ARC work of FABRICATION FROM RAW MATERIALS OF MILD STEEL in the jurisdiction of KIM ind Division. Through outsourced agency for existing DGVCL Network for SDN under Kim Division.

LABOUR RATES FOR FABRICATION FROM RAW MATERIALS OF MILD STEEL

FY 2025-26 & FY 2026-2027 (WITHOUT GST)

ARC work of FABRICATION FROM RAW MATERIALS OF MILD STEEL in the jurisdiction of

KIM ind Division. Through outsourced agency for existing DGVCL Network for SDN under

Fabrication of Anchor Rod from 16 SQ.mm MS

9910000049/ Raoundbar & 65 mm x 65 mm x 6 mm / 50 mm x 50 mm x

9910000050 6 mm M.S. angle as per approved drawing and

requirement of the company.

Fabrication of Eye Bolt from 16 SQ.mm MS Raoundbar

63 9910000015 with supplying of 2 (two) nuts of suitable size as per No.

approved drawing and requirement of the company.

Fabrication of Turn Buckle from 16 SQ.mm MS

9910000028/ Raoundbar & 65 mm x 65 mm x 6 mm / 50 mm x 50 mm x

9910000016 6 mm M.S. angle as per approved drawing and

requirement of the company.

Fabrication of 11' (feet) long Top/Bottom/D.O. angle from

65 9910000030 65 mm x 65 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 9' (feet) long Top/Bottom/D.O. angle from

66 9910000031 65 mm x 65 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 4'6" (feet) long Tapping / bracing angle

67 9910000003 from 65 mm x 65 mm x 6 mm M.S. angle as per No.

approved drawing and requirement of the company.

Fabrication of 2'3" (feet) long bracing/ support angle from

68 9910000039 65 mm x 65 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 11KV HT 'V' Cross Arm from 65 mm x

69 9910000021 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

File No: DGVCLDOKI/TEN/e-file/6817/2026/0689/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0218/02/2026 Approved Date: 09-02-2026

Fabrication of 11KV HT Top fitting from 65 mm x 65 mm

70 9910000022 x 6 mm M.S. angle and 50mm x 6 mm M.S. flat as per No.

approved drawing and requirement of the company.

Fabrication of 22KV HT Top fitting from 65 mm x 65 mm

71 9910000055 x 6 mm M.S. angle and 50mm x 6 mm M.S. flat as per No.

approved drawing and requirement of the company.

Fabrication of 22KV HT 'V' Cross Arm from 65 mm x

72 9910000037 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of Guy Clamp pair suitable for PSC pole from

73 9910000041 50mm x 6 mm M.S. flat as per approved drawing and PAIR

requirement of the company.

Fabrication of 'U' Clamp from 50mm x 6 mm M.S. flat

74 9910000024 as per approved drawing and requirement of the No.

Fabrication of 'C' clamp suitable for PSC pole from

75 9910000043 50mm x 6 mm M.S. flat as per approved drawing and No.

requirement of the company.

Fabrication of 'C' clamp suitable for RSJ GIRDER pole

76 9910000044 from 50mm x 6 mm M.S. flat as per approved drawing No.

and requirement of the company.

Fabrication of Three hole patti from 50mm x 6 mm

77 9910000056 M.S. flat as per approved drawing and requirement of the No.

Fabrication of 11' (feet) long Top/Bottom channel from

78 9910000061 100 mm x 50 mm x 5 mm M.S. channel as per approved No.

drawing and requirement of the company.

Fabrication of 9' (feet) long Top/Bottom channel from

79 9910000060 mm x 50 mm x 5 mm M.S. channel as per approved No.

drawing and requirement of the company.

Fabrication of 11'(feet) long angle bracing from 50 mm x

80 9910000035 50 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of 9'(feet) long angle bracing from 50 mm x

81 9910000034 50 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of 11' (feet) long channel welded from

82 9910000062 assorted length of scrap channel as per approved and No.

requirement of the company

File No: DGVCLDOKI/TEN/e-file/6817/2026/0689/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0218/02/2026 Approved Date: 09-02-2026

Fabrication of 9' (feet) long channel welded from assorted

83 9910000063 length of scrap channel as per approved and requirement No.

Fabrication of Guy Clamp pair suitable for 10 mtr PSC

84 9910000072 pole from 50mm x 6 mm M.S. flat as per approved PAIR

drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for 9/11mtr RSJ

85 9910000073 GIRDER pole from 50mm x 6 mm M.S. flat as per PAIR

approved drawing and requirement of the company.

Fabrication of 5' (feet) long Tapping angle from 65 mm x

86 9910000066 65 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of H.T. Ext'n suitable for 22KV system from

87 9910000067 x 65 x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of H.T. Ext'n suitable for 11KV system from

88 9910000068 x 65 x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of 750 mm long Channel for HT AB conductor

89 9910000069 from 100mm x 50mm x 5mm M.S. Channel as per No.

approved drawing and requirement of the company.

Fabrication of 22KV HT "V" Cross Arm from 100mm x

90 9910000070 50mm x 5mm M.S. Channel as per approved drawing and No.

requirement of the company.

Painting of steel fabricated material of RSJ DO DP

structure with paint

Painting of steel fabricated material of RSJ pole mounted

transformer double pole structure with paint

Painting of steel fabricated material of RSJ single pole

painting of steel fabricated material of PSC Single pole

(HT line) with paint

File No: DGVCLDOKI/TEN/e-file/6817/2026/0689/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0218/02/2026 Approved Date: 09-02-2026

95 9924000031 painting of steel fabricated material of PSC DO DP double No.

pole with paint

painting of steel fabricated material of PSC double pole at

pole mounted transformer with paint

Note: Total Estimated Cost of Schedule B

Total Work Order Amount with Schedule B

1.DGVCL will provide key material like M.S. materials,ABC/Bare

conductors,PSC/RSJ Poles,Insulators,Fabricated

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL

approved drawing and by welding rods confirming to the relevent

ISI specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be

provided by DGVCL on payment of required charge for

connection & electricity bill of the same shall be paid by the

4.All the rates are inclusive of PF & Exclusive of GST

applicable time to time.

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the

paints on to the RSJ poles & steel fabricated materials of

RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be

properly painted for the RSJ poles & steel fabricated materials of

(c) Two coats of approved ISI mark silver paint (i.e. triple

mangoes or equivalent quality silver paint) is to be properly

painted on to the RSJ poles & steel fabricated materials of

File No: DGVCLDOKI/TEN/e-file/6817/2026/0689/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI