Repair and renovation of OSCSC Godown at Jharbandh,RMC Padampur

Removing of old cement Plaster from walls including racking out jointing 12mm deep and removing the debris with in 50m lead.

Dismantaling of Brick masonary in cement mortar above 3mt. Height including stacking the useful materials for reuse and removing the debris within 50m lead.

Dismantling G.C.I or A.C sheet roofing after carefully removing nut & bolt including stacking of materials for re-use & removing the debris with in 50 mt lead.

Dismantling and removing Doors, windows and ventilators including removal of frames,hinges fastering and stacking the same for reuse & removing the debris with in 50mt lead etc.

Dismantling & removing cement concrete including the useful materials for reuse & removing the debris with in 50 mt lead.

Flyash Brick masonary in Superstructure in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height.

Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Above 3 mt height.

Providing and lying plain cement concrete of proportion (1:3:6) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance, royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C

Providing and lying plain cement concrete of proportion (1:2:4) using approved quality cement , 20 mm.down graded size black hard crusher broken granite stone chips and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Providing and Finishing walls with water proofing cement paint of approved shade on new work Two coat to give an even shade per up to 3.00mt.

Providing and Finishing walls with water proofing cement paint of approved shade on new work Two coat to give an even shade per above 3.00mt.

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor).

Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Above 3 mt height. (first floor).

Supplying, fitting ,fixing of M.S.Grill with shutter in doors/ windows/ventilator /gate etc including all cost of materials, labourer,T & P ,taxes etc complete as directed by the Engineer-in-charge .

Polishing/Painting 2 coats with approved synthetic enamel paint on steel/wood work to give an even shade including cost of all materials, labourer, sundries, T & P etc complete as directed by the Engineer-in-charge

Supplying & fitting fixing of precotated Galvanized iron profile sheet semi gloss of total coated thickness 0.50 mm in roof drilling holes in wind ties including fixing of ridges vallyes,wind ties with all cost of J/L Hooks etc.complete as per direction Engineer- In- Charge.

Manufacturing supplying M.S Angular truss, including fabrication and & fixing in position including all cost etc as per direction of Engineer-in-charge. complete.

Manufacturing supplying (50mm X 100mm X 50mm) 5mm C chhanel purlin,runner and Fender to plinth band (Angular) including fabrication and & fixing in position including all cost etc as per direction of Engineer-in-charge. complete.

Please Enable Macros to View BoQ information