JJM Sekerkote

Amount

(Supply & Erection)

Erection of 9 mtrs length of Steel Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect.

Laying & Stringing of 1KM (Single Conductor) ACSR 6/1/2.59 mm dia 'WEASEL' including hoisting & binding etc. Complete as required.

Laying & strining of 1KM (Single Conductor) , 10/8SWG GI wire including hoisting & binding etc. Complete as required.

Erection of 11KV protective Guarding by GI wire 8 SWG as per technical specification,across road/River/ Telecom line etc. in horizonta formation complete .

Erection of 11KV Pin insulator along with Pin.

Erection of 11KV Single Disc insulator set along with necessary fittings.

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Erection of 9 KV,5 KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification.

Erection of M.S.Channel Cross-Arm,0.3 to 1.2 Mtr. Long75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,1.3 to 2.8 Mtr. Long75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,0.6 to 2.8 Mtr. Long100 x50 x 50 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm,1.0 to 2.8 Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Installation / Positioning of 11/0.430 KV,3-Phase 63KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Febrication of Cross-Arms by MS Channel/MS Angle as per specification

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Trench Size: Width-350mm, Hieght-1200mm / Sand (couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks Upto 120 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required,Upto 120 sq. mm

Manually digging /drilling horizontally or diagonali direction for road crossing / Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 1100mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering In Charge.

Laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (120 cm deepth)and re-filling etc as require

Providing of Pre-cast cement concretecable identification route marker (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker shall be embossed "DANGERS: TSECL, ELECTRIC POWER CABLE" with Black colour letter(both side). The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

Providing Three Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35mtr. in length supported by G.I.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required .

Grouting of steel tubuler poles /stay set with CC of ratio 1:2:4(1 cement : 2 river sand : 4 Jhama brick aggregate of 20 mm nominal size)i/c supply of cement,sandand brick aggregate20 mm nominal size complete with excavation, refilling of earth ,ramming alonf with centeringand shutteringaas required @ 0.273 CUM per Steel tubuler pole & & 0.119 Cum/stay sets per TSECL specification,9 Mtr. long S.T Pole(0.273X15=4.095 CUM)

Earthing with G.I pipe 2.5mtr. Long and 40mm dia including excavation, refilling with alternate layer of salt & Charcoal as per drawing including supply of G.I.Pipe, Salt & Charcoal, GI wire, nuts &bolts, etc. as required.

Carriage of 9.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required b) Beyond 25 KM upto the lead of 50KM,ii) Beyond 8 (eight) poles

Carrying of the store materials from Electrical Store Sub-Division, AD Nagar, Agartala to ESD- Sekerkote storeyard by mechanical transport i/c loading unloading & stacking etc. Upto the lead of 25 KM

Carriage of materials such as Cable,AAC, AAAC, ACSR, G.I.Wire,Cross-Arm,Stay Set,Insulators etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25KM & 50KM. Upto the lead range 25KM

Carriage of G.O.S, D.O.F,L.A,etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required,Upto the lead range 25KM

Carriage of 11/0.430, 3-Phase 63KVA by Mechanical Transport from the Site /Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required,Beyond 25 KM upto the lead of 50KM

Cartage of Power Cable from TSECL store or Stack sites by Mechanical Transport including loading, unloding and stacking/positioning by mannual mode up to work site: (Cost including cable drum Lifting Jack, removing of cable from Drum, coiling of removed cable etc.)Weight of 3-Core, 6.35/11kV XLPE Cable, Flat Strip (Kg/Km):35sqmm(2350Kg),50sqmm(2700Kg),70sqmm(3100Kg), 95sqmm(3700Kg),120sqmm(4200Kg),35sqmm to 120sqmm

Supply of 11 KV XLPE Cable,3CX70 Sqmm.

Supply of 95 Sqmm Bimetalic Lugs

Supply of Wooden Plank(24"X10'X1.5"size)

Supply of Polythene Pipe 1/2" dia

Supply of Fabricated MS Bracket Clamp

Supply of Fabricated MS Stay Clamp

Supply of MS Nuts & Bolts ( assorted size)

Supply of Outdoor heat shrinkable cable jointing kit with lugs for 11 KV grade XLPE cable for 3 core 70 sq. mm.

Supply of HDPE Pipe 90 mm dia

Supply of G.I.Pipe,80 mm dia(Medium Class)