CONSTRUCTION OF CATTLE POND AT TILAKNAGAR FOR BHAVNAGAR MUNICIPAL CORPORATION,BHAVNAGAR.

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

Excavation for foundation for depth from 1.5 m to 3.0m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

Extra for additional depth more than 5.0 m for excavation

for foundation including sorting out and stacking of useful

materials and disposing of the excavated stuff upto 50 m

lead.(B) Dense or Hard soil

Boring holes 3.5 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the surplus

excavated soil as directed within a lead of 50 Meter for

following diameter of pipes.(iii) 300 mm

(ii) Uncoursed Rubble Masonry with hard stone of

approved quality in foundations and plinth in Cement

Mortar 1:5 (1-cement : 5-coarse sand including levelling

up etc. complete

Providing Supplying and laying Filling in foundation, plinth,

trench and uneven area of plot (for levelling and

maintianing slop) with murrum or selected soil in layers of

20 cm. Thickness. Including levelling, watering, ramming

and consolidating etc. comp (cow seating area,garden

soil,murrum)As dirceted by Architect.

Providing and laying ordinary cement concrete M-150

and curing complete including the cost of form work but

8.00 excluding the cost of reinforcement for reinforced 1940.41 CUM 4008.81

concrete work in Bases of Flooring and the like and Mass

concrete. For PCC

Providing laying Controled Reinforced cement concrete M-

using minimum Cement content @ 450 kg/Cmt including

curing etc complete including the cost of form work but

excluding cost of reinforcement for reinforced concrete work

in concrete road Coarse and fine aggregate confirming to

IS:383 maximum size of coarse aggregate not exceeding

mm, using mechanical weigh batcher, mixed as per approved

mix design, laid, placed & distributed with sufficient man

power using M.S. Side Rail of road thickness with necessary

9.00 nut bolt plates, fixing as per width, compacted with Poker 2495.65 CUM 5500.00

vibrator V.D. system ( Trimix ) & Surface Plate Vibrator,

Troweling to be carried out with the same machine running

on troweling blades, finished in a continuous operation

including provision of contraction, expansion, construction

and longitudinal joints, joint filler separation membrane,

sealant primer, joint sealant debonding strip, dowel bar, tie

rod, Surface Hardner must be spread on final concrete surface

to harden the top surface, admixtures as approved, curing

compound, finishing to lines and grades including form work.

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in :

(a) Foundations, footings Bases of columns and raft slab

Providing and laying controlled cement concrete M-200 for

11.00 R.C.C. bored piles including ramming, vibrating, curing and 83.58 CUM 4639.10

finishing complete.

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

12.00 the cost of reinforcement for reinforced concrete work in 97.73 CUM 8353.00

Columns, pillars, posts and struts for columns UP TO GROUND

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Columns, pillars, posts and struts for FIRST FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Beams, girders and cantilever up to floor For GROUND FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

15.00 the cost of reinforcement for reinforced concrete work in 217.42 CUM 6523.00

Beams, girders and cantilever up to floor For FIRST FLOOR all

floor above floor two level

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

COPING/LINTEL FOR ALL FLOOR ABOVE FLOOR TWO LEVEL

Providing and Laying Controlled Cement Concrete M-250 and

curing etc. Complete including the cost of form work and

17.00 excluding the cost of reinforcement etc complete in R.C.C. 266.70 CUM 7267.00

Slopping slabs for all thickness for up to floor two level ALL

FLOOR ABOVE FLOOR TWO LEVEL FOR GF

REINFORCED CEMENT CONCRETE: Providing and laying

machine mixed, machine vibrated, watertight controlled

reinforced cement concrete M-250 grade. Using 20 mm and

smaller size machine crushed black trap metal aggregate (of

approved size) and well sieved silt-free river sand in all types

and size of structures as shown in drawings including water

stopper between RCC wall, watering placing (pouring),

necessary scaffolding, hoisting, leaving pockets for pipe

flanges, sockets etc.as directed and keeping drip moulds,

grooves, including curing, testing, haking, as per direction

complete. Note: (1) RATES OF REINFORCED CEMENT

CONCRETE WORK SHALL BE INCLUSIVE OF SHUTTERING,

CENTERING BUT EXCLUSIVE OF STEEL REINFORCEMENT FOR

VERTICAL FINN/RCC PADDI.

Providing and Laying Controlled Cement Concrete M-250 and

curing etc. Complete including the cost of form work and

19.00 excluding the cost of reinforcement etc complete in R.C.C. 40.79 CUM 7267.00

slabs for all thickness for up to floor two level ALL FLOOR

ABOVE FLOOR TWO LEVEL FOR OHWT SLAB

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

20.00 the cost of reinforcement for reinforced concrete work in 1.01 CUM 7267.00

R.C.C. Chajja up to floor two level. ALL FLOOR ABOVE FLOOR

Providing, supplying and fixing MANGLOR TILE on sloping slab

21.00 in cement paste/ Chemical as approved , including necessary 54.00 Sq-Mt 272.00

vatta, curing etc. complete. As directed by Architect and EIC.

Providing TMT Bar FE 500 D/500 CRS STEEL reinforcement for

22.00 R.C.C. work including bending, binding and placing in position 185226.15 KG 72.92

complete upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

23.00 and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) 1263.55 CUM 4521.82

Conventional for ground floor (BRICK MASONARY) FOR

PLINTH AND GF LEVEL

Half brick masonry in common brunt clay building strength

not less than 35 Kg./Sqcm. In cement mortar 1:3 (1cement :

24.00 coarse sand) with 2 Nos. of 6 mm. Diameter mild steel round 94.20 SQM 697.17

bars after every three coarse embedded in cement mortar for

all floor up to floor two level

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)finished with trowel

including scaffolding curing etc. comp.For GROUND FLOOR all

floor above floor two level ceilings & soffits of stairs

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1- Cement:3- sand) finished with trowel

including scaffolding curing etc. comp.For GROUND FLOOR

20 mm thick gutco/sand faced cement plaster for OUT SIDE

on walls up to height 12 metres above ground level consisting

27.00 of 8 mm thick backing coat of C.M. 1:1 (1-Cement : 1-sand) 8452.13 SQM 347.10

etc. complete. UP TO FLOOR TWO LEVEL (GROUND + FIRST)as

directed by engineer in charge.

Providing & laying Heritage Flakes Wall Texture, Asbestos

Sheeting, with desire color of granite finish flakes, 3 mm to

28.00 8mm size up to 1.2 mm thick including bonding agent, 516.00 SQM 753.45

waterproofing compound, adhesives, etc all complete as per

instruction of Architect and or EIC.

Providing and laying 18-20mm average thick Granite stone

slab flooring cement mortar1:3 (1cement:3coarsesand) laid

over and jointed with grey / white cement slurry with

matching color of stone including half round nosing, rubbing

and polishing etc. complete. shade and pattern as directed by

Architect/enginner in charge.

Providing and laying Mirror & River finished Polished Kota

stone slab flooring laid over and jointed with grey cement

30.00 slurry including rubbing and polishing with grove cutting , 552.25 SQM 1009.30

moulding if required as directed & approved by Architect and

Authority etc complete.(A) 25 mm. Thick

Providing and laying Mirror & River finished polished kota

stone slab 25mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

Providing and laying 60 cm x 60 cm Antiskid Vitrified 8 mm

thick tiles flooring over over 20 mm (average) base of cement

mortar 1:6(1cement : 6 coarse sand) on new surfrace jointed

with colour cement slurry including finishing with flush

pointing and cleaning the surface etc complete shade and

pattern as approved by Architect and

EIC.Asian,Simpollo,Johanson, Swastik & Rak (Premium First

Quality) FOR ALL FLOOR

Providing and laying Ceramic tiles 600*300 6 mm. Thick in

kitchen,toilet and dado on 10 mm. Thick cement plaster 1:3 (1

cement : 3 coarse sand) pointing in white cleaned jointed with

white cement slurry. size, shade and pattern as approved

(matched to flooring) for all floor WALL as design by architect

and directed by EIC

Providing, Supplying and Fixing Polished Rajula Stone for seal

top/Wall cladding or Floor Machine cut, free edges, machine

polished Rajula stone slab 20 mm thick including necessary

groove at joint and on surfaceas as directed by architect laid

on 12MM thick fixing material jointed with grey cement slurry

with required chemical including rubbing and polishing

finishing and making groove etc complete.shade and pattern

as directed by Architect/enginner in charge.

Providing and laying broken coloured chine mosaic

flooring/Wall Cladding for landscape area fountain

storage using 12 mm to 25 mm broken pieces of colourfull

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white/colour cement/grout including

rounding off junctions and extending them upto

wall,clearing with water and oxalic acid etc. as directed.

WATER PROOF PLASTER: Providing 15 mm thick water proof

cement plaster with first coat of cement mortar 1:4 (1 -

cement : 4 - sand) and over a first coat finishing and

floating coat of neat cement paste mixed with integrated

36.00 water proofing compound in proportion mentioned by 255.00 SQM 241.00

manufacture including necessary scaffolding, curing etc.

complete for all floors.(NOTE: This plaster is to be applied

in toilet block floors, chhajja tops, underground water

tanks etc.) To be measured in SQ.MTS.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

cm x 7 cm. size including anodized alluminium fixtures

and fastenings including primer coat of approved quality

coats of oil painting etc, complete. (iii) Partly panelled

and partly glazed.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including black

enamelled iron oxidixed fixtures and fastenings including

primer coat of approved quality and two coats of oil

painting etc, complete. (i) Fully Glazed.

Providing corrugated G.I. sheet of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

Appliying priming coat over new wood and wood based

surface after and including preparing the surface by

40.00 throughly cleaning oil, grease, dirt and other foreign 149.82 SQM 44.20

matter, sand papering and knotting. (B) Ready mixed

paint brushing wood primier pink.

Painting two coats (excluding priming coat) on new wood

and wood based surface with enamel paint, interior to

41.00 give an even shade including cleaning the surface of all 147.61 SQM 95.00

dirt, dust and other foreign matter sand papering and

Providing and fixing M.S. grills of required pattern to wooden

frames or grenite jams of windows etc. with M.S. flats at

required spacings and frame alround, square or round bars

with round headed bolts and nuts or by screws (A) Plain Grill.

Applying two coats of Birla (white cement based) or Asian

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall/ceiling

surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Wall painting ( three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth. on walls shade and pattern

as design by architect and directed by EIC.

Wall painting ( three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated ceiling and

soffit surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. on ceiling and soffit

shade and pattern as design by architect and directed by EIC.

Finishing wall with 100% weather proof EXTERIOR paint of

approved make,brand and shade on wall surfaces (two coats),

with 100% damp proof primer one coats , recessed

/embossed panels, pillars etc., give an even shade after

throughly brushing the surface to remove all the dirt and

remains of loose powdered material. The material shall be as

described in list of approved material.shade and pattern as

design by architect and directed by EIC.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,45cm height and

47.00 15cm thick of M250 grade concret as per approved design and 2621.00 RMT 264.00

including excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I.Cover with frame of

mm x 300 mm size (inside) with standard weight. 100 m x

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35 kg. Cm² in C.M. 1:5 C.I. cover with

frame (Light duty) 455 mm x 610 mm internal dimensions,

total weight of cover with frame to be not less than

kg.(Wt. of cover 23 Kg.) and (Wt. of frame 15 Kg.) R.C.C. top

49.00 slab with 1:2:4 mix (1-cement :2-coarse sand : 4- graded stone 10.00 Each 2903.89

aggregate 20 mm size) foundation concrete 1 :5 :10 inside

plaster 15 mm thick with cement mortar 1 :3 finished smooth

with a floating coat of neat cement on walls and bed concrete

(A) Inside dimensions 500 mm x 700 mm and 450 mm deep

for pipe line with one or two inlets.

Providing and constructing Sewer manholes, scraper

manholes and unit house connection chamber, as per the

type design in brick masonary in C. M. 1:3 ,inside and outside

lastering in C. M. 1:3 necessary coping in R.C.C.M. 200 fixing C.

I. steps and fixing manhole frame and covers (But excluding

supply of manhole frame and covers) over manholes and

house connection chambers and fixing Manhole covers (but

excluding supplying of manhole covers) over scraper manhole

etc. complete, providing and fixing safety chain wherever

necessary as per the stipulations in the type desing complete

(excl. excavation). Manhole type "A" circular type having

inside diameter of minimum 1200 mm and for depth from

M to 1.50 M (for 150 mm to 500 mm dia sewers). Manhole

type "A" as above but up to 1.0 M depth.

Providing,Making, Fabricating, Eracting with Fixing M.S.

Fabricated Structure as per design, , m.s flat , M.S.box

pipe, M.S. round dia pipe M.S.Hollow Pipe top cover as per

design (square/round), M.S. polished square and round

shape as per design,MS angle & GI Concertina coil wire

for fencing, M.S Polished flat with making required size

hole at required spacing as design by architect and

directed by EIC.and hold fast with coach bolts & required

fitting including all as per drawing etc. complete.as design

by architect and directed by ARCHITEC

Applying priming coat over new steel and other metal

surfaces after and including preparing the surface by

thoroughly cleaning, oil grease, dirt and other foreign

matter and scoured with brushes fine steel wool, scrapers,

and sand paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat) on

new steel and other metal surfaces with enamel

53.00 paint, brushing interior to give an even shade including 14521.50 SQM 93.46

cleaning the surface of all dirt, dust and other foreign

Providing and fixing C.P.V.C. water supply pipes schedule

pipes confirming to ASTM F-441 for hot as well as cold water

supply with necessary fitting like Tee, Elbows, Union, coupler,

etc. in walls as well as floors concealed in walls and finishing

the wall with cement mortar to give each finish of brands like

Astrl or Finolex. Complete with necessary scaffolding at all

(A) 15 mm Ø C.P.V.C. pipes.

55.00 -Do- (B) 25 mm Ø C.P.V.C. pipes. 150.00 RMT 251.31

56.00 -Do- (C) 32 mm Ø C.P.V.C. pipes. 75.00 RMT 334.89

57.00 -Do- (D) 40 mm Ø C.P.V.C. pipes. 100.00 RMT 443.29

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

58.00 Foundation (NSF) seal for potable water of following dia. 1300.00 RMT 654.04

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc.complete. [F] 50mm.

Providing and fixing in position C.P.V.C. Ball valve confirming

59.00 to ASTM F-441 to water supply line. (A) 25mm Ø C.P.V.C. Ball 15.00 Each 481.00

60.00 -Do- (B) 32 mm Ø C.P.V.C. Ball valve. 15.00 Each 539.00

61.00 -Do- (C) 40 mm Ø C.P.V.C. Ball valve. 15.00 Each 597.00

Providing and laying to level and slope` under ground

62.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 75.00 RMT 390.00

outer and inner solid P.V.C. (A) 110 mm Ø 3.2 mm thick.

Providing and laying to level and slope` under ground

63.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 250.00 RMT 579.00

outer and inner solid P.V.C. (B) 160 mm Ø 4.7 mm thick.

Providing and laying to level and slope` under ground

64.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 50.00 RMT 730.00

outer and inner solid P.V.C. (C) 200 mm Ø 4.7 mm thick.

PProviding and fixing washbasin with single hole for pillartap

with C.I. or M.S. brackets painted white includingsutting holes

65.00 and making good the same but excluding fittings.(A) Vitreous 6.00 EACH 1505.90

China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour

Providing and fixing Urinal of approved quality

includingconnection with trap and with integral

longitudinal flush pipe complete set (unit) including

connecting the whole unit with water supply and

drainage.(in nos.) .(A) Squating plate pattern white

earthenware 550mm x 300mm.

Providing and fixing wash down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1- fine sand)

67.00 (A) vitreous China Pattern :(i) in white colour (all C.P. fitting of 7.00 EACH 1343.38

approved brand like Jaguar, ESS ESS or Cera) complete set

(unit) including connecting the whole unit with water supply

and drainage.(in nos.)

Providing and fixing chromium plated brass half trun

68.00 flushcock of approved quality including fixing in pipe line 7.00 EACH 261.16

etc.complete.(ii) 25mm dia

Providing and fixing self closing press matic bib cock with

69.00 flange and wall flange of make like Jaguar, ESS ESS, Cera (to 15.00 EACH 1584.00

be provided for water tubes in no.)

OVER HEAD PVC WATER TANK : Supplying, lifting and

installing in position, PVC water tank 'EURO' or equivalent

having cross section of tank wall having outer coloured layer,

U.V resistant layer, insulating layer and anti bacterial inner

layer. Cost including transporting, labour and making

necessary connection for inlet, outlet, linkage, overflow, wash-

out, etc.with required platform etc. as directed by engineer in

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

71.00 screaed down or higned grating including cost of cutting and 17.00 EACH 645.09

making good the walls and floor 100mm inlet and 50mm

outlet.(C) 100mm dia.

Exposed Wire cut Brick work using standard size of bricks

having crushing strength not less than 35 kg./Sq.Cm. with

72.00 Cement Mortar 1:6 (1-Cement : 6 -fine sand) including 24.38 CUM 16037.00

necessary scaffolding, curing etc. complete for all floors.

(EXPOSED BRICK MASONARY).

Pointing on brickwork with cement mortar 1:3 (1-cement

: 3-coarse sand) (A) Flush pointing

Applying Anti corrosve Chemical treatment Food Grade epoxy

for water retaining structure including cleaning the surface

thoroughly & making surface dry. Even & smooth for applying

treatment and coats.DCL1400 with 3 years Guarantee.

Providing and applying a protective and waterproofing

coating of approved quality [Bituminous Paint/Bitumen

Emulsion/Bituminous Mastic] conforming to IS: 158 (or

75.00 relevant IS code) on the external surface of the Reinforced 170.00 sqm 189.00

Cement Concrete (RCC) water tank, including all necessary

surface preparation, cleaning, and application of two or more

coats as specified by the engineer-in-charge, complete

76.00 JCB machine rental work at the site of excavation or cleaning 80.00 hour 1400.00

Providing & fixing approved make ISI marked HDPE 6Kg /

cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at for

above ground systems where pipes may be expoesd to cattel

movment or sunlight as directed. The pipes as following size

of dia & weight per 6 mtr.(A) 40 mm inner Dia. (1.68 Kg /

Providing & fixing approved make ISI marked HDPE 6Kg /

cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at for

78.00 above ground systems where pipes may be expoesd to cattel 300.00 RMT 80.00

movment or sunlight as directed. The pipes as following size

of dia & weight per 6 mtr.(B) 50 mm inner Dia. (2.5Kg/6RMT)

Providing and fixing irrigations butterfly sprinkler/sprayer

20mm agriculture/cattle farm 360 deg. with 15 ft redius 100 L

hose-end sprayer with including connecting the unit with

water supply.(in nos.) .

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete. Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete.Cat III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with

2-2.5 sq.mm Cu. Wire from mcb db board.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat III.

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories. Cat III.

84 Providing following type of Modular Type Accessories mounted

PVC / metallic/Wooden

single mounting base frame covere

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular

Providing & laying approved make ISI marked HDPE 6Kg

/ cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected

86 at road crossing on or floor as directed for laying of cable. 2800 Rmt 190.00

The pipes as following size of dia & weight per 6 mtr.(b)

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(k) 4.00Sq.mm

core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

88 to be laid on wall with necessary clamps or in existing 2800 Rmt 160.00

trench / pipe of following size of cables(C) 4 core 10 Sq.

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A)

With medium class Rigid PVC pipe and

accessories(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size(A)

With medium class Rigid PVC pipe and

accessories(b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq. mm copper

91 conductor FRLS PVC insulated stranded wire of green 500 Rmt 123.00

colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories(a) 2 wire

supplying and erecting sheet steel powdercoated cable

and termination box to be mounted on top or bottom of

92 the m.b.b.distribution box for housin/ covering extra wires 12 each 930.00

and cables suitable for followingsize of m.c.b. db box.

Three phase double 12way double door.

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 1Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K, Uniformity ratio >0.45, Luminaire efficacy>

93 100 lumens/watt . LED driver efficiency > 85 %.CREE 150.00 EACH 3907.00

/ OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. (

fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge -4KV,Light must have

440VAC line supply with over loltage protection. It

should withstand 48 hours for 440VAC line supply (i)

above 36 to 48 watts Cat.III

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 1Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K, Uniformity ratio >0.45, Luminaire efficacy>

94 100 lumens/watt . LED driver efficiency > 85 %.CREE 119.00 Ea. 5917.00

/ OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. (

fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge -4KV,Light must have

440VAC line supply with over loltage protection. It

should withstand 48 hours for 440VAC line supply (iv)

above 90 to 120 watts Cat.III

Supplying and erecting approved make

Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB Mounting,

stud type terminal and arrangement for cable

termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement.(G)

Mtr. Long 70 mm Top X 155 mm bottom dia,

mm thickness with 260mmX260mmX16mm base

plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts Approx Pole weight 84 kg

Providing and erecting Street Light pole bracket

comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B

Class G.I. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm /80mm / required size of

pole top having sufficient fasteners for fixing the

96 brackets and having spread of 1.5.mtr. length 79.00 EACH 798.00

with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] Single

Arm Bracket 1.5 Mtr

Providing 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size 60 x

60 x 120 cm. Deep in below ground level with plinth of

cm x 45 cm(or 45 cm dia x 45 cm) high upper ground

level with necessary curing and finishing in approved

manner. ( for 7.5 & 8/8.5 mtr pole)

S.I.T.C. submersible pump set suitable for bore of 100 mm.

dia. or more having three phase motor capacity not more

than 5 H.P. with following capacity . Lifting and Lowering

taken extra. (A) (25 stage) 120 to 125 LPM discharge at

to 120 mtrs. head respectively suitable for 50 mm dia.

Supplying and erecting Direct on line starter with 30 Amp.

(resistive @ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to

20 amp. Range C.T. Operated electronic overload relay in

engineering grade plastic enclosure for 3 ph 415v 50 HZ

A.C. motor up to 7.5 HP with high voltage protection

(above 480 v) and under voltage protection (below 330 v)

99 current sensing single phasing protection. Reverse 3.00 each 2532.00

phasing protection, inverse current characteristic

overload protection with indication for On, OL, HV,LV SPP

in a single unit with feather touch start / stop push button,

high temperature with standing Bakelite terminals

complete erected on P.W. Block with necessary

connection. [Cat.II]

Supplying & erecting in earthpit of minimum bore dia.

225mm size ASH or approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free G.I.Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with

100 constant ohmic value surrounded by highly conductive 12.00 each 12375.00

compound with high charge dissipation suitable for panel

earthing.[A] For electrical installation up to 440 V (c) For

Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing

in normal soil. Length of Pipe : 2.00 mtrs Back filling

Compound :2 nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device.

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component

for following Max. rating erected as directed. (ii) 40Amps.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be laid

104 on wall with necessary clamps or in existing trench / 25.00 RMT 2842.00

pipe at road crossing or floor of following size of

cables.(C) 3 1/2 core 50 Sq. mm ( 25 Sq. mm 1/2 core)

providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free

fire retardant insulated copper conductor, insulated wire

(HRFR) conforms to IS-694, erected in existing pipe with

1.5sq. mm copper conductor of same specifications for

earth continuity of following size. (a) 3 core 1.5 Sq. mm

106 -Do- 3 core 2.5 Sq. mm 50.00 RMT 101.00

107 -Do- 3 core 4.0 Sq. mm 50.00 RMT 139.00

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral

108 415V,50Hz. having characteristic of quick action & 2.00 EACH 4272.00

tripping with all advance feature & do not incorporate

any electronic component for following Max. rating

erected as directed. 100 Amps FP (100 mA Sensitivity)

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, 22 gauge copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum

6.85, Air delivery minimum 215 CMM, 350 RPM,230v

109 (tolerance as per IS : 374-2019), THD < 10%, remote 164.00 EACH 3323.00

or electronic regulator unit for Speed Control and all

remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit

with surge, over current and overload protection ,

Hz, Single phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in

Charge] B) 1400 mm sweep 56"

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube Light with

integral driver(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet cat III

Supplying & erecting approved make Four Pole 415V

Motorised Automatic transfer switch including controller

with UV/OV, phase sequence, single phasing and

frequency protection interior for panel mounting with

operating mechanism A.C.23A duty confirming to IS for (F

Providing and erecting busbar chamber confirming to IS-

375 fabricated from 16 G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket and necessary

busbar supports with Aluminium busbar having current

density not more than 0.8 Amp. / sq.mm (Rated current /

112 cross section area) duly wrapped with colour insulation 1.00 EACH 6720.00

tape for phase sequence, three phase & neutral each

Suitable for following current capacity with necessary

painting mounted on wall or pedestal frame of required

size with necessary connections.(D) Suitable for 400 Amp.

Providing and erecting Sheet Steel powder coated

Vertical MCB distribution board (VTPN) - flush /

surface mounted double door (IP54) fitted with

insulated copper busbar, isolated neutral link, earth

113 bar and DIN rail, confirming to IS 13032 and BS 5486- 1.00 EACH 18480.00

1986,IP-54 suitable for 250 AMP TPN MCCB +

RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company

of MCB to be used) (D) 12 way outgoing

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

114 high pressure tool & connected to switchgear terminals 50.00 EACH 8.00

with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm for 2.5sqmm

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

115 high pressure tool & connected to switchgear terminals 50.00 EACH 10.00

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 sq.mm

Supply, Installation, testing and commissioning of

Computer System with UPS system for Surveillance and

Monitoring - Pentium Core i5 with up to 4.70Ghz CPU

speed, minimum of 8 GB RAM, up to 24MB cache,

116 52X32X52X CDRW Drive & 2TB HDD, optical Mouse, 106 1.00 EACH 40000.00

keys keyboard,Mouse, 2 nos. 10/100 Mbps Ethernet card

,USB connection & internal modem, 17" colour graphics TFT

monitor & Original Windows 11 and anti-virus software

loaded. (Dell/Lenovo/HP)

SITC of 4 Megapixel up to 20 meter IR IP66 ,Varifocal

,Water Proof outdoor type Bullet IP netwrok Camera : Up to

4 megapixel high resolution Full HD1080p video Dual

stream with 4mm lens - 3D Digital Noise Reduction3-axis

adjustment DC12V Support H.265+ with all required

Supply, Installation, Testing & Commissioning of 16 port

Supply, Installation, Testing & Commissioning of 24 CH port

Supply, Installation,Testing & Commissioning of 16 TB Hard

Supply, Installation,Testing & Commissioning of 4U Rack

With Required Accessory. Outdoor or Indoor

Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C] CAT -

123 Supply and Installation of HDMI CABEL. 25.00 RMT 120.00

124 Junction box for CCTV Camera 121.00 nos 275.00

Point wiring for independent PLUG with following size

mains earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires upto 10 mt length, in following below of pipe

erected complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity

connection erected on Metal / PVC/Wooden box

covered with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet. [C] 6/16A Plug and 16 A switch

with 2-4 sq.mm Cu. Mains with 2.5 sq.mm ( green) earthing

wire(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

Providing and erecting Inverter based approved make

split air-conditioning unit consisting of condensing unit

with variable speed fan motor, inverter type hermetically

sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and

126 blower motor with its accessories by means of extra 3.00 each 66500.00

supplied proper insulated copper tubing,drain PVC pipes

suitable for ( cost includes Eco Friendly green gas

charging and 15A plug top & Remote Control & MS Stand)

with necessary core cutting.(2)For 4/5 Star Rating of

current year(C) for 1.7 to 2 ton capacity

Add Labor Cess 0.01