Restoration of rain Damages of WSS Binwa in Tehsil Baijnath District Kangra HP

Excavation in foundations, trenches etc. in earth work , lift upto 1.50 metre stacking the excavated soil not more than 3 metres clear from the edge of excavation & returning the stacking soil in 15 cm. layers, when required into plinths sides of foundations etc. conslidating each deposing of all surplus excavated earth as directed within a lead of 20 metres complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Providing and laying cement concrete 1:4:8 (One cement is to four sand is to eight graded stone aggregate 40 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12)One cement is to six sand is to twelve graded stone aggregate 20 milimetre nominal size) in cement mortar 1:6 (One cement is to six sand) in breast wall/retaining walls complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Providing form work with steel plates 3.15 milimetre thick welded with angle iron in frame 30x30x5 milimetre so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens ballies,height of propping and centring below supporting floor two ceiling not exceeding 4 metre and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

Vertical surfaces such as walls(any thickness)partitions walls and the like including attached pillasters,buttreses plinth string courses and the like complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (One cement is to four sand) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge (2nd Class brick ).

15 milimetre(fifteen milimetre) thick cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises internal rounded angles chamfers and/or rounded angles not exceeding 80 milimetre in girth and finished even and smooth in cement mortar 1:6 (One cement is to six sand) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Steel work welded in built up sections, trusses, and framed work including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint in grating, framed guards bars, Ladders, railings, brackets and similar works complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Finishing wall with water proofing cement paint of approved brand & manufacture & required shade on undecorated wall surface ( two coat) to give an even shade on undercorated wall surface (two coat) to give an even shade after thotoodhly brushing the surface to remove all dirt & remains of loose powdered materials complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Hirmachi colour was on undecorated wall surface (Two coats) to give an even shade including thoroughly brushing the surface to remove all dirt and dust, mortar drops and other foreign matter complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Applying a Priming coat over new steel and steel and other metalled surfaces & i/c preparing the surface by thoroughty cleaning oil, grease & durt & other foreing matter scoured with wire brushes fine steel wool srapers & sand paper complete. (with ready mixed priming paint brushing red lead, red- oxide / zinc oxide chrome ) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Painting two coat (excluding priming coat ) on steel and steel and other metalled surfaces with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign dirt/matter with white ready mixed paint other than white complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .