Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 LAccepted-AOC | L1 | Accepted-AOC Due to lowest | |
| 2 | L2₹14.8 L+₹16,170 (1.11%)Rejected-Finance | L2 | Rejected-Finance Due to other than lowest | |
| 3 | L3₹15.0 L+₹34,734 (2.38%)Rejected-Finance | L3 | Rejected-Finance Due to other than lowest | |
| 4 | L4₹15.7 L+₹1.1 L (7.70%)Rejected-Finance 45 PIR BABA TARUSHAW ROAD HALWARA AD LUDHIANA 141106 | HALWARA | LUDHIANA | PUNJAB | 141106 | L4 | Rejected-Finance Due to other than lowest | |
| 5 | L5₹15.9 L+₹1.2 L (8.55%)Rejected-Finance H NO 963 10 STREET NO 5 DEEP NAGAR CIVIL LINES LUDHIANA 141001 PUNJAB | LUDHIANA | LUDHIANA | PUNJAB | 141001 | L5 | Rejected-Finance Due to other than lowest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
8 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana-141001
COMPREHENSIVE MAINT (DAY TO DAY COMPLAINTS) AT DHOLEWAL MIL COMPLEX UNDER AGE B/R LUDHIANA GE LUDHIANA
2023_MES_588998_1
GE/LDH-05/2023-24
Open Tender
Civil Works
Item Rate
270 days
Dholewal Cantt
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹30,000
Yes
15 May 2023
11 Apr 2023
9 May 2023
11 Apr 2023
8 May 2023
25 Apr 2023
11 Apr 2023 - 24 Apr 2023
Amount
S& F in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or glavanized wire staples, beads or in steel windows complete all as specified and directed.
S&F in repairs MS double action spring hinges 150mm with steel wire spring, stove enamelled complete fixing with screw to wooden frames or with welding to iron frames etc complete all as specified and directed.
S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F in repairs mild steel sliding door bolts stove enamelled black with bright bolts not less than 12mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolts 250mm complete all as specified and directed.
S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 250mm complete all as specified and directed.
S&F in repairs Aluminium anodised,barrel tower bolts of extruded section and fixed 200 mm long etc complete all as specified and directed.
S&F in repairs Aluminium anodised,barrel tower bolts of extruded section and fixed 150 mm long etc complete all as specified and directed.
S&F in repairs Aluminium handles, cast type, anodised 150mm long completed all as specified and directed.
S & F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, dooms etc.complete all as specified and directed.
S & F in repair Harrison rails, anodised aluminium alloy 20mm dia with fixing brackets,stops, rollers, dooms etc.complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and directed.
S&F in repair mild steel window handles,left and right, with small fittings suitable for steel window complete all as specified and directed.
S&F in repair mild steel window stay 300mm etc with small fittings suitable for steel window complete all as specified and directed.
M&L for running welding in repairs not exc 6mm thickness of metal to be welded complete all as specified and directed.
Taking down shutter of any description not exceeding 1.0 Sqm and refixing the same opeing after resecuring or easing and adjusting etc complete all as specified and directed.
All as per item No 16 above but exceeding 1.0 Sqm but not exceeding 2.0 Sqm each.complete all as specified and directed.
S&F in repair, mild steel, cold rolled, medium weight butt hinges 100 mm, fixed with screws to wooden frames or fixed with welding to iron frames complete all as specified and directed.
S & F in repairs AC ceiling decorative boards 4mm thicks fixed to timber frame works with screws etc complete all as specified and directed. Make: Everest/Upal/Charminar or equivalent approved by Engineer-in-Charge.
S & F in repairs Non asbestos fibre cement building boards(E board) 4mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat etc complete all as specified and directed. Make: Everest/Upal/Charminar or equivalent approved by Engineer-in-Charge.
S&F in repair Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed by Engineer-in-Charge.
S&F in repairs door closer cast copper iron body hydraulically regulated designation No. 2 universal type, suitable for door shutters of 36 to 60 Kg (Cast iron body) etc complete all as specified and directed.
S&F in repair floor door stopper over all length of cover plate 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floors etc complete all as specified and directed
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all asspecified and directed.
Pieces, small let in for making good where hinges, etc. Have been removed from chowkhats or frames, joinery, etc.including painting or oiling to match, if required
Taking down existing Aluminum door shutter and adjusting the floor spring/ Hydroulic door closer, locking devices, towerbolts and oiling the components and refixing the same on same opening and making smooth function of the door etc complete all as specified and directed.
Taking down rolling shutter of size exceeding 10 Sqm each from any position, any location including fittings and fixtures. Repairing/Replacing of unserviceable components and re-fixing on same opening in its original position after complete overhauling, greasing and oiling for smooth function etc complete all as specified and directed.
Taking down existing AC/PVC pipe and S&F PVC (SWR) pipe/ (rain water pipes) single socketed with rubber ring joints 110mm bore fixed to walls etc complete all as specified and directed
S&F in repairs 15 mm bore tubes medium grade galvanized with all fittings in short lengths, fixed to walls or laying in floors etc complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 20 mm bore tubes medium grade galvanized with all fittings in short lengths, fixed to walls or laying in floors etc complete all as specified and directed by Engineer-in-Charge.
Disconnecting existing water tanks, for repairs, cleaning and removing all scale and dirt etc from tanks, and from mouth of circulating pipes etc and reconnecting in same position, of capacity exc 250 ltrs and not exc 500 ltrs each including setdown the date of cleaning as date-month-year format on tank with enamel paint etc complete all as specified and directed .
All as per item No 31 above but capacity of tank exceeding 500 ltrs but not exceeding 1000 ltrs each
S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixedwith long body.(Minimum weight 15mm-120gms)etc complete all as specified and directed.
S&F in repair Pillar taps fancy type of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120 gms etc all as specified and directed by Engineer-in-Charge.
S&F in repair stop valves / angle valve 15mm bore , cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.
S&F in repair stop valves 20 mm bore , cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.
S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed.
S & F in repairs ball valves high pressure of PTMT with epoxy coated aluminum rod and high- density plastic ball screwed for iron pipe dixed 20mm dia minium weight 210 gms etc complete all as specified and directed. Make : Prayag or Equivalent approved by Engr-in-Charge.
All as per item No 38 but 15mm dia minum weight 142 gms
S & F in repairs waste coupling PTMT 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed
All as per item No 40 Above but 40mm dia suitable for steel sink.
S&F in repair 32mm dia PTMT 610mm long waste pipe suitable for WHB or Sinks etc complete all as specified and directed Make Polyplast/Prayag or equivalent approved by Engineer-in-Charge
S&F in repair 40mm dia PTMT 610mm long waste pipe suitable for WHB or Sinks etc complete all as specified and directed Make Polyplast/Prayag or equivalent approved by Engineer-in-Charge
S & F in repairs grating round 150mm dia PTMT minimum weight 50 gms fixed to Floor trap/Nahni trap with CM 1:6 etc complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as specified and directed by Engineer-in-Charge.
S&F in repair super flush siphon for low level single or double action flushing cistern complete set (excluding float valve PVC handle) all as specificed and directed.
Petty repairs to leakage of bib taps, pillar cock stopcock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by changing the Spindal/PVC washers/Sheet washers or any other minor accessories etc complete all as specified and directed.
Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush all as directed.
S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making good to flooretc complete all as specified and as directed (Make : Hinduware/Cera or equvalent approved by Engineerin-Charge.
S&F in repair plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.
S&F in repair CP brass shower rose with or without swivel joints 100mm size including fixing to steel pipe or union complete.
S&F in repairs covers for PVC tanks any make for capacity 500/1000 Ltrs fixed with screws complete all as specified.
S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foor rest etc complete all as specified and directed. Make: Hinduware/Cera/Nycer/parryware or equivalent approved by Engineer-in-Charge.
S&F in repairs stainless steel sink 1mm thick for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm complete.
S&F in repair stainless steel sinks with draining board made of 1mm thick sheet with over all size 915mm x 460mm and bowl size 410mmx330x160mm for kitchen or laboratory with pluge washers and waste, including bedding in cement mortar on to dwarf walls or including fixing centilever bracket and connecting uinon to waste pipe. Make Nirali/Diamond/Cobra or equivalent approved by Engineer-in-Charge.
S&F in repair vitreous china wash hand basin white flat, backof size 580mm x 450mm including 32mm waste coupling and PVC waste down pipe complete all as specified and directed by Engineer-in-Charge
S&F in repair small GI fittings 15mm, such as socket, tee, elbow, reducer 20 x 15, reducer 20 x 25 tee of unequal size etc as required at site complete all as directed (Unit for this item shall be one No for each one item).
S & F in repair Tubular towel rail Brass chromium plated, 20mm dia, D type, 60cm long between flanges all as specified and directed.
S & F in repairs Vitreous china bowl urinal flat back size 465x355x265mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern) but including urinal pipe etc complete all as specified and directed Make : Hindustan/Nycer/parryware/Cera or equivalent as approved by Enginner-in-Charge.
Renewing glazed or ceramic tiles in patches area not exceeding 5 Sqm including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.
S & F in repairs Chromium plated health faucet (hand spray) with 1mtr long PVC flexiable pipe 15mm bore and fixed to in position etc complete all as specified and directed.
Taking down cement or cement lime plaster etc from wall/ceiling including racking out joints hacking for key, scrubbing down with water and M&L 15mm thick plastering in CM 1:4 on any surface of brick or concrete surfaces in patch exc 0.50 Sqm and n exc 3.00 Sqm each patch and apply two coats of white wash etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for Glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set in such as skirting/dado and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick cement plaster in cm (1:4) complete all as specified.
M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm, in floors etc. Set over and including 15 mm thick screed bed in cm (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified.
M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc. Set over and including 15 mm thick screed bed in cm (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified.
Dismantling plain or corrugated steel sheeting of any guage, thickness, including Nainital or similar pattern roof covering etc complete all as specified and directed.
S&F for plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) 0.63mm thick with grade of zinc coating 275 etc complete all as specified and directed.
S&F for galvanised corrugated mild steel sheeting 0.63mm thick with zinc coating grade 275, 2 corrugation side lap fixed with L or J type hooks or cranked hook bolts in roof and wall etc all as specified and directed.
Cutting of existing kota stone/marble/terrazo flooring with zero size mechanical powered cutting machine, cleaned thoroughly and finished with wax polishing complete all as specified and directed.
S&F in repair pillar tap, cast copper alloy chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipeetc all as specified and directed by Engineer-in-Charge.
S&F in repair legs of wall / wash basin mixer cast copper alloy chromium plated fly nuts screwed for iron pipe and fixed to 15mm bore of pipe etc all as specified and directed by Engineer-in-Charge.
Taking down existing PVC Door from chowkhats for carrying out petty repairs (like re-assembling of builders hardwares,re-alignment ,closing of small gaps/cracks etc),area of shutters n.exc 1.50 sqm each all as specified and directed by Engr-in-charge.
M&L for endora tiles 30cm x30cm x 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 specified and directed by Engr-in-charge
M&L for securing glass of any description in existing in metal frames glazed with putty including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)
S&F in repairs bib taps fancy type chromium plated with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule.
M&L for glazed ceramic coloured/ printed tiles 450mm x 300mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.
M&L for vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 20mm thick screed bed of cm 1:6 .
All as item No 79 above but as in skirting over rendering 10mm thick in cement mortar 1:4.
Dismantling Asbestos cement corrugated sheet in roof covering all as specified.
S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F for 6mm thick asbestos cement, corrugated or semi-corrugated sheet in roofs, walls etc, fixed with L-type or J-type hucks bolts
All as per item No 84 but except sheets
S&F for AC ridge, two pieces adjustable fixed with L type or J type hooks.
All as per itme No 86 except accessory (using old AC Ridges)
S&F in repair mild steel work confirming to Fe 290 grade-E -165 as in wind ties in roof covering.
S&F in repairs 5.5mm thick looking mirror including frame of size 1200x600 mm
S&F in repairs vitreous China Urinal, half stall type, white with 32mm bore PVC waste pipe of length 900mm to 1200mm and including urinal spreader of PTMT any colour for fixing with 15mm dia pipe including connection to flushing pipe and outgoing pipes with 32mm bore PVC waste pipe of length 900mm to 1200mm.
M&L for Dholpur stone as on wall clading with machine cut face work, pillars, arches, haxogonal roof pillar and all facing etc of 15 to 18mm thick one side single length laid and jointed in cement and sand mortar 1:2 ncluding araldite chemical and recess pointed with an admixture of white cement and dholpur stone dust 1:1 and making edges, work in small patches, stone shall be of uniform colour of each stone and size not exceeding .25 Sqm each fixed, over & including 10mm thick cement plaster in CM (1:4) on brick or concrete wall surfaces finished rough surfaces to reveive tiles after dismantling of existing broken syones all as specified and directed.
Refixing of dholpur stone after dismantling of existing loose stones as on wall clading with machine cut face work, pillars, arches, haxogonal roof pillar and all facing etc of 15 to 18 mm thick one side single length laid and jointed in cement and sand mortar 1:2 including ardelite chemical and recess pointing pointed with an admixture of white cement and dholpur atone dust 1:1 and making edges, work in small patches, stone shall be uniform colour of each stone and size not exceeding 0.20Sqm each fixed, over & including 10mm thick cement plaster in CM (1:4) on brick or concrete wall surfaces finished rough surfaces to reveive tiles all as specified and directed.
Dismantaling water storage tank of Capacity exc 250 ltrs but n.exc. 500 ltrs
All as per item No 93 but capacity exc. 500 ltrs but n.exc. 1000 ltrs
S&F for rotational moulded polythylene water strarge tanks 1000 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1
S&F for rotational moulded polythylene water storarge tanks 500 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1
S&F in repair for glazed and skelten door,door seal at bottom with alliminium top and fiber brush at bottom to stop germs,mosquito,snak from out side at out side door complete all as specified and directed by Engineer-in-Charge.
S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repair CP jet spray suitable for europian western commode (EWC) including PVC connection 15mm size with PTMT nuts and washer of lenghth 900mm
JAY ANN CONSTRUCTION COMPANY
PARDEEP CONSTRUCTION COMPANY
CHOUDHARY ENTERPRISES
ANUJ ABROL CONTRACTOR
AGNIHOTRI CONSTRUCTIONS
M/s R.N Construction Co.
PK ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .