation loading, unloading for all leads and lifts etc. all complete as per direction of Engineer-in-charge. All the charges applicable for C&D waste plant shall be borne by the agency and nothing extra shall be payable from this item.

415 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

5Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

612 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

7Finishing walls with textured exterior paint of required shade : a) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Note:- Rate of item is for all heights and nothing extra shall be payble on this account.

8Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

9Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment).

10Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.