Constructing Of New Forester Quarter Gandhari , At.-Zamzar,Range-Virpur, Division-S.F.Godhara.

Division-S.F.Godhara.

Qty. Unit. Description. Rate. Per. Amount.

Excavation for foundation in hard soil upto 1.50 mt.

depth including sorting out and stacking of useful

materials and disposing of the excavated stuff upto

mt lead (C) Hard Murrum.

(SORP.No./71,I.No./04B001C/0)

Providing and laying cement conrete 1:3:6 (1 Cement :

3 coarse sand : 6 hand broken stone aggre gate 20 mm

9.12 Cu.m nominal sizes) and curing complete excluding cost of 2951.39 Cu.m

for work and reinforcement for reinforced concrete

work in (A)foundation and plinth.

(SORP.No/73,I.No/05003A.5.3.2)

Item No.3. Providing and laying ordinary

cementconcrete 1:2:4 (1-Cement 2- coarse sand : 4-

graded stone aggre gates 20 mm nominal size)and

finishing smooth with,curing etc. complete including

16.29 Cu.m the cost of form work but excluding the cost of rein 11614.35 Cu.m

forcement for R.C.C work in (B)COLUMNS: (i)Having

cross-sectional area 0.05 to 0.08 Sq.M.

(SORP.No./80,I.No./05031B1/0.00)

Item No.4. Providing and laying ordinary

cementconcrete 1:2:4 (1-Cement 2- coarse sand : 4-

graded stone aggregates 20mm nominal size) and

finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of

reinforcement for R.C.C work in(A) BEAMS :(i) Having

cross-sectional area 0.05 to0.08 Sq.M.

(SORP.No./79,INo./05031A1/0)

Brick Work using common burnt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm.in

foundation and plinth in Cement Mortar1:5 (1Cement:5-

Fine sand )(A)Modular.

Filling in foundation and plinth with murrum or

54.24 Cu.m selected soil in layers of 20cm. thickness including 279.95 Cu.m

watering, ramming and consolidating etc. complete.

Providing and laying controlled cement concrete M.150

and expo sed work with curing etc.complete incuding

14.77 Cu.m the cost of fromwork but excluding the cost of 9555.14 Cu.m

reinforement for R.C.C work in (i) Slabs upto 8cm

Providing and laying cement concrete 1:3:6 (1-Cement

: 3- Coarse sand : 6- Graded brick bat aggregate 40mm

normal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth.

Providing TMT Bar FE 415 reinforcement for

3602.48 Kg R.C.C.work including bending, binding and placing in 66.59 Kg

position complete upto floor two level.

Item No.10. Providing and laying coloured glazed tiles of

the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x

8 mm in skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry.

Providing and laying Vitrified tiles 8 mm to 10 mm

thick 24" x 24" in flooring treads of steps and landing

68.01 Sqm laid on a bed of 12 mm thick cement mortar1:3 ( 1 1383.99 Sqm

cement : 3 coarse sand) finishing pointing in white

Providing and laying Vitrified tiles 8 to 10 mm thick in

7.53 Sqm skrting risers of steps and dedo on 10mm thick cement 1523.61 Sqm

plaster 1:3 and jointed with white cement slurry.

Providing and laying polished kota stone slab 25mm

thick in risers of steps ,skiting Dedo and pillars laid on

8.27 Sqm 10mm thick cement mortar 1:3 and jointed with gray 1110.38 Sqm

cement slury mixed with pigment to match the shade of

slab including rubbing and polishing etc.complete.

Providing and Fixing Machine cut, free edges, machine

polished Granite stone slab 18 mm thick (single piece

not more than 150 cm ) for kitchen platform cladding

as per design including full molded round front edge

5.87 Sqm 6000 Sqm

and 1 cm nosing and laid on 20 mm thick cement

mortar 1:6 ( 1 cement:6 coarse sand) jointed with grey

cement slurry including rubbing and polishing finishing

Item No.15.Providing and fixing door Single shutter

factory made 35 mm.thick Solid Core wooden flush door

shutter confirming to TS. 2202 & ISI Approved manu

faccures covered with 1mm thick lamination on each side

of sutter, 6mm thick polished teak wood beading on

7.20 Smt peryohary with 6 Lever Mortice lock , SS Aldrop 30cm 4624.00 Smt

long, SS Handle size 15 Cm Long, Tower Bolt size 20 cm &

fixed with 4Nos. 150mm high S.S. hinges etc. as per detail

approved by this office including necessary fixtures and

Providing and fixing M.S. Grill of required pattern is

wooden frames of window etc. with M.S. Flats at

required with round handed bolts and Nuts or by

screws (A) Plain Grill.

Providing and fixing Window having extruded

13.36 Sqm aluminum clour anodized section farm outer etc.comp 2119.14 Sqm

Providing 20mm thick cement plaster in single coat on

single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i)

Cement mortar 1:3(1-cement:3-sand)+ Extra over

items 58 to 64 for finishing with af loating coat of neat

cement slurry(P/136,I/17003A.17.61 +

Providing and fixing concealed center point wall

ceilling & floor (PVC (SDR 13.50) Pipe heving national

40.00 Rmt 165.21 Rmt

sanitation foundation seal for potable water com. ©

Providing and fixing concealed center point to wall

ceilling & floor (PVC ( SDR 13.50) Pipe heving national

sanitation foundation seal for potable water of

50.00 Rmt 247.25 Rmt

following dia nominal bore tube fitting and clamps

including making good the wall ceilling and floor etc.

complete. (C) 25 mm dia.

Providing laying and joiting in true line and level

40.00 Rmt 110dia U.P.V.C (Type -B) conforming to IS 13592-1992 826.88 Rmt

with rubber ring & fittings comp.

Providing and fixing cast iron(spum) Nahni trap of the

following nominal diameter of self cleaning design with

5.00 Each C.I. scraws down of hinged grating including coat of 609.53 Each

cutting and making good the walls and floors 100 mm

inlet and 50 mm outlet (c) mm dia.

Providing and fixing C.P.brass shower rose with15 mm

1.00 Each 279.37 Each

or 20mm inlet.(A)100 mm dia.

Providing and fixing Kitchen sink with C.I. or M.S.

brackets, painted white including cutting holes in walls

1.00 Each and making good the same but excluding fittings. 2257.69 Each

(C)Vitreous China Sink.(i) 600mm x 450mm x 150mm

Providing and fixing in position cowel vent to pipes (B)

2.00 Each 496.90 Each

Providing and fixing C.P. Brass Two Way Bib Cock

1.00 Each 500.00 Each

(As Per Market Rate)

Providing and fixing Brass scrws down stop tap(B)

2.00 Each 221.59 Each

Providing and fixing Gum metal check or non return

1.00 Each 416.47 Each

fulway wheel valve (c) 25 mm dia.

Providing and fixing screw down bib taps of following

5.00 Each size.(A) Brass screw down bib tap polished bright. (i) 184.98 Each

Providing and fixing water closet squatting Pan (Indian

type W.C. Pan) size 580mm (Earthwork, bed

1.00 Each concrete,foot reste and trap to be measured and paid 938.70 Each

for separately) (A) Vitreous China.(I) Long pattern =

Providing and fixing pillar tap, capstan head, screw

2.00 Each down high pressure with screws, shanks and back 305.67 Each

nuts.(i)15mm dia.

Providing and fixing chromium plated brass half trun

1.00 Each flush cock of approved quality including fixing in pipe 252.36 Each

line etc. complete.(i) 20mm dia.

Applying two coats of putty & two coats of approved

brand and manufacture on new wall surface to give an

441.16 Sqm 40.19 Sqm

even shade including throughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth. (P.No/146,Item no/19032)

Wall painting (two coats)with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Painting Two coats ( Excluding priming coat) on

previously painted steel and other metal surface with

enamel paing brushing to give an even shade including

31.40 Sqm cleaning the surface of all dirt dust and other foreign 149.66 Sqm

matter + Extra over item 7 and 11 for every subsequent

Painting wall with APEX exterior emulsion paint on

wall surface two coats of painting and one coat of rimer

136.88 Sqm coat of APEX paint to given an approved brand and 113.40 Sqm

manufacture and of require shade and even shade after

brushing the surface to remove all dirt & dust.

Electrick point with ISO standerd company switch,

42.00 Each wire,pipe, board and all electric spare parts including 1000.00 Each

labour charge etc.complete.

Ad 1 % Labour Cess Rs.