SPL REPAIR TO BLDG NO T-12, T-13,T-90, T-91 AND T-39 AT PATTAN UNDER GE 969 EWS

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F, Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Dismantling of timber scantlings 40 sqcm and over in section in any position unframed work, complete all as specified and as directed.

S&F, in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position to replace old and decayed timber, complete all as specified and as directed.

S&F, Softwood 2nd class Clean sawn with butt joints eaves boards 20 mm thick, complete all as specified and as directed.

M&L for Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed.

Dismantling of timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed.

M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section, complete all as specified and as directed.

M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section, complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness inlcuding cover fillets, complete all as specified and as directed.

M&L for 6mm thick Plywood in wall, grade BWR,type BB, fixed with screws to timber frame work, complete all as specified and as directed.

M&L for 6mm thick Plywood in ceiling, grade BWR,type BB, fixed with screws to timber frame work in repair, complete all as specified and as directed.

M&L for 4 mm thick veneered decorative plywood ,grade 1 (with BWR resin) with decorative face veneers on one faces,in wall fixed with screws to timber frame work, complete all as specified and as directed.

M&L for 4mm thick veneered decorative plywood ,grade 1 (with BWR resin) with decorative face veneers on one faces,in ceiling fixed with screws to timber frame work, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exceed 1.50 sqm, complete all as specified and as directed.

S&F,Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats Of windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(b) complete all as specified and as directed.

S&F, Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed.

S&F, M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F, Aluminium handles 100 mm , cast type,anodised complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exceed 1.5 Sqm and not exceed 4.00 sqm, complete all as specified and as directed.

S&F, Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed.

S&F, 2nd class 35 mm soft wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut nd mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F, Aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed, complete all as specified and as directed.

S&F, Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F, Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F, M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F, Aluminium handles 150 mm , cast type,anodised complete all as specified and as directed.

Preparation of new previously untreated steel surfaces of any despcription, over 10 cm width or girth, otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

M&L for Preparation of old wooden surface of any description and two coat of synthetic enamel paint, not otherwise described,over 10cm width or girth incl complete removal, complete all as specified and as directed.

M&L for preparation of new wooden surface of any description and two coat of synthetic enamel paint over one coat of zinc chrome primer, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Dismantling timber scantlings 40 sqcm and over in section in any position unframed work complete all as specified and as directed.

S&F,, 2nd class softwood in scantling clean swan timber framed and fixed to the position, complete all as specified and as directed.

Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 25 mm thickness Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring, complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement, complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed

Preparing old plastered surfaces or unplastered surface of walls and applying three coat of cement base paint over a coat of primer with alkali resistant priming paint with complete removal of existing paint, complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

S&F, floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed.

S&F, powder coated aluminium window andventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, lazing clips, rubber packing, anodised aluminium snap beading, crews, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.), complete all as specified and as directed.

S&F, Sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane complete all as specified and as directed.

S&F, Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

S&F, 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F, of Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. Complete all as specified and as directed.

M&L for 100 mm thickness Cement concrete type D2, 1:4:8 (40mm graded aggregate) as in flooring, complete all as specified and as directed.

M&L for 40 mm thickness Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring, complete all as specified and as directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm with screed bed or bedding layer of CM (1:4) 15 mm thick for laying floor finishes, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for 75 mm thick cement concrete in 1:2:4 type B-1 using 20mm graded aggregate in plinth protection complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc, complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqmm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor, complete all as specified and as directed.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor, complete all as specified and as directed.

S&F, switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and directed.

S&F, switch piano Flush type, single pole, one way 15 amp 240 volts, complete all as specified and directed.

S&F, Socket outlet 2 in 1, 3 pin, 5 Amps flush type complete with gang box, complete all as specified and as directed.

S&F, Socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type complet with gang box, complete all as specified and as directed.

S&F, ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed.

S&F, in repairs Distribution Board, SPN 4 Way, Double door complete all as specified and as directed.

S&F, in repairs Distribution Board, SPN 8 Way, Double door complete all as specified and as directed.

S&F, in repairs MCB, DP 40 Amps 240 Volts B curve, complete all as specified and as directed.

S&F, in repairs MCB, SP 6-32 Amps 240 Volts B curve, complete all as specified and as directed.

S&F, LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose. complete all as specified and as specified and as directed.

S&F, LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing LED Bulb 12 Watt 220V suitable size from ceiling rose, complete all as specified.

S&F, LED light fitting mirror type with high output diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor , complete all as specified and as directed.

S&F, Lamp Holder,PVC/ polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F, stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, complete all as specified and as directed.

S&F, exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specfied and as directed.

M&L for sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc, complete all as specified and as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers complete including, flexible chord of 24 / 0.20mm with necessary connector (for blade / body) as required after rewinding Complete all as specified and as directed. Note : Spares used and rewinding shall be measured and paid seperatly under relevant item.

S&F, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 core, complete all as specified and as directed.

S&F in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan, complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Note:- Schedule of credit Rs 2,36,868.000 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

MS DUTTA BUILDERS (BID ID -3280214)

M/S MANZOOR AHMAD YATOO (BID ID -3280456)

M/S NISAR AND CO (BID ID -3280114)

M/S GASSI BROTHERS (BID ID -3280511)

M/S HAJI MOHD ASHRAF SUMJI (BID ID -3280378)

ANUSHA ENTERPRISES (BID ID -3280180)