Improvement of Mota Lakhiya Approach road Km. 0/0 to 1/0 of Lalpur Taluka Under BUJ MMGSY Yojna Package No. JAM/ BUJ/ MMSGY/ RS / 2026-27/ P-02

Name of Work:- Improvement of Mota Lakhiya Approach road Km. 0/0 to 1/0 of Lalpur Taluka

Under BUJ MMGSY Yojna Package No. JAM/ BUJ/ MMSGY/ RS / 2026-27/ P-02

Taluka : Lalpur Dist: Jamnagar.

BILL OF QUANTITIES

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

1 Clearing and grubbing road land 0.30 Hect. 28455.09

including uprooting rank vegetation grass

bushes, shrubs, sapling and trees girth up

to 300 mm removal of stumps of trees cut

earlier and disposal of unserviceable

materials (C) By mechanical means in

area of light jungle

2 Rolling and watering of earthwork in 440.00 Cum. 23.17

layers with power roller including filling in

depressions which occur during the

3 Box cutting the road surface to proper 1238.00 Cum. 111.85

slope and camber for making a base for

road work including removing the

excavated stuff and depositing on the

road side slope as directed upto all lead.

4 Providing & laying compacted WBM 75m 310.00 Cum. 966.37

thick single layer as per MORTH

specification using mahcine crushed M.C.

metal of size 45mm to 90mm with using

0.27 Cu.m./10 Sqm stone screening

mm to 10mm nominal size and binding

materials @ 0.08 Cu.m. / 10 Sq.m.

including spreading in uniform thickness,

watering, and consolidation with vibratory

roller etc complete.

5 Providing and filling in foundation with 310.00 Cum. 3362.25

ordinary Cement concrete M-100 mix and

providing necessary vertical pin headers

including formwork, vibrating, ramming

and curing complete.

6 Providing and casting in situ Ordinary 619.00 Cum. 4979.30

trimix cement concrete M-250 road work

laid as directed including adding super

platisizer admixture of IS make and

providing and laying M.S. side rail of road

thickness with necessary nut bolts plates

fixing as per width applying plate vibrator

(electric or diesel) on channel

compressor with vacuum dewatering

system by using all necessary equipments

and materials and machinery such as

running screed vibrator on prelaid M.S.

channel for leveling ,Vacume pump,

floating and power towelling etc with

filling the joints with bitumen as directed

1 of 7 DTP of MMGSY P-02 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

7 Providing and fixing ordinary kilometer 1.00 No. 704.33

stone of precast C.C. 1:2:4 including

necessary reinforcement as per I.R.C.

type design fixing in C.C. 1:4:8 including

lettering and painting etc. complete.

8 Providing and fixing Hectometer stone as 4.00 No. 356.49

per I.R.C. type design including lettering

and painting etc. complete. (I) Fixing in

9 Providing and fixing guard stone as per 60.00 No. 106.01

I.R.C. type design including white

washing etc. complete.(i) Fixing in Earth

10 Providing and fixing indicator stone of 45.00 No. 102.84

approved stone as per I.R.C. type design

in C.C. 1:4:8 including white washing etc.

complete.(i) Fixing in Earth

11 Direction (Junction) Sign :-Providing and 1.00 No. 21287.50

fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite

Panel); size 244x122 cms. rectangular as per

design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated

with one coat of epoxy primer and two coats

of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications;

4.0mtr (2 Nos.) long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable

size iron angle of 50x50x5mm; painted with

bestquality epoxy coatings in black and white

bends. The details of symbol for each board

shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting.

2 of 7 DTP of MMGSY P-02 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

12 Sign board per Squate Meter :-Providing and 1.00 No. 7894.01

fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite

Panel); size 1meter x1 meter as per design of

IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat

of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4 mtr long stand post

(2 Nos.) of 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from

suitable size iron angle of 50 x 50 x 5mm;

painted with bestquality epoxy coatings in

black and white bends. the details of symbol

or inscription / numerals for each board shall

be as per the instruction of engineer in

charge.The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

13 Village name Sign :-Providing and fixing sign 1.00 No. 6397.43

boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size

90x60 cms. rectangular as per design of IRC-

67-2012. Pre treated with phospheting

process & acid etching; coated with one coat

of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. the details

of symbol or inscription / numerals for each

board shall be as per the instruction of

engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing

etc.complete under the supervision of

engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year

outdoor exposure test report from third party

test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

3 of 7 DTP of MMGSY P-02 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

14 Hazard Marker Sign :-Providing and fixing sign 2.00 No. 3518.68

boards made out of 2.0 mm aluminium sheet /

4 mm ACP (Aluminum composite Panel); size

90x30 cms. rectangular as per design of IRC-

67-2012. Pre treated with phospheting

process & acid etching; coated with one coat

of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 1.8mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details

of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation,

curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year

outdoor exposure test report from third party

test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

15 Providing and fixing of typical informatory sign 2.00 No. 8769.60

board with logo as per MORD specifications

and drawing. Three MS Plates of 1.6 mm thick,

top and middle plate duly welded with MS flat

iron 25 x 5mm size on back on edges. The

lower plate will be welded with MS angle iron

frame of 25mm x 25mm. The Angle iron frame

of the lower most plate and flat iron frame of

middle plate will be welded 2 nos. 75mm x

75mm of 12 SWG sheet tubes posts duly

embedded in cement concrete M-15 grade

block of 450mm x 450mm x 600mm, 600mm

below ground level. The top most Dimond

plate will be welded to middle plate by 47mm x

47mm of 12 SWG steel plate tube. All M.S. will

be stove enameled on both sides. Lettering

and printing arrows, border etc. will be

painted with ready mixed synthetic enamel

paint of superior quality in required shade and

colour. All sections of framed posts and steel

tubes will be painted with primer and two

coats of epoxy pains as per drawing Clause

1701 and Annexure

4 of 7 DTP of MMGSY P-02 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

16 Road marking with hot applied thermoplastic 200.00 Sqm. 367.72

paints with reflectorising glass beads on

bitumin surface providing and laying a hot

applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @

250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as

per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and

holes. zebra patta /bump patta lane/center

line/ edge line/cut patta. The white color

marking should provide liminance coefficinet

on cemend road shalll be min 130 mcd/m2/lux

and Asphalt road shall be min 100 mcd/m2/lux

during the service life during the day time.The

marking should meet the performance criteria

for night time reflectivity, wet reflectivity and

skid resistance as mentioned in the section-15

of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

17 Cat Eye / Road Stud / RPM: Supplying Raised 132.00 No. 326.23

Pavement Markers made of polycarbonate

and ABS moulded body and reflective panels

with Micro prismatic lens (No Glass bead lens)

capable of providing total internal reflection of

the light entering the lens face and shall

support a load of 13635 kgs. tested in

accordance to ASTM D 4280 Type H and

complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 Ð DO

III Dt 11.06. 1997. The height, width and length

shall not exceed 20 mm, 130 mm and 130 mm

and with minimum reflective area of 13 Sqcm

on each side and the slope to the base shall

be 35 +/- 5 degree. The body of the marker

should having finger grip for easy and

accurate placement and application with

epoxy / bituminous Adhesive as recommended

by the manufacturer of the marker. The color

of the marker should be as per the IRC 35-

2015 and as directed by Engineer-in-charge.

5 of 7 DTP of MMGSY P-02 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

18 Logo Board made out of 2mm aluminium 1.00 No. 4545.00

sheet, as per the drawing & design. Pre

treated with phospheting process and acid

etching coated with one coat of epoxy primer

and two coat of best quality epoxy paint,

refloctrorized with retro reflective sheeting as

per the latest M.O.S.T. specification, 3.1 Mt.

long stand post and frame fabricated from

suitable size iron angle of 35 x 35 x 3 mm, 75 x

75 x 6 mm as required painted with best

quality epoxy coatings in black and white

bends. The details of symbol for each board

shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 cms for each leg,

including excavation curing etc. complete

under the supervision of Engineer-In-Charge

(A) Class-B Type-4 Retro Reflective sheeting

19 Cautionary Warning Sign :-Providing and 4.00 No. 3906.18

fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite

Panel); size 90 x 90 x 90 cms. equilateral

triangle as per design of IRC-67-2012. Pre

treated with phospheting process & acid

etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as

per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details

of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation,

curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year

outdoor exposure test report from third party

test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above / below Percent [should be

written in figures and words] of the estimated rates mantioned above. Amount of my/our tender works out as under

Estimated Amount Put to tender: Estimated Amount Put to tender:

Deduct % below Add % above

Net Rs. Net Rs.

In words : In words :

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Panchayat (R & B) Sub Division Panchayat (R & B) Division

Jamnagar. Jamnagar.

6 of 7 DTP of MMGSY P-02 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

1 All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

2 All the columns is Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

3 Rates quoted include clearance of site (prior commencement of work and at its close )

in all respects and hold good for work under all conditions, site, moisture, weather etc.

4 The contractor shall exhibit the board at site of work with the details of works, Tender

amount and specification as per Govt. Circular No. BBG / 3277 / 1657 / N, Dt.26-4-78 and

as per G.R.No. TNC -1090-24-C, Dt.18-11-91, as directed by Engineer-in-charge of the

works, exhibit board at site of work, for which contractor is not entitiled for any extra

5 Contractor shall even " NIL " percentage, if no deduction is offered.

6 One percent of work done amount of this work shall be recovered from the contractor

payment as " Labour Cess " in terms of the Guajarat Govt. gazette extra ordinary dt.

12/12/2004 implementation of building and other construction works.(Regulation of

employment & condition of service act

7 Testing of materials shall be as per statement attched for quality control. The material

shall be tested in GERI bill for the testing charge shall be paid by the Department and

% (One percent) of amount put to tender after deduction of cost of material as per

scheule-A shall be recovered from the contractor's running Bill as per GR of R.& B.

Dept. No.TNC / 1085 / 4 / C Dt. 20-12-91 & modified R.& B. Dept. Circular No.SSR /

Signature of Contractor :

Deputy Executive Engineer Executive Engineer

Panchayat (R & B) Sub Division Panchayat ( R & B ) Division,

Jamnagar. Jamnagar

7 of 7 DTP of MMGSY P-02 07-26.xls