PROVN OF GEYSERS, EXHAUST FANS, CEILING FANS IN MD ACCN AND PROVN OF TOILET BLOCK NEAR MT GARAGES AT MIC and S UNDER GE (S) AHILYANAGAR

Amount

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and PVC casing caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch .

NOTES: (a) Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral-Black) (b) All points shall be earthed up to fixtures/ fittings (c) Any damages to wall/tiles occuring during fixing for point wiring shall be repaired/replaced by contractor to match with existing surface. The rate quoted deemed to be included for the same.

All as per serial item No. 1 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, Neutral and earth for one 16 Amp, 6 pin socket on independent board.

M&L for concealed point wiring complete with and including single core PVC insulated unsheathed flexible bright annealed multi stranded copper conductor FRLS cables 1.5 Sqmm 1100 volts grade conforming to IS 694 1990 drawn through and including heavy grade PVC rigid conduits not less than 20 mm dia as reqd at site, totally concealed in walls/floors/ceiling including all conduit accessories/ fittings/ junction boxes/ inspection covers etc; of heavy grade including 1.5 Sqmm 1100 V grade PVC insulated, unsheathed flexible multi stranded copper conductor FRLS cable as continuous earth wire connected to metallic bodies of luminaries/fans etc; at one end and to common earth dolly at other end, all as specified & as directed for light point or one fan point controlled by one, one way switch.

(Note: The unit rate quoted shall deeemed to be included cutting chases in walls for concealed wiring & making good disturbed surfaces . NOTES: (a) Proper colour coding shall be adopted for wiring (for phase-RED, YELLOW, BLUE for Earth-Green and Neutral-Black) (b) All points shall be earthed up to fittings. (c) Any damages to wall/tiles occuring during fixing for point wiring shall be repaired/replaced by contractor to match with existing surface. The rate quoted deemed to be included for the same.

All as per serial item No. 3 here in before but for one 6 Amp 5 pin socket outlet point on same board with other switches including earth wire.

All as per serial item No. 3 here in before but for one 6 Amp 5 pin socket outlet point on independent board.

S&F switch piano, flush button, 6 Amp, single pole, one way, 230 volts, white finish, complete all as specified & as directed.

S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish complete all as specified & as directed.

S&F switch socket combination, multi-purpose, flush type, 3 in 1 type (3 pin ) 6/16 Amps, 230V, AC, complete all as specified & as directed.

Supply and fix in replacement MCB SP, AC 240 V, 6 to 32 Amps 10 KA capacity ,'C' series making connection with suitable size of copper lugs etc complete all as specified and directed by engineer-in-charge.

Supply and fix in replacement MCB SPN, AC 240 V, 40 to 63 Amps 10 KA capacity ,'C' series making connection with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing ceiling fans complete with Aluminium blades, down rods, suitable for electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CMM, with min service value 7.90 cum/min/W, min 350 RPM, BEE Five star rated with Super enamelled copper wire,class B insulation, brushless direct current motor (BLDC) with out remote complete all as specified and as directed by Engineer-in-charge.

Supply, installing, connecting, testing and commissioning of electric water heater storage type capacity 25 Litres 5 star rated with inner body duly coated for superior corrosion resistance, heavy duty protective anode to protect the inner container from corrosion, Energy saving high density PUF insulation to keep hot water for longer time, precaliberated thermostat, safety valve, fire retardant power cord, Corrosion proof outer body, Colour changing LED indicator, Heavy duty heating element with rated voltage 2 KW, 230 volt, 50 Hz ,vertical type with ISI certification mark, installing on wall with suitable size bolts, nuts, etc and connecting up with hot and cold water connection and electric connections complete all as specified and as directed by Engineer-in-charge.

Supply & fix exhaust fans PVC body, AC single phase 230/ 240 V of size 250 mm sweep, min 1300 RPM, with min air delivery 750 CMH with louver, and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to exhaust fan complete and fixing on wall with necessary bolts, nuts , washers,etc complete all as specified and as directed by Engineer in Charge.

S&F heavy duty, metallic body with metallic blade & brackets, ISI marked exhaust fan, 300 mm sweep, min 1300 RPM, min air delivery 1050 CMH with louvers to prevent entry of mouse & birds and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to exhaust fan complete and fixing on wall with necessary bolts, nuts , washers,etc complete all as specified and as directed by Engineer in Charge.

S&F bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed. Make : Cat No. F1015151 of CERA or equivalent model of makes specified.

S & F stop/angle valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed. Cat No. F1015201 of CERA or equivalent model of makes specified.

S&F PVC Connection 15 mm size with PTMT nuts, 450 mm long, complete all as specified and as directed.

M & L for complete removal of existing treatment and applying 2 mm thick of birla white wall care putty to achieve smooth surface and applying two coat of Acrylic distemper of approved shade/tint over a coat of primer complete to match the existing surface complete all as specified and as directed. Note: This item will be executed only on distrubed surface of point wiring.

M&L for making hole on brick/block/stone masonry wall for fixing of exhaust fan of 250/300mm sweep and making good for disturbed surfaces with cement mortar 1:4 and applying two coats of acrylic distemper along with wall care putty of same colour to match the existing surface complete all as specified and as directed by Engineer in Charge.

M&L 15mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple,etc complete laid in walls /ceiling or laying in floor/trench or fixed to walls complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation, laying cables, etc and not exc 10 Sqm on plan and getting out in any kind of soil complete all as specified as directed.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Returning, filling in excavated material (soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and as directed.

Excavation over areas not exc 1.50 m deep and getting out in any type of soil complete all as specified and as directed.

Removing excavated material (soil) to a distance exc 250m but not exc 500m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed.

Supply and laying Double Walled Corrugated (DWC) HDPE pipe of nominal bore 50mm including 90 degree bends with coupler and rubber ring, conforming to IS :16205 Part 24 Type 450N, laid in trenches for cable protection complete, all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 10 Sqmm, 2 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning complete all as specified and as directed.

M&L for 25mm GI tubing medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and as directed.

M&L for 20mm GI tubing medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and as directed.

M&L for 25mm gun metal or bronze globe/gate valve, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed.

M&L for 20mm gun metal or bronze globe/gate valve, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed.

M&L for cutting/ drilling existing pipe line & taking branch connection complete including all necessary GI fittings, jointing materials, excavation and earth work etc complete all as specified and as directed.

S&F lamp holder, angle/ batten type, PVC / Polycarbonate type with back plate, suitable for batten fittings all as specified & as directed.

S&F decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient of capacity 20 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make : HAVELLS Cat No LHEXACP7IN1W020 or equivalent model of makes specified.

S&F MCB DB SPN 4 way, double door shutter type 240 volts, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting with 100 Amps rated copper busbar, with neutral bar, earthbar and cable alley for cable managment, fully shouldered, neutral bars, prefittes masking sheet complete all as specified and as directed.

Supply and fix MCB SP, AC 240 V, 6 to 32 Amps 10 KA capacity ,'C' series making connection with suitable size of copper lugs etc complete all as specified and directed by engineer-in-charge.

Supply and fix MCB SPN, AC 240 V, 32 Amps 10 KA capacity ,'C' series making connection with suitable size of copper lugs etc complete all as specified and directed by engineer-in-charge.

M&L in replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia, by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover

with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 m, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point including testing on completion complete all as specified and as directed.

S&F security light of building with single piece, new generation energy saving and environmental friendly long life LED 35W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of Light grade GI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clams made out of MSFI 40 mm x 5 mm and connect to nearest electric supply by three core 1.5 sqmm aluminium cable all as specified and as directed. Make : Havells Cat No ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent model of makes specified.

M&L for moorum filling in floors or paving, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hard core of gauge not exc. 63 mm, deposited spread and levelled in layers n. exc. 15cm thick, including watering and rammed etc. complete all as specified and as directed.

M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and as directed.

M&L for damp proof course 40mm thick in PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregates) mixed with integral water proofing compound conforming to IS-2645 to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan with mean radius exc 6m built in CM 1:6 complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floors and pavings complete all as specified and as directed.

M&L for reinforced cement concrete, M-25 Design mix (20mm graded stone aggregate) as in foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed.

M&L for reinforced cement concrete, M-25 Design mix (20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for reinforced cement concrete, M-25 Design mix (20mm graded stone aggregate) as in beams, cantilevers, bressummer lintel over 1.5m span complete all as specified and as directed.

M&L for reinforced cement concrete, M-25 Design mix (20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for Mild steel TMT bars 5mm and over upto and including 10mm dia in stirrups spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Use and waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions squre, rectangular or polygonal complete all as specified and as directed.

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

S&F mild steel ventilators Fixed type with glazing bars and guard bars complete all as specified and as directed.

S&F 3mm thick frosted/ figured glass, pin headed type and glazing with oil putty or beads in square including glazing pins, n.exc 0.50 sqm in each pane, of any description complete all as specified and as directed.

S&F SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and as directed.

M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of red oxide primer complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished surfaces even & smooth without using extra cement including a layer of sagol finish complete all as specified and as directed.

M&L for rendering 15mm thick wall plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces including finishing even & smooth without using extra cement complete all as specified.

M&L for rendering 5mm thick on ceiling surfaces in cement mortar 1:3 on fair faces of concrete surfaces including finishing even & smooth without using extra cement all as specified and as directed.

M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over one coat of alkali resistant primer all as specified and as directed.

M & L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for Preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L, for water proofing treatment to RCC roof slab, including parapet, comprising with the following courses of treatment/specification from bottom to top:- (i) Screed bed or bedding layer of 10 mm thick cement mortar 1:4 with mixing of WPC as per manufacturers instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3kg/sqm. (ii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986.

(iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying two coats of bituminous aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compound will be measured & paid separately.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified & directed. Note: Color and shade shall be as approved by Engineer-in-charge

M&L for glazed coloured ceramic tiles in vertical surfaces as dado of size 450x300x6-7mm, thick set and jointed in neat cement and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on other than fair faces of brick work etc complete all as specified & directed. Note: Color, size and shade shall be as approved by Engineer-in-charge

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm,

modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed. Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,

screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed. Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush/panel door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush/panel door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm as specified and directed.

S&F 100 mm long SS butt hinges, medium weight, cold rolled and fixed with screws/welded complete all as specified and directed.

S&F, rotational moulded polyethylene water storage tanks colour white (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and directed.

M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing wiring, etc. in brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and as directed.

S&F 15mm bore UPVC pipes Sch 40 including fittings, any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple etc complete laid in walls/ ceiling or laying in floor trench or fixed to walls complete all as specified and directed.

S&F 20mm bore UPVC pipes Sch 40 including fittings, any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple etc complete laid in walls/ ceiling or laying in floor trench or fixed to walls complete all as specified and directed.

S&F, vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm (minimum) white , with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including urinal spreader of brass chromium plated for fixing with 15 mm dia pipe, PVC connection, 40mm PVC waste pipe & 40 mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, complete all as specified and as directed. Make : Cat No. S4020103 of CERA or equivalent model of makes specified.

S & F, vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm with integral foot rests (excluding flusing cistern) including traps & set in cement concrete as specified including flush pipe and connecting to trap complete all as specified and as directed.

S&F, 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet ball valve and handle including brackets complete all as specified and as directed. Make : Cat No. B1010112 of CERA or equivalent model of makes specified.

S&F in repairs, vitreous china wash basin white of size 550mm x 400mm with brackets including, waste pipe, CP waste coupling 32 mm bore, PVC connection pipe complete all as specified and as directed. Make : Cat No. S2040141 of CERA or equivalent model of makes specified.

S & F, PVC connections, 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F, 15 mm bore pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. Make : Cat No. F1015361 of CERA or equivalent model of makes specified.

S & F, angle valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed. Cat No. F1015201 of CERA or equivalent model of makes specified.

S&F, bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed. Make : Cat No. F1015151 of CERA or equivalent model of makes specified.

S & F, stainless steel grating with square frame (grating thickness 1mm and frame thickness 1.5mm) of size 125mm (minimum) with waste hole complete all as directed.

S&F, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F, 75mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.

S&F, 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed

S&F, 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed

S&F, 110 mm dia PVC (SWR) junction single (Single T) equal or unequal of any radius complete all as specified and as directed

S&F, 75 mm dia PVC(SWR) nahani/floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Surface dressing not exc 15 cm deep in soft / loose soil complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in concrete bed to drain pipes, any type, 150 mm internal dia including packing under and haunching against the sides of the pipes after they are laid & tested complete all as specified and directed.

M&L for 150 mm bore reinforced concrete pipes of approved make, class NP2, laid and jointed complete with collars in cement mortar 1:1 complete all as specified & as directed. Notes:- (a) Before laying the pipes, the site of work shall be approved GE.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:5:8 using 20mm graded stone aggregates, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in PCC band, PCC beam, benching of drain, coping, slightly rounded or chamfered angles and throating, and similar work including necessary formwork complete all as specified and as directed.

Supply and fix on site Hume Pipe septic tank for 10 users designed to carry sewage and sullage water, including excavation in any type of soil, 150mm thick PCC 1:4:8 as in foundation, Vent shaft, connection etc., complete all as specified and as directed.

M&L for 1.20m dia and effective depth 1.50m Soakage wells including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including, RCC cover slab in M25, SRFC cover, interconnecting pipes of RCC and filled with brick bats complete all as specified and as directed.

M/s Renuka Enterprises (BID ID -3432461)

AZAD SERVICES (BID ID -3432469)

m/s shivam tools and equipment (BID ID -3432593)