REPAIR OF WOODEN AND STEEL FURNITURE AT MIL STN DHARAMSHALA

Amount

Bed plywood Top (FD-246, FD-1102, FD-247 & FD-21) Renewal of following old unserviceable parts of Bed plywood Top by replacing the same with new all as per drawings or sample kept in GE office and making item serviceable:-

Renewal of unservicable long rails made out of well seasoned sheesham wood, made to shape as per drawings fixed with fevicol, bamboo pins ,screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable bed plywood top 12mm thick (07 Ply) BWR grade, ISI marked conforming to IS 303 commercial type of size 1800x900mm, fixed with screws and three stiffeners after taking out the unserviceable plywood top complete all as specified and directed by Engr-in-charge. Make:- Century plywood/ Archid ply/ Kitply.

Polishing to unservicable bed new or old exposed to view with french polish after filling the holes/ cracks with putty, making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Table 900x606x760 mm WITHOUT drawer (FD-55 & 284) Removing existing worn out and unserviceable parts of the table as under and renewal of the same all as per drawings and making functional:

Renewal of unservicable legs made out of well seasoned sheesham wood, made to shape as per drawings fixed with fevicol, bamboo pins ,screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rails made out of well seasoned sheesham wood, made to shape as per drawings fixed with fevicol, bamboo pins ,screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rails made out of well seasoned sheesham wood, made to shape as per drawings fixed with fevicol, bamboo pins ,screws etc, complete all as specified and directed by Engr-in-charge.

New top of size 900mm x 600 mm made out of 18/19 mm thick prelaminated particle board with teak face and providing teak wood beading 4mm thick all around the top duly french polished with two coats of french polish complete as directed by Engr-in-charge.

Polishing to table 900mm x 600mm x 760 mm new or old with two coats of french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

Teapoy Wooden/Verandah (FD-278, 232 & 382) Renewal of following old unserviceable parts of Teapoy Wooden by replacing the same with new all as per drawings or sample kept in GE office and making item serviceable:-

Renewal of unservicable Teapoy top made out of pre-laminated particle board size 600x450x19mm thick (OST) with teak face made to shape with teak edging 4mm thick all round the top as per drawing after taking out old broken/ cracked top carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable leg made of well seasoned sheesham wood, made to shape, wrought all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Polishing the teapoy with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.

Table Centre (FD-274, 235, 29 & FD-375) Renewal of following old unserviceable parts of Table Centre by replacing the same with new all as per drawings or sample kept in GE office and making item serviceable:-

Renewal of unservicable top made out of pre-laminated particle board size 900x450x19mm thick (OST) with teak face made to shape with teak wood edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.

Renewal of unservicable leg made of well seasoned sheesham wood, made to shape, wrought all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Polishing the table centre with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.

Table Peg (FD-266, FD-384, 1114, 364 & FD-277) Renewal of following old unserviceable parts of Table peg by replacing the same with new all as per drawings or sample kept in GE office and making item serviceable:-

Renewal of unservicable top made out of pre-laminated particle board, exterior grade of size 450x300x19mm thick (OST) with one side teak face and other side white made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Renewal of unservicable leg made of well seasoned sheesham wood, made to shape, wrought all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Polishing the peg table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.

Table Writing (FD-275,FD-33, 249 , 1116 & FD-268) Renewal of following old unserviceable parts of Table Writing by replacing the same with new all as per drawings or sample kept in GE office and making item serviceable:-

Renewal of unservicable legs made of well seasoned sheesham wood made to shape, wrought all as per drawings fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rails made of well seasoned sheesham wood made to shape, wrought all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rails made of well seasoned sheesham wood made to shape, wrought all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board, exterior grade, one side teak face and other face white of size 1200x600x19mm thick made to shape with teak edging 4mm thick all round the top as per drawings complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface on direct to vision complete all as specified and directed by Engr-in-charge.

Chair Dining (FD-279,16, 203,1115 and 228) Renewal of following old unserviceable parts of chair dining steel by replacing the same with new all as per drgs or sample kept in AGE(I) office and making item serviceable:-

Recanning of chair dining with half round polythene cane 2.5mm wide 0.4mm thick for seat in Godrej pattern and border with 2.0mm wide 0.4mm thick finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing or as directed/ aproved by Engr-in-charge.

Renewal of unservicable front leg made out of well seasoned sheesham wood, made to shape duly wroughted all as per drawing fixed with fevicol, bamboo pins, screws etc, including PVC shoes complete all as specified and directed by Engr-in-charge.

Renewal of unservicable rear leg made out of well seasoned sheesham wood, made to shape duly wroughted all as per drawing fixed with fevicol, bamboo pins, screws etc, including PVC shoes complete all as specified and directed by Engr-in-charge.

Renewal of unservicable side, front and back rail made out of well seasoned sheesham wood, made to shape duly wroughted all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable back ,top stiffners made of well seasoned sheesham wood, duly wrought as per drawings complete all as specified and directed by Engr-in-charge.

Renewal of unservicable bottom stiffners made of well seasoned sheesham wood, duly wrought as per drawings complete all as specified and directed by Engr-in-charge.

Polishing to chair new or old with two coats of french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

Chair Easy (FD-229, 1108 & 17) Renewal of following old unserviceable parts of chair easy by replacing the same with new all as per drawings or sample kept in GE office and making item serviceable:-

Renewal of unservicable front leg made out of well seasoned sheesham wood, made to shape duly wroughted all as per drawing fixed with fevicol, bamboo pins, screws etc, including PVC shoes complete all as specified and directed by Engr-in-charge.

Renewal of unservicable rear leg made out of well seasoned sheesham wood, made to shape duly wroughted all as per drawing fixed with fevicol, bamboo pins, screws etc, including PVC shoes complete all as specified and directed by Engr-in-charge.

Renewal of unservicable arm rest made out of well seasoned sheesham wood, made to shape duly wroughted all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable side, front and back rail of seat frame made out of well seasoned sheesham wood, made to shape duly wroughted all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable back top stiffner made out of well seasoned sheesham wood, made to shape duly wroughted all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Recanning of chair with half round polythene cane 2.5mm wide 0.4mm thick for seat in Godrej pattern and border with 3.5mm wide 0.5mm thick finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing or as directed/ aproved by Engr-in-charge.

Polishing to chair new or old with two coats of french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

Table dressing ladies with mirror/ Table dressing ladies with stool ( FD-25 ,32(M), 251,378 & FD/MAP-II/07) Renewal of following old unserviceable parts of Table dressing ladies with mirror/ Table dressing ladies with stool by replacing the same with new all as per drawings or sample kept in GE office and making item serviceable:-

Renewal of unservicable mirror of size 1220mmX388mm, 5 mm thick electro copper poated totally free from distortion fixed on and including teak wood frame of size 25mmX20mm allround and 4 mm thick BWR grade (3 ply), commercial plywood in the back. Mirror shell be of polished sheet glass of make :- Atul /Modiguard as approved. The fixing and finishing shall be done in accordance with standard workmanship and drg and directed.

Renewal of unservicable sides made of prelaminated particle board exterior grade with one side teak faced and other white face of size 19mm thick including 4mm thick teak wood edging all around all as per drawings. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Renewal of unservicable top of table made of prelaminated particle board exterior grade with one side teak faced and other white face of size 19mm thick including 4mm thick teak wood edging all around all as per drawings. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Renewal of unservicable bottom of table made of prelaminated particle board exterior grade with one side teak faced and other white face of size 19mm thick including 4mm thick teak wood edging all around all as per drawings. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Renewal of unservicable drawer of 6mm thick (07 Ply) commercial ply wood BWR grade, ISI marked conforming to IS 303 commercial type of size as per drawing, complete all as specified and directed by Engr-in-charge. Make:- Century plywood/ Archid ply/ Kitply.

Polishing to table dresing new or old with two coats of french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

SOFA SET 4/5 SEATER (FD-258, 281) Renewal of following old unserviceable parts of sofa set 4/5 seater by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of broken/damaged front leg of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of broken/damaged rear leg of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of unservicable cushions of sofa set. of size 21"x22"x100mm of 32 density covered with superior quality tapestry cloth (shall not be less than Rs 200.00 per mtr) ans shall be as per sample kept in BSO's office of shade as approved by GE/Engineer in change . rest all as per drg. make .sleepwell/ kurlon/featherlite.

Polishing to sofa set new or old with two coats of french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

Table Office Clerk Steel (FD-84, & 1004) Renewal of following old unserviceable parts of Table Office Clerk Steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of unserviceable top , 1200x 600mm, made out of 18/19 mm thick prelaminated particle board one side teak faced and other side white, exterior grade of size as per drawing with 4mm teak wood beading all round the top, complete all as specified and directed by Engr-in-charge.

Removing of dents and bends and smoothening the defective place and repairs to drawers includung necessary nuts, bolts, clips and washers as to slide easily in and out of the table including providing brass lock of drawers with duplicate keys, complete all as specified and directed by Engr-in-charge.

Chair Verandah (FD-19 (M), 256, 333 & 359) Renewal of following old unserviceable parts of CHAIR VERANDAH by replacing the same with new all as per drgs or sample kept in GE office and making item serviceable:-

Painting of old chair verandah (steel frame structure) with two coats of synthetic enamel white paint over a coat of chromium red oxide metal primer , after complete removal of existing paint including preparation of surface, complete all as specified and directed by Engr-in-Charge.

Removing of old/ worn out cane plastic from seat and back of chair and recanning with new 4mm with half round cane plastic white in colour, made of superior quality plastic in mat pattern including providing PVC shoes best quality (4 No's in each chair) all as per drawing/directed by Engineer-in-charge.

Charpoy GI Pipe With Plywood Top (FD-220) Renewal of following old unserviceable parts of CHARPOY GI PIPE WITH NYLON NEWAR/ PLYWOOD TOP by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal old worn out and unserviceable nylone newar & old plywood top and providing new plywood 12mm thick 7 Nos of ply BWR Grade ISI marked to IS-303 type BB plywood commercial type of size 1980 x 950mm with and including 8mm dia round head counter shank bolts and nuts and with washer by drilling 3 holes each on long rails and 2 holes each on short railscomplete all as specified and directed by Engr-in-charge.

Table 900x600x760 mm, steel (FD-1004) Removing existing worn out and unserviceable parts of the table as under and renewal of the same all as per drawings and making functional:-

New top of size 900mm x 600 mm made out of 18/19 mm thick prelaminated particle board , exterior grade with teak face and providing teak wood beading 4mm thick all around, fixed to table with 35mm round head steel screws complete as directed by Engr-in-charge.

Table Dining 06 persons (FD-1115) Removing existing worn out and unserviceable parts of the table as under and renewal of the same all as per drawings and making functional:-

Renewal of unservicable legs made out of well seasoned sheesham wood, made to shape as per drawings fixed with fevicol, bamboo pins ,screws etc, complete all as specified and directed by Engr-in-charge.

New top of size 1800 mm x 900 mm made out of 18/19 mm thick prelaminated particle board with teak face and providing teak wood beading 4mm thick all around the top duly french polished with two coats of french polish complete as directed by Engr-in-charge.

Polishing to table dining 06 persons new or old with two coats of french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

Almirah Steel Large (DRG No FD-67(M), FD-1031, 1033, 339, 351, 67 & FD/E6/MAP/18):- Taking out old following unsv components of Almirah large steel and replacement with new components as per shape and size of original, complete all as specified and shown on drawing or as directed.

Welding to broken joints with gas welding at top and bottom n exc. 2.5cm in length and thickness of metal to be welded n.exc 6mm, making the welded joint smooth by grinding etc, complete all as specified and directed by Engr-in-Charge.

Renewal of broken/ unservicable mild steel hinges of size 75 mm and of same pattern, complete as shown in drawings, specified and as directed by Engr-in-Charge.

Renewal of broken /unserviceable door handle with new mild steel chromium plated door handle with fittings complete all as shown on drawings, as specified and directed by Engr-in-Charge.

Renewal of unserviceable bottom based leg made out of mild steel sheet 1.25 mm thick, fixed with gas welding duly painted with a coat of red oxide zinc chrome primer complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Renewal of unserviceable almirah locks with new locks, 50mm size , 6 liver brass with duplicate keys complete all as shown on drawing, as specified and directed by Engr-in-Charge. Make : Harrison / Jayant/Link

Renewal of old worn out unserviceable shelves with new shelves made out of mild steel plain sheet of 1mm thick nominal thickness made to shape and size duly painted with a coat of red oxide zinc chrome primer complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Painting to complete almirah internally and externally both sides after preparing the surface by scraping, denting and cleaning of old painted steel surface with electric grinder and sand emery paper, applying putty etc and finally applying two coat of synthetic emamel paint olive greeen by spray machine over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Almirah Med Steel with Shelves/ Almirah Med Steel 1/2H, 1/2 Shelves/ Cup board steel (FD -108, 342, 243, 110, 68, 1034, 340, 350, 67(M) & FD-1032 Taking out old following unsv components of Almirah medium steel and replacement with new components as per shape and size of original, complete all as specified and shown on drawing or as directed.

Welding to broken joints with gas welding at top and bottom n exc. 2.5cm in length and thickness of metal to be welded n.exc 6mm, making the welded joint smooth by grinding etc, complete all as specified and directed by Engr-in-Charge.

Renewal of broken/ unservicable mild steel hinges of size 75 mm and of same pattern, complete as shown in drawings, specified and as directed by Engr-in-Charge.

Renewal of broken /unserviceable door handle with new mild steel chromium plated handle with fittings complete all as shown on drawings, as specified and directed by Engr-in-Charge.

Renewal of unserviceable bottom based leg made out of mild steel sheet 1.25 mm thick, fixed with gas welding duly painted with a coat of red oxide zinc chrome primer complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Renewal of unserviceable almirah locks with new locks, 50mm size , 6 liver brass with duplicate keys complete all as shown on drawing, as specified and directed by Engr-in-Charge. Make : Harrison / Jayant/ Link.

Renewal of old worn out unserviceable cleats , nut & bolts to provied support for shelves, complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Renewal of old worn out unserviceable shelves with new shelves made out of mild steel plain sheet of 1mm thick nominal thickness made to shape and size duly painted with a coat of red oxide zinc chrome primer complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Painting to complete almirah internally and externally both sides after preparing the surface by scraping, denting and cleaning of old painted steel surface with electric grinder and sand emery paper, applying putty etc and finally applying two coat of synthetic emamel paint olive greeen by spray machine over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Locker Steel FD (FD-257, 127 & 1029) Taking out old following unsv components of locker steel and replacement with new components as per shape and size of original, complete all as specified and shown on drawing or as directed .

Welding to broken joints with gas welding at top and bottom n exc. 2.5cm in length and thickness of metal to be welded n.exc 6mm, making the welded joint smooth by grinding etc, complete all as specified and directed by Engr-in-Charge.

Renewal of unserviceable/ broken hinge fixed with 10 mm dia mild steel rivet complete all as per drawing, as specified and directed by Engr-in-Charge.

Renewal of unserviceable broken bow handle with new mild steel chromium plated steel bow handles 100 mm long complete all as per drg as specified and directed by Engr-in-Charge.

Renewal of unserviceable locks with new locks, 50mm size , 6 liver brass with duplicate keys complete all as shown on drawing, as specified and directed by Engr-in-Charge. Make : Harrison / Jayant/ Link.

Renewal of unserviceable bottom based leg made out of mild steel sheet 1.25 mm thick, fixed with gas welding duly painted with a coat of red oxide zinc chrome primer complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Renewal of old worn out unserviceable cleats , nut & bolts to provied support for shelves, complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Renewal of old worn out unserviceable medial shelves of locker steel with new shelves made out of mild steel plain sheet of 1mm thick nominal thickness made to shape and size duly painted with a coat of red oxide zinc chrome primer complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Painting to complete locker steel internally and externally both sides after preparing the surface by scraping, denting and cleaning of old painted steel surface with electric grinder and sand emery paper, applying putty etc and finally applying two coat of synthetic emamel paint olive greeen by spray machine over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Table Dining ORs (FD-165) Taking out old following unsv components of table dining ORs and replacement with new components as per shape and size of original, complete all as specified and shown on drawing or as directed .

Removing of dents and bends and smoothening the defective place and painting of table frame with two coats of synthetic enamel paing olive green/ black/ white/ grey over a coat of red oxide zinc chrome primer after repairing the joints with gas welding / nuts-bolts/ screw and washer , duly scrapping and cleaning the surface with abrasive embry paper for smooth paiting , complete all as specified and directed by Engr-in-charge.

Renewal of top made out of pre-laminated particle board size 1900x685x18mm thick one side teak face with teak wood edging 4mm thick all round the top as per drgs after taking out old broken/cracked top carefully, complete all as specified and directed by Engr-in-charge.

RACK STEEL 6/7 TIERS (FD-106 (M), 345 & 1038) Taking out old following unsv components of rack steel and replacement with new components as per shape and size of original, complete all as specified and shown on drawing or as directed .

Renewal of 8mm dia, 40mm long hexognal round bolts with nuts & washer, to existing shelf of racks and make it functional , complete all as specified and shown on drawing or as directed .

Renewal of corner bracket of size 150mmx150mm at four corners of rack steel , fixed with HRH bolts and nuts of size 8mm, 40mm long , complete all as specified and shown on drawing or as directed .

Painting to rack 6/7 tiers on all sides after preparing the surface by scraping, denting and cleaning of old painted steel surface with electric grinder and sand emery paper, applying putty etc and finally applying two coat of synthetic emamel paint sliver grey over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

CHAIR CB STEEL TUBULAR WITH ARMS (FD- 75 (M) Taking out old following unsv components of chair CB steel and replacement with new components as per shape and size of original, complete all as specified and shown on drawing or as directed .

Renewal of unserviceable/ broken MS support cleat made out of MS flat 12x3mm , 535mm long ( 2 Nos Each Chair) with gas welding, complete all as specified and shown on drawing or as directed .

Renewal of existing broken seat with new seat with frame made out of seasoned sheesham wood duly french polished in black shade and woven with 2mm half round new white plastic cane in godrej pattern and locked with 3mm thick half round cane plastic border , fixed to frame with macnine screws ,complete all as specified and shown on drawing or as directed .

Renewal of existing broken back with new back with frame made out of seasoned sheesham wood duly french polished in black shade and woven with 2mm half round new white plastic cane in godrej pattern and locked with 3mm thick half round cane plastic border , fixed to frame with macnine screws ,complete all as specified and shown on drawing or as directed .

Renewal of existing unserviceable/ broken arms rest with new arm rest of seasoned sheesam wood , made to shape and size duly french polished in black shade , complete all as specified and shown on drawing or as directed .

TABLE OFFICE OFICERS STEEL (FD-1003, 306 & 84) Taking out old following unsv components of Table office officers steel and replacement with new components as per shape and size of original, complete all as specified and shown on drawing or as directed .

Renewal of unserviceable top made out of size 1500x900x18mm thick pre-laminated particle board one side teak faced, exterior grade with 4mm teak wood beading all round the top, complete all as specified and directed by Engr-in-charge.

Removing of dents and bends and smoothening the defective place and repairs to drawers as to slide easily in and out of the table including providing brass lock of drawers with duplicate keys, complete all as specified and directed by Engr-in-charge.

Bed Hard Steel MAP (FD/E6/MAP/08 (R) Renewal of following old unserviceable parts of Bed Hard Steel MAP by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of unserviceable 12mm thick, 7 ply, commercial ply wood, BWR grade, ISI marked complete all as per drawings, specified and as directed by Engr-in-charge.

Painting bed steel on all side with one Coat of synthetic enanimal black paint after scraping cleaning of surfaces with abrasive paper of smooth painting complete all as shown in drawing and as directed.

Trestle Store room wooden (FD-86) Renewal of following old unserviceable parts of TRESTLE STORE ROOM WOODEN by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs of trestle of size 100 x 100 x 405 mm, made out of 1st class Hard wood sheesham after applying two coats of creosote oil including preparation of surfaces complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rails of size 2440 x 100 x 100 mm, made out of 1st class hard wood sheesham after applying two coats of creosote oil including preparations of surfaces complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rail of trestle of size 600 x 60 x 100 mm made out of 1st class Hard wood sheesham after applying two coats of creosote oil including preparations of surfaces complete all as specified and directed by Engr-in-charge.

Renewal of unservicable centre rails of size 2440 x 60 x 100 mm, made out of 1st class hard wood sheesham after applying two coats of creosote oil including preparations of surfaces complete all as specified and directed by Engr-in-charge.

Table Bed Side (FD- 210, 248, 28) Renewal of following old unserviceable parts of TABLE BED SIDE/ BED SIDE (MAP) by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable back of table bed side writing 6mm thick (07 Ply) commercial ply wood BWR grade, ISI marked conforming to IS 303 commercial type of size as per drawing, complete all as specified and directed by Engr-in-charge. Make:- Century plywood/ Archid ply/ Kitply.

Renewal of unservicable table shelves made out of pre-laminated particle board of size as per drawing (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Renewal of unservicable table side made out of pre-laminated particle board of size as per drawing (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Renewal of unservicable table top made out of pre-laminated particle board of size 450x350x19mm thick (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Renewal of unservicable table bottom made out of pre-laminated particle board of size as per drawing (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Chair Dining FD/ E6/ MAP/ 05 Renewal of following old unserviceable parts of Chair Dining CB/ Chair Dining JCOs/ Ors by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front leg made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable rear leg made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable side front and back rails made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable back rest made out of well seasoned sheesham wood, made to shape duly wroughted all as per drawing fixed with fevicol, bamboo pins, screws etc, complete all as specified and directed by Engr-in-charge.

Renewal of unservicable PVC seat of chair dinning JCOs/ Ors size all as per drawing complete all as specified and directed by Eng-in-Charge. Make of PVC seat shall be : AMOKO

Polishing to chair new or old with french polish after filling the holes, cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina to the surface direct to vision complete all as specified and directed by Engr-in-Chrge.

Renewal of unservicable stiffner made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked stiffener carefully complete all as specified and directed by Eng-in-Charge.

Chair writing FD-1107, 271 & 280 Renewal of following old unserviceable parts of chair writing by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front legs made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable rear legs made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable side, front and back rails made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable arms for chair writing made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked arms carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable bottom stiffners in rear leg made out of sheesham wood, made to shape duly wroughted all as per drg after taking out old broken/ cracked stiffeners carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable back top stiffners in rear leg made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked stiffeners carefully complete all as specified and directed by Engr-in-charge.

Recanning of complete seat with plastic cane of 2mm wide half round and perimeter canning with 3mm wide hald round of make premium in Godrej pattern complete all as specified and directed by Engr-in-charge.

Polishing to chair new or old with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

SIDE BOARD (FD-241) Renewal of following old unserviceable parts of SIDE BOARD by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable MDF board 18mm thick with plastic laminated sheet 1mm thick on one side approx size of top 1200x455mm as in top of side board complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable complete drawer made out of board 18mm thick, exterior grade with 1 mm thick laminated sheet on front of drawer (on one side only) complete all as shown on drawings and as directed by Engr-in-Charge.

Renewal of unservicable back made out of ply wood 6mm thick (exterior grade) both side commercial as in back of side board complete all as shown on drawings and as directed by Engr-in-Charge.

Renewal of unservicable shutters (complete set) made out of MDF board 18mm thick, exterior grade with plastic laminated sheet 1mm thick on top only. Shutters to be fixed with mild steel chromium plated continuous piano hinges with steel screws of required size and no's all as shown on drawings and as directed.

Renewal of unservicable shelf cabinet made out of 18mm thick MDF board, exterior grade all as shown on drawings and as directed.

Renewal of unservicable side made out of 18 mm thick MDF board, exterior grade all as shown on drawings and as directed.

Renewal of unservicable botton long rail made out of 1st class hard wood Sheesham all as shown on drawings and as directed.

Renewal of unservicable bottom plank made out of 18mm thick MDF board (exterior grade) all as shown on drawings and as directed.

Polishing of side board complete with french polish on exposed to view after preparation the surface with emery paper and putty complete all as specified and directed by Engr-in-Charge.

TABLE BED SIDE STEEL (MAP) DRG No- FD/E6/MAP/15(R) Renewal of following old unserviceable parts of table bed side steel by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable

Renewal of top of table bed side 19mm thick pre-laminated particle board 19mm thick of size as mentioned in drawings with one side teak face and other side white made to shape with PVC edging alround all as per drawing complete all as specified and directed by Engr-in-charge.

Renewal of unservicable drawer (Top drawer) made out of board 18mm thick, exterior grade, with laminated sheet 1mm thick on front of drawer (Laminated sheet on front side of drawer only) complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable drawer (Bottom drawer) made out of board 18mm thick, exterior grade, with laminated sheet 1mm thick on front of drawer (Laminated sheet on front side of drawer only) complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable back of table made out of plywood 6mm thick (exterior grade) both side commercial complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable side of table made out of plywood 6mm thick both side commercial complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable side of table made out of MDF prelaminated board 18mm thick (exterior grade) commercial complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable front leg made of 18 sqmm condute pipe complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable U shape rear leg made of 18 sqmm condute pipe complete all as specified and directed by Engr-in-Charge.

CHAIR MOULDED PLASTIC WITH ARMS SUPREME ORNATE (TRADE PATTERN) Renewal of following old unserviceable parts of chair moulded plastic by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable

Renewal of unservicable seat of chair and S& F new seat supply by company made of standard manufacturers make supreme mpdel ornate red color (approved best qualitiy) to be fitted with nut and bolt of required size complete all as specified and directed by Engr-in-Charge.

Table Dining 8 pers (FD-1115) Renewal of following old unserviceable parts of Table Dining 8 pers by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short & long rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board size 1500x900x19mm thick (OST), made to shape with teak edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes, cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Table dressing Gents with mirror( FD-379) Renewal of following old unserviceable parts of Table dressing Gents by replacing the same with new all as per drgs or sample kept in GE office and making item serviceable:-

Renewal of unservicable top or bottom of table made of prelaminated particle board exterior grade with one side teak faced and other white face of size 18mm thick including 4mm thick teak wood edging all around all as per drawings. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Renewal of unservicable side rail of table made of prelaminated particle board exterior grade with teak veeners both side size of 18 mm thick. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Renewal of unservicable back side of table made of 4 mm thick plywood. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Renewal of unservicable mirror of size 760mmX388mm, 5 mm thick electro copper poated totally free from distortion fixed on and including teak wood frame of size 25mmX20mm allround and 4 mm thick BWR grade (3 ply), commercial plywood in the back. Mirror shell be of polished sheet glass of make :- Atul /Modiguard as approved. The fixing and finishing shall be done in accordance with standard workmanship and drg and directed

Renewal of unservicable box of table dressing shall be made out of 18mm thick partical board ext grade commerical over with 1mm thick plastic laminated sheet on top side bottom and drawers having drawers with knobs.

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 31 of tender doucments.

M/S MALHI CONSTRUCTIONS (BID ID -3352907)

Modern Enterprises (BID ID -3351568)