Model School Campus At Village Agiya (Pro. Concertina coil fencing around Campus) Taluka : Khedbrahma District : Sabarkantha

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

1 Providing and fixing high-security concertina 1200.00 656.50 Rmt

coil fencing (600mm diameter) atop

compound walls up to 3m height, featuring

punched tape R.B.T. with a 2.5mm thick

spring core and 0.5mm thick blades (12mm

size). The installation shall include "Y" type

MS angle posts (40mm x 40mm x 6mm) or

modification of existing 50mm x 50mm x

5mm angle iron as directed, spaced at 3.05m

c/c and securely fixed. The fencing shall be

reinforced with four lines of horizontal R.B.T.

reinforced barbed wire (3mm) on each side

of the "Y" angle, totaling 4 lines where

applicable, and secured using G.I. staples,

G.I. clips, or "U" pins. The concertina coil

must maintain a density of 50 rounds per 6-

meter length (approximately 1kg covering

0.80 RMT) and a tape weight of

gm/meter. The rate shall be inclusive of all

necessary bolts, G.I. tying wire, grouting of

posts, labor, and materials required for a

complete installation at ESR M4/Intake Well

locations, all as per the directions of the

Engineer-in-charge.

2 Providing and casting in situ ordinary cement 36.00 4228.82 Cum

concrete M-200 for coping, over riding

returns including formwork curing and

finishing complete.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

3 Providing TMT Bar FE 500D reinforcement 2880.00 77.29 Kg.

for R.C.C. work including bending, binding

and placing in position complete upto floor

two level.

Total Rs.

Rupees Eleven Lakh SixtyTwo Thousand Six Hundred ThirtyTwo and Paisa SeventyTwo Only

I / We am / are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rate mentioned above. Amount of my /

our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct_________% Below Add_________% Above

Net Rs.__________________ Net Rs.__________________

In words __________________ In words __________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Khedbrahma Himatnagar