RequiredOEM Authorization Certificate High Pressure Breathing Air Compressor Petrol Engine Driven ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Objective of Portable High Pressure Breathing Air Compressor 3 to 35/10 cfm Petrol Engine Driven Portable High Pressure Breathing Air Compressor Motor Driven ffor SCUBA Diving
RequiredFire Fighting & Rescue Services Industrial Breathing Air Safety System
RequiredMilitary
RequiredPaintball High Pressure Pneumatic Testing of Valves and similar components Portable High Pressure Breathing Air Compressor Motor Driven ffor SCUBA Diving
RequiredFire Fighting & Rescue Services Industrial Breathing Air Safety System
RequiredMilitary
RequiredPaintball High Pressure Pneumatic Testing of Valves and similar components Referred Indian Generally conforming Generally conforming 1/5 Standard Specification to IS 15879 latest to IS 15879 latest CONSTRUCTION Selectable pressure control switch on compressor YES * Pressure switch Type Dial Gauge Pressure Switch on Compressor * Charging adapter for fire fighting standard DIN adapter of 300 bar for charging for fire fighting breathing appratus cylinder * Charging adapter for under water diving special adopter of 232 bar to charge under water diving breathing air cylinder * Built in Immediate and Final Pressure safety valve YES * Two charging hoses each with adopter for 300 bar and one special adopter for 232 bar with safety valve suitable to fill two cylinders at 300 bar or one at 300 bar and one at 232 bar YES * Repair/Tool Kit YES * Compressor lubricating system splash type * Start
RequiredStop and Emergency Stop butons on control panel of compressor YES * Feature for auto drain of moisture in the system for moisture drain in a tank at regular interval YES * Final stage pressure gauge YES * Prime Mover 4 stroke petrol engine (BS-IV complied) of reputed make with rope start complete with air intake system
Requiredfuel system
Requiredlubrication system 4 stroke petrol engine (BS-IV complied) of reputed make with rope start complete with air intake system
Requiredfuel system
Requiredlubrication system Petrol engine shall YES * 2/5 meet the requirements of Environmental(Prote ction) Rules 1986 as laid down by Min of Environment & Forests read with GSR 371 (E) dated 17/5/2002
RequiredGSR 520(E)dated 1/7/2003
RequiredNo 448 (E)dated 12/07/2004
RequiredGSR 771(E) dated 11/12/2013 GSR 232(E)dated 31/03/2014
RequiredGazette Notification No 167 dated 31/03/2014 and Gazette Notification No 578 dated 11/11/2014 in respect of noise and emission norms The latest amendments to above GSRs shall be applicable as and when amended by Ministry of Environment and Forest No contamination from exhaust gases from combustion engine powered compressor the air drawn into the system YES * Spare filter cartridge 2 sets * One oil Refill YES * General arrangement drawing to be provided YES * Commissioning and Training at site YES * Operation manual with maintenance and repair instruction to be included YES * PERFORMANCE Maximum Operating Pressure(must declare) 330 Up to 410 Cylinder Charging Range any pressure between 232 bar to 300 bar any pressure between 232 bar to 300 bar Cylinder charging Rate (cfm) 3.5 3 - 3.5 Breathing air filteration system to be provided at intake and at final point of use to ensure * 3/5 highest level of purity of air delivered as per DIN12021 or CGA-E or any equivalent international standard O2 concentration by volume in Breathing air (%) 20.9 * Carbon mono oxide in Breathing air (ppm) 5 * Watervapor in Breathing Air 35 ppm at cylinder outlet (cylinder pressure >20 MPa (g) * Oil components (Condensed hydrocatbons) (mg/m³) 0 * Odour
Requiredflavour substances and taste Free of any significant odour or taste * Light weight
RequiredRugged
RequiredTransportable equipment of modular design YES * Equipment weight (must declare) 50 Kg 40 Kg
Required50 Kg
Required60 Kg Noise level at one meter distance (dba) 84 * CERTIFICATION Availability of Type Test Report to prove conformity of declared parameters to the specification from any ILAC/NABL accredited/Central Govt Lab YES * Test Report Number and Date - * Name of the Lab where test Conducted - * Product Warranty (Years) 2 Above 2 Service Warranty for Parts from date installation (Years) 5 Above 5 * Bold specifications are the golden parameters.
