Construction of 10 Mtr. Shooting Range at MNSS Rai Distt. Sonipat (Pdg. CCTV, Fire Alarm and PA System) Recall

Amount

SITC of Micro processor based 2 wire fault tolerant, networkable type Fire Alarm / Detection Control Panel (having nos. of loops to suit minimum 20% extra over the nos. of fire detectors. The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 characters LCD unit/ 5.7’’TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet Steel power coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80 LED Indicators. The Panel shall have 3 Serial Ports. The pane\l shall have a built in power supply and battery charger along with maintenance free 24 AH,2 x 12 volt SMF lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required. And conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS/ as per specifications complete in all respect up to the entire satisfaction of Engineer-in –charge of work. Make: Bosch FPA 1000 / Cerberus by siements/ Edwards EST3/Honeywell Morley Zxe series

SITC of Analog Addressable type Active Repeater fire alarm panel with Backlit LCD Display, having controls for reset, mute, Accept, Silence alarms and self test conforming to BS5839 standards and Duly approved by EN54/UN54/VDS with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer – in Charge of work. Makes :(Makes: BOSCH FMR-1000-RCMD, Cerberus by Siemens ,Morley ZXRA , Edwards 3-LCD ANN)

SITC of addressable multisensor detector with a combination of optical and thermal including base, auto addressing features as required. Detectors should have 2 as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elemnets in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance wiht EFSG agreement EFSG/F/97/005. EMC safety for detector shall be 50 V/m. shall be EN54/VDS/UL certification. ((Detectors without inbuilt isolators may be considered with an additional isolator module after 20 devices) Make: Bosch FAP-440+T+FAA-440, Siemens Cerberus OH921+DB-11, Honeywell Morley HM-PTSE+B501, Edwards SIGA PHD+SIGA

SITC of addressable Heat Detector wht fixed and rate of raise feature including mounting base with LED etc complete as required. Each detector should have 2 as per NFPA 72 style 7 wiring requirement (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to eletrmagnetic effects in accordance with EFSG agreement EFSG/F/97/005. Detector should monitor electromagnetic interfarence and report to the panel-current and average values, EMC safety for detector shall be 50 V/m. shall be EN54/VDS/U: certification. (Detectors without inbuilt isoaltors may be considered with an additional isolator module per detector. (Make: Bosch FAH-440+FAA-440, Siemensr Cerberus HI921+DB-11, Honeywell Morley MI-RHSE+B501, Edwards SIGA DHI+SIGA

SITC of UL/EN54/LPCB listed and FM approved line isloating for isolation the section of circuit in case of short in the addressable loop wiring (Make: Bosch / Siemens Cerberus/ Morley / Edwards

SITC of intelligent analog addressable type Manual Call point having surface or flush mounting option fully compliant to EN54 having rotary decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect upto the entire satisfaction of Engineer-in-Chage of the work. Make Siemens cerberus/ Morely/ Edwards

SITC of addressable Loop powered hooter with strobe complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required complete the ob in all respect upto the entire satisfaction of Engineer - in - charge of work. Make: Bosch/ Siemens Cerberus/ Morley/ Edward.

SITC of Glow Type EXIT Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink sulphate as bare chemical class 1 material PSPA fixed on 3mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener Make GLOLITE / PEARL / OMEX

SITC of Addressable Control Relay Module with flexible network structures with a maximun switching current of 1A @ 30V DC. Shall be EN54/UL/VDS Certification Makes :Bosch /Siemens Cerberus / Morley / Edwards

SITC of Intelligent Analog Addressable Type Monitor Modules having option of RAIL or Surface Mounting with Tri Color LED status indicator with Built in Short Circuit Isolators having Visible Rotary Decade Address Switch from 01-99 dully approved to GEA GEW1-082 conforming to BS5839 Standards and Duly approved by EN54/LPCB/VDS with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. (Makes: Bosch- FLM - 325 - 214, Siemens cerberus HTRI-M,Morley MI-DMMI, Edwards EST3

SITC of minimum 1000 Mtr. Range Kheraj / National make SIRON generator provided at the roof of the building with separate Power SITC, relay.

(HSR 31.40) Supply and erection of 1.5sqmm PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Havells /Polycab/Finolex

HSR (31.44) SITC of PVC conduit pipe 25mm dia ISI marked (medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer -in-charge of the work. Make: BEC, AKG, Kalinga / Diplast

SITC of 1 KVA online UPS with external SMF batteries 12V fo suitable AH battery for minimum 2 hour backup Make Microtek / Lumnious / APC Libert.

Supply, Installation, Testing & Commissioning of Public Address speakers wall mounted 6 watt of make Bosch / Honeywell / Heinrich.

Supply, Installation, Testing & Commissioning of Public Address speakers Ceiling mounted 6 watt of make Bosch / Honeywell / Heinrich.

CCTV HSR 31.44 Supply and erection of 25mm dia PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material requiredto complete the job in all respect to the entiresatisfaction of Engineer-in-Charge of work.

HSR 31.80 S/E/T/C of Cat-6 cable in existing PVC conduit /PVC channel complete in all respect with all labour and material required to complete the job in all respect.

SITC of Dome Camera lmage device/ Sensor - 1/3" Progressive Scan CCD / Progressive Scan CMOS or Better Resolution - 2 Megapixel (1920 x 1080) or better Frame rate Up to 30 fps or better Lens Type - 3 to 9 mm auto varifocal lens Motorized IR Light & Distance - Ir Range upto 30 mtrs or better Signal to Noise Raio - >50db Minimum lllumination - 0.3Lx Color; lR LED ON 0 .0 Lux or better Day Night - Auto Day/Night with switchable IR cut filter Video Compression - H.265,H.264,M-JPEG Camera should have Multiple Streaming- Min. Triple Edge Based Analytics. Storage - SD Card slot should be expandable up to 128 GB System Compatibitity - ONVlF Profite S&G Privacy Masking - Minimum 4 Privacy zones or higher Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, DDNS Additional Features Noise Reduction - Digitat Noise Reduction on/off. WDR -120dB WDR Atarm Input/Output - 1 Alarm Input, 1 ALarm OutPut Audio Input/Output - 1 audio input/1 audio output Environment Operating Environment – lndoor/ Outdoor Operating Temperature -0C to 50 c lngress protection & vandaI resident standards - lP66 or better and IK10 or better Certificates: UL, FCC, EN Approved makes Axis / Bosch / Pelco /Sony.

SITC of Bullet Camera lmage device/ Sensor - 1/3" Progressive Scan CCD / Progressive Scan CMOS or Better Resolution - 2 Megapixel (1920 x 1080) or better Frame rate Up to 30 fps or better Lens Type - 3 to 9 mm auto varifocal lens Motorized IR Light & Distance - Ir Range upto 30 mtrs or better Signal to Noise Raio - >50db Minimum lllumination - 0.3Lx Color; lR LED ON 0 .0 Lux or better Day Night - Auto Day/Night with switchable IR cut filter Video Compression - H.265,H.264,M-JPEG Camera should have Multiple Streaming- Min. Triple Edge Based Analytics. Storage - SD Card slot should be expandable up to 128 GB System Compatibitity - ONVlF Profite S&G Privacy Masking - Minimum 4 Privacy zones or higher Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, DDNS Additional Features Noise Reduction - Digitat Noise Reduction on/off. WDR -120dB WDR Atarm Input/Output - 1 Alarm Input, 1 Alarm OutPut Audio Input/Output - 1 audio input/1 audio output Environment Operating Environment – lndoor/ Outdoor Operating Temperature -0C to 50 c lngress protection & vandaI resident standards - lP66 or better and IK10 or better Certificates: UL, FCC, EN Approved makes Axis / Bosch / Pelco /Sony.

SITC of IP IR PTZ Dome Camera PoE Enabled (High Definition) lmage device/Sensor - 1/3" Progressive Scan CCD/ Progressive scan CMOS or better Resotution - 2 Megapixel, 1080p (1920x1080) or better Optical Zoom 30X & Digital Zoom: 12X lR Light & Distance - lR range up to 150 Mtrs. Or better Signal to Noise Ratio - >_50 dB (AGC OFF ) PAN & Tilt travel - Pan 360 endless Tilt 0 to -90 (Auto Flip) Minimum lIIumination - 0.3Lx Color and B/W 0.01Lx Day Night - Auto Day/Night with Auto lR-CUT fitter with auto switch Encoding Video Compression - H.265 MJPEG Triple Stream encoding Frame Rate - Main Frame 30 FPS in all resolution or better Audio Compression - G.711/G.726 Edge Based Analytics Storage - SD Card shoutd be expandabte up to 128 GB Protocols - lPv4/lPv6, TCP/lP, UDP, RTP,RTSP, HTTP, HTTPS, ICMP,SMTP, NTP, DHCP, UPnP, IGMP,SNMP,IEEE 802.1 X System Compatibitity - ONVlF Profite S & G Privacy Zone - Minimum 4 Privacy zones or higher Additional Features Noise Reduction-Digitat Noise Reduction on/off. WDR -90dB True WDR or better Alarm Input,/ Alarm Output-1 Alarm Input, 1 Alarm Output Audio Input,/ Audio Output-1 Audio Input, 1 Audio Output Environment- Operating Environment-Outdoor Operating Temperature- 0'C to 50'C lngress protection lP66 or better. Certificates: UL, FCC, EN Approved makes Axis / Bosch / Pelco /Sony.

Supply, Installation, Testing and comissioning of Network video recorder With 24 TB HD to a maximum of 32 IP cameras,The recorders can be installed with a maximum of 4 internal HDDs for video storage. Option of a 2 HDDs for storage, plus a DVD burner for video export. Max. capacity per HDD: 6 TB. 1 no. E-SATA supported. The recorders comes with a built-in PoE+ switch as an option. 16 alarm i/p & 6 relay o/p. Simultaneous 1/4/9/16 channels playback. H.265/H.264/MJPEG supported. iPhone/Android support. Maximum incoming bandwidth of 320 Mbps. Maximum recording bandwidth of 320 Mbps. 1 I/O for audio. 1 VGA & 2 HDMI outputs. CE, UL & FCC certified Make Pelco/Honeywell / Bosch / Axis.

SITC of Layer-2 POE plus Gigabit Ethernet 1RU chassis with 24 PoE 10/100/1000 BaseT ports and 4 Gigabit SFP ports. Includes an internal AC power supply 370W atleast or higher power budget) with a power cord, manuals access card, and RJ-45 to DB-9 adaptor.The Access Switch should have 4 ports of 1 G SFP.The Access Switch should provide Non-Blocking switch fabric capacity of 56 Gbps or more. L-2 switch should provide wire-speed packet forwarding of 41 Mpps or more. L-2 Switch should support min 16K MAC addresses and min 4000 active VLANs. Make:Cisco/Alcatel/Zyxel/Juniper

SITC of Layer-2 POE plus Gigabit Ethernet 1RU chassis with 16 PoE 10/100/1000 BaseT ports and 4 Gigabit SFP ports. Includes an internal AC power supply 370W atleast or higher power budget) with a power cord, manuals access card, and RJ-45 to DB-9 adaptor.The Access Switch should have 4 ports of 1 G SFP.The Access Switch should provide Non-Blocking switch fabric capacity of 56 Gbps or more. L-2 switch should provide wire-speed packet forwarding of 41 Mpps or more. L-2 Switch should support min 16K MAC addresses and min 4000 active VLANs. Make:Cisco/Alcatel/Zyxel/Juniper

Supply, Installation, Testing and comissioning of 17U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per thespecifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Makes: Valrack /Netrack/ Comrack

Supply Installation Testing & Commissioning of 43" LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, Make: Sony/Panasonic/Samsung

SITC of 2 KVA UPS Overvoltage cut-off device (OVCD),Support for up to 160 AH external battery cabinets, Generator Compatible with Wide Input. Wide Input Voltage window (110 – 280Vac) for Indian Environmental Condition and for Optimized Battery Performance. UPS would support SNMP Mnagaer and web browser On Line With 1 hour Backup MAKE APC/ LIBERT EINOVA/Emerson

SITC of 3 Core Power Cable 1.5 sqmm. Make: Finolex/Polycab/Havells