SITC OF 60 HP SCF PUMP (HORIZONTAL TYPE) WITH RELATED ELECTRICAL AND MECHANICAL WORKS WITH 02 YEARS COMPREHENSIVE MAINTENANCE AT KOTHARIYA HUDCO PUMPING STATION.

NAME OF WORK:- SITC OF 60 HP SCF PUMP (HORIZONTAL TYPE) WITH RELATED

ELECTRICAL AND MECHANICAL WORKS WITH 02 YEARS COMPREHENSIVE

MAINTENANCE AT KOTHARIYA HUDCO PUMPING STATION.

Tender No: RMC/WATER O&M CELL/Aji /2026-27/02

Milestone dates for e-tendering is as under

1. Downloading of e-Tender documents 20-08-2026 to 07-09-2026 up to 18:00 hrs

2. Pre-bid meeting Bidders shall have to post their queries if

Date:-29-08-2026 at East Zone Office Room any on e-mail [email protected]

no.12 First Floor RMC at 11:00 AM. before date 29-08-2026 up to 11:00 AM.

3. Online submission of e–Tender (Tech. bid ) 07-09-2026 up to 18:00 hrs

4. Physical submission of EMD , e-Tender fee and 15-09-2026 up to 18:00 hrs

Black listed affidavit and also submit all the

documents online.

5. Verification of submitted documents (EMD, e - 16-09-2026 (If possible)

Tender fee, etc. and Opening of online tender

6. Opening of Price Bid (if possible) 18-09-2026 (If possible)

7. Bid Validity 120 days.

For further particular, visit us on (1) www.tender.nprocure.com, (2) www.rmc.gov.in

Add.City Engineer

Water Management Unit

Rajkot Municipal Corporation

Zaverchand Meghani Bhavan

East Zone Office - Room No -12

Bhavnagar Road – Rajkot

E mail : [email protected]

1.0 FORM OF PRICE PROPOSAL

2.0 SCHEDULES OF RATES & PRICES

SCHEDULE A - PAYMENT SCHUDULE

SCHEDULE B - PRICE

SCHEDULE C - BILL OF QUANTITIES (BOQ)

FORM OF PRICE PROPOSAL

Bidders are required to fill up all blank spaces in this Bid Form

Municipal Commissioner,

Rajkot Municipal Corporation

Dr.Ambedkar Bhava

Dhebarbhai Road

SUB : SITC OF 60 HP SCF PUMP (HORIZONTAL TYPE) WITH RELATED

ELECTRICAL AND MECHANICAL WORKS WITH 02 YEARS

COMPREHENSIVE MAINTENANCE AT KOTHARIYA HUDCO PUMPING

We have examined the Conditions of Contract, Employer's Requirements, Schedules, Addenda

Nos and the matters set out in the Appendix hereto. We have understood and checked

these documents and have not found any errors in them. We accordingly offer to design,

execute commission and to maintain for the two years the said Works and remedy any defects,

fit for purpose in conformity with these documents and the enclosed Proposal, for the fixed

lump sum of Rs. or other such sums as may be

determined in accordance with the terms and conditions of the Contract. The above amounts are

We agree to abide by this Bid until 180 days and it shall remain binding upon us and maybe

accepted at any time before that date. We acknowledge that the Appendix forms part of our

If our bid is accepted, we will provide the specified performance security, commence the

Works as soon as reasonably possible after receiving the Employer's Representative's notice to

commence, and complete the Works in accordance with the above-named documents within the

time stated in the Appendix to Technical Proposal.

Unless and until a formal Agreement is prepared and executed, this Bid, together with your

written, acceptance thereof, shall constitute a binding contract between us.

We understand that you are not bound to accept the lowest or any bid you may receive.

We are, Gentlemen

Yours faithfully

Signature in the capacity of duly authorized

to sign bids for and on behalf of

Note on Schedule

1. The bid is percentage rate bid for SITC OF 60 HP SCF PUMP (HORIZONTAL

TYPE) WITH RELATED ELECTRICAL AND MECHANICAL WORKS WITH

YEARS COMPREHENSIVE MAINTENANCE AT KOTHARIYA HUDCO PUMPING

2. The rates and prices shall be submitted in the formats given in the online Price

Schedules. Rates and prices received in any other formats will be rejected and the

Bids will be disqualified.

3. It will be entirely at the discretion of the Employer to accept or reject the bidder’s

proposal, without giving any reasons whatsoever.

listed in the online schedule .Prices quoted in online Schedule only will be considered

for price evaluation& shall formal part of the Contract Agreement.

successful bidder.

6. The bidder shall be deemed to have allowed in his price for provision, maintenance

and final removal of all temporary works of whatsoever nature required for

construction including temporary bunds, dewatering, diverting water, pumping,

providing civil foundation, required civil modification, rectification, finishing work

etc. to complete the Electro-Mechanical works. The rates shall also be deemed to

include any work sand setting out that may be required to be carried out for the same.

7. Where there is a discrepancy between the unit rates and the amount entered in the

Specifications and other sections of these bid documents and these document sare

to be taken as mutually explanatory of one another.

9. Prices quoted by the bidder shall be firm for the entire period of Contract without any

10. The bidder shall interpret the data furnished and carry out any additional study,

investigation or planning required to execute the work shall be this own cost.

11. The prices quoted shall also include the cost of testing and material utilized for testing.

12. The bidder should acquaint himself with the site conditions including the access to

Worksite. The successful bidder shall have to make suitable access to work sites a

this own cost. Thes e accesses will be used by the other contractors working

13. From each Running Account Bill, labour cess will be deducted as per norms.

The contractor shall have to avail P.F & E.S.I as per the applicable laws of

Government. The required documents shall have to be submitted by the contractor to

the competent authority.

14. The quoted rates should be exclusive GST and inclusive of all other taxes and duties.

15. The contractor shall have to quote their rates excluding GST and including other taxes and

the Invoice with break-up of GST is to be submitted accordingly, failing which, such

amount will be deducted from the bill of the agency and deposited accordingly. RMC shall

pay prevailing rate of GST. The contractor shall have to purchase the material required for

this tender work, only from the supplier having registered GST Number. RMC will not be

responsible to pay any amount towards GST if the material is purchased from the

unregistered supplier/not having GST Number.

16. The work contract tax will be borne by the agency.

17. The Electro-Mechanical equipment and pipes shall be inspected by Third Party

Inspection Agency PMC & RMC engineers, the costs of which are to be borne by

Signature of Contractor

Rajkot Municipal Corporation

Water Management Unit – East Zone

NAME OF WORK: - SITC OF 60 HP SCF PUMP (HORIZONTAL TYPE) WITH RELATED

ELECTRICAL AND MECHANICAL WORKS WITH 02 YEARS COMPREHENSIVE

MAINTENANCE AT KOTHARIYA HUDCO PUMPING STATION

SUMMARY OF COST ESTIMATE KOTHARIYA HUDCO P.STATION

(BOQ & RATES FOR EACH AS PER SCHEDULE-B, ATTACHED IN SEPARATE FOLDER)

Sr. Location of

Name Capital Cost Total Amount

Name Capital Cost Total Amount

No Pumping Station

P.STATION (Without GST) (Without GST)

I/We agree to carry out the above work at _ % (In Fig)

( (In words) Equal/Above/Below the

estimated cost.

Contractor Shall Have To quote the rates in the given online Price Bid only.

Signature of Contractor:

PAYMENT SCHEDULE

Schedule of Payment % Break-up of payment for each component of the Pumping

Machinery during Supply, Installation, Trial Run & Commissioning.

Sr. No. Break-Up Amount

1. On supply of equipment at site 65%

2. On erection, testing and commissioning of equipment 25%

3. After satisfactory completion of SITC period + 30 Days Trial 10%

Note: -Trial Run period of 30 Days.

Contractor’s Signature Add City Engineer

Rajkot Municipal Corporation

RAJKOT MUNICIPAL CORPORATION

WATER MANAGEMENT UNIT - EAST ZONE

NAME OF WORK: - AUGMENTATION WORK WITH SITC OF ELECTRICAL,

MECHANICAL & INSTRUMENTATION WORKS FOR EX. WDS AT KOTHARIYA HUDCO

PUMPING STATION OF RMC.

DESCRIPTION AMOUNT

HORIZONTAL CENTRIFUGAL PUMP ( HCF) 2 NO 6,16,900.00

Supply, Installation, Testing and Commissioning S.

(SITC) of horizontal mounted, side suction & UP

delivery type Horizontal Centrifugal Pump having

CI Casing, CF8M impeller & wear rings, SS410

Shaft & shaft sleeves, Mechanical Seals, and

suitable to couple with existing Induction Motor.

The scope also include all required accessories

viz. MSEP drain rim type base plate base frame

Flex. coupling, coupling guard, foundation bolts,

etc. complete as per IS/IEC and Specification and

also including in scope any other parts /

1 accessories / fittings as required to complete the

work in all respects & satisfactory operation of

Pump Capacity :-350 m3 / hr.,

Pump efficiency at Duty : mini. 84 % Existing

Motor Rating: 45 kW

Motor IP Rating : IP68

Cable Size :- ( 2R*3.5C*16 sq. mm2 ) = 20 MTR

CONTROL CABLE Size :- ( 1R*16C*1.5 mm2 )=

PROTECTION :- BTD , WTD , SBWLD , PSLD.

VALVES 1 NO 6,433

SITC of Manually Gear Operated CI / DI S.

Double Flanged, Non Rising Spindle type,

Sluice Valve conforming to IS 14846, PN 1.0 with

2 SS 304 seat rings and SS spindle with hot dipped

galvanised hardware's, bolts, nuts & washers,

gaskets, etc. as per data sheet.

Size : 150 mm NB (On headar line )

SITC of Electric actuator operated CI / DI 2 No 1,71,035

Double Flanged, Rising Spindle type, Sluice s.

Valve with actuator, integral starter,etc. conforming

3 1.0 with SS 304 seat rings and SS spindle with

all hot dipped galvanised hardware's, bolts, nuts &

washers, gaskets, etc. as per spcifications.

Size : 200 mm NB (On delivery of each SCF pump)

SITC of double flanged CI/ DI Dual Plate Check 2 NO 16,671

Valve conforming to API 594 Class 125/PN1.0 S.

with CS-WCB dual door, hinge pin & stop pin

of SS 410 , springs of AISI 304 and seat rings of

4 SS 304 (renewable), along with all required

accessories, gaskets and hardwares,etc. and as per

Size: 200 mm NB (On delivery of each SCF pump)

Supply, installation, testing and commissioning of 2 No 6,216

Flange ends Expansion Bellow (PN 1.0) as per s.

EJMA standards and complete with gaskets,

hardware, and required accessories as per IS &

Specifications.

Size: 200 mm NB x 300 mm (L) (on delivery of

MS PIPES & SPECIALS: 6 R 1,629

Supply, Gas cutting of pipe, Fabrication, M

welding, Installation, testing and commissioning T

of MS pipe & Specials, reducer, expander,

bend, Y-Joint, TEE etc. conforming to IS

6 & flanges confirming to IS 6392-PN-1.0,

fabricated from MS. plate with necessary

supports & anchoring. Pipe fabricated from MS

plate. (Excluding supply of flange)

Size : 168.3 mm OD X Mini. 4.5 mm Thk

Item Description as per 4.2.1 and of following size 30 R 2,850

Size : 219.1 mm OD X Mini. 6.3 mm Thk T

SITC of CI flanged Reducer / Expander 2 No 2,784.00

conforming to IS 1538 with gaskets, hardware s.

and required accessories as per specifications/IS.

Size: 200 mm X 150 mm X 600mm (L) (Eccentric

Expander on Delivery of SCF pump, delivery

flange-150 mm or size as per actual pump Delivery

flange size) - approx. 45 kg.

Supply, welding , Installation, testing & 96 kg. 150

commissioning of MS flat machined faced

flanges confirming to IS 6392 & drilled as per

9 IS-1538 with drilling off centre bolt holes and

flange thickness as per PN 1.0 including cutting &

welding. Size : 200 mm NB (Drilled)

Flanged Joints of Pipes, Fittings and Specials: 2 NO 611

Supply, Installation, Making of Flanged CI / MS / S.

GI Pipes, Fittings and Specials Joints with all

10 jointing materials, rubber packing, nut bolts, labour

etc.for complete connection.

Size: 150 mm dia.

Item Description as per 4.4.1 and of following size 20 NO 837

Size : 200 mm dia.

Providing, Supply of Structure Steel at site of 350 kg. 64.838

work with freight, loading, unloading carting,

etc. including all taxes and duties complete

such as joints, channels, angles, Iron Rails,

MONORAIL, ISA/ISMC/ISMB/MS flat, Plates,

12 Chequered plates (below 10mm thickness) for

cable trench etc. required for support structure of

all Electro-mechanical equipment, piping, etc. for

support on floor / wall / beam / brackets etc. as per

Labour Charges for lowering, laying, Fixing with 300 kg. 11.365

fabrication various size section of MS such as

joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered

13 plates, for cable trench etc Complete with two

coats of red oxide and two coats of approved

colour shade of epoxy paint as per relevant IS and

as per specification.

SITC of Bourden type Pressure Guage glycerene 2 No 2,213

filled having 150 mm dial with necessary s.

fittings/accessories (Manifold valve, nipples, etc.

shall be in SS 316 only) as per specifications

14 & complete in all respects. Pressure gauge shall

be provided at each Pump delivery line & 1 no. at

Range : 0 - 6 Kg/cm2

Providing C.C.work in 1:2:4 with ramming, curring 2 Cu

etc comp. at valve support & other location as mt

M.S.150mm pipe line,lowring,leying,jointing and 5 mtr 24

16 alignment work .

M.S.200mm pipe line,lowring,leying,jointing and 20 mtr 29

17 alignment work .

Installation, Testing & Commissioning of 65 HP 2 Job

Horizontal submersible Pump set with all necessary

accessories and manpower etc..

MONORAIL EOT WITH ELECTRIC CHAIN 1 Set 3,15,202

HOISTSITC of Electrically Operated Chain Hoist

& Electrically operated Trolley, suitable to operate

on Mono Rail Girder having motorised motion in

vertical lifting & cross travel, manufactured as per

latest indian standard and class complete with

electrically operated chain hoist & Electically

operated geared trolley, brake, chain-gear, motors,

safety device, pendant push button, starter panel,

cables from motor to starter panel and all other

required accessories like limit switches, panel,

power supply system (Fastoon cable type),

fasteners, epoxy painting, etc. tested for over load

as per IS complete as per specifications and

complete in all respect.Capacity : 2 Ton. Min. (For

SCF Pump lifting) 'Lift : 10.00 m as mini. or as per

site req.Bay Length : 12 m min. or as per site

req.(w/o MONORAIL GIRDER & MS supporting

structure)Note: (1) Minimum as specified capacity

or higher as per requirement such that ECH

capacity is min.1.25 times of the pump/motor OR

single heaviest component

SITC of 82.5 kVA or higher standard rating, 415 1 NO 9,19,068.00

V,50 Hz, 3 Phase, 4 wire Diesel S.

Generating Set. Diesel engine shall be complete

with necessary controls and safety

devices confirming to relevant ISS/BSS with latest

amendments (minimum CPCB IV + PRIME

POWER SILENT), DG Microprocessor controller

unit with kWH meter. Diesel Engine shall be

suitable for continuous operation of generator set

duty inclusive of fly wheel, air cleaner, radiator. fan

with guard, fuel pump, fuel filter, Electronic

governor, auto main fail starting, electrical starting

system with starter, 24V battery, Fuel Tank voltage

regulator, instrument panel, Exhaust silencer,

protections against low lubrication oil pressure,high

water temperature. Alternator shall be 415V,

phase, 50 Hz, 4 wire, 0.8 power factor, self

excited,self regulated,brushless type,drip proof

confirming to IS:4722 with latest amendments.

The engine and alternator shall be coupled over a

sturdy common base frame.

Floor mounted,dust & vermin proof, indoor type

control panel shall be consisting

of Thermal magnetic MCCB of suitable normal

current rating,with combined

overload and earth fault protective relays/release,

voltmetre with selector

switch,ammeter of suitable range with selector

switch, frequency meter, Energy

meter, CTs, indicating lamps with fuse and switch

control, complete & with

necessary interconnections,fuses,lables and other

accessories.Day fuel tank with

necessary fuel hoses to the engine,all as per detailed

specification and complete in

all respect as required.

SITC of Acoustic enclosure suitable for 82.5 kVA

DG set, made out of 18 SWG,

CRCA Sheet, Sound absorbing matewrial

Rockwood of 64 density & 100 mm

thick conforming ti IS:8183. The resin boinded

Rockwood covered from inside

level not more than 75 dB at a distance of 1 mtr, as

PVCT / CPCB norms, on

provided foundation.

LV MCC Panel ( 350 A or higher standard

rating) with Micro processor based soft starter:

SITC of LV MCC Panel totally enclosed, dust &

bermin proof, indoor type, minimum degree of

protection - IP 52 as per IS: 2147, operation on 3-

Phase, 4 Wire, 415V, 50Hz, Neutral effectively

grounded, with instrumentation compartments

accomodating LED type indicating lamps, control

contactors as per IS: 13947, CT of accuracy class- I

as per IS: 2705, relays, meters & control MCBs, air

insulated electrolitic grade Aluminum bus bar for

three phase & neutral system with incomming

21 breaker- microprocessor based Air Circuit Breakers

(electrically operated drawout type)/ air break fixed

type MCCB with trip free mechanism, current

limiting type as per IS: 8828,Motor Contractor (as

per type -2 coordination), Overload Relay with

built-in single phasing prevention feature &

auxiliary feeders as per SLD drawings, momentary

contact type push buttons, equipment fittings, bus

bars, cable boxes, cable gland, incoming & ougoing

cable connection for 1100V grade, Aluminium/

Copper conductor XLPE / PVC insulated & PVC

sheathed armoured cable, 10% spare terminals,

power wiring using 1100V grade, FRLS insulated

copper conductor wires conforming to IS: 694 &

8130, cable compartments / alleys of minimum 300 1 6,33,644.00

mm size, GI / Al earth bus bar for entire length.

MCC shall be fabricated from cold rolled, coled

annealed (CRCA) sheet steel & minimum thickness

of various members shall be as follows:

Base Frame / Channel / Gland Plate: 3 mm, Load

Bearing Members / Doors: 2 mm and Internal

Partitions: 1.6 mm ( Minium Size panel:- 2700 x

(1) SOFT STARTER FOR 50 KW MOTOR :

Microprocessor based Soft Starter with built-in

by pass contactor,Semiconductor Fuses,

Harmonic Filters, cast resin type CT, Digital

MFM, Analogue Ammeter & minimum

Channel Temperature Scanner with RS

communication port.

Each feeder comprising of Soft Starter with

Internal/External bypass contactor for 50kW Motor

or higher as per pump manufacturer reco. with soft

starter rating minimum(110A @ 50deg C) with

suitable derating with detachable type door

mounted display key pad and with 125A TPN

microprocessor MCCB LSIG, 250A, AC3 duty

Line contactor, Semi conductor fuse, MFM,Digital

Ammeter,ASS, Resin Cast CT Cl: 0.5, Space

Heater, temp. scanner, SPP, A/M, L/R switch,

Indicating lamps, Push buttons etc.& LCS (PBS)

for Actuator-valve with 16A FP MCB, open, close,

stop PB, open, close, trip & L/R indication & 2 nos.

terminal strip, SP MCB , WPR (make-minilec)

WLC(make-minilec).

(2) 4P CONTACTOR (255 A OR HIGHER

STANDARD RATING) BASED MANUAL

CHANGE OVER FOR 82.5 KVA

GENERATOR: 2 Nos. ( 1 W + 1 S ) Both

connected with feeder.

Both contactors Interlocking with main LV MCC

panel as only one switchgear remain ON at a time

either contactor or MCCB.

(3)63A TPN TM MCCB FEEDER : 2 Nos. (2

Each feeder comprising of 63A TPN Thermal

Magnetic (TM) MCCB, with indicating lamp etc.

(4)125A POWER FEEDER : 1 no spare

Each feeder comprising of 125A TPN TM MCCB

50kA (LSIG) with on, off, trip Indicating lamps,

etc.complete in all respects

SITC of Lighting Distribution Board (LDB) as 1.00 No 6,901.00

SITC of 3 Phase 4 Wire 4P, 6 Way double door

Prewired LDB each for Indoor Lighting & Outdoor

22 Lighting Suitable to house :

Incoming: 40A FP, ELCB (30mA)

Outgoing: 20A SP MCB (9 nos.) & 16A SP MCB

(9 nos.) 1 nos For PMCC Panel room and 1 nos for

dead water pump room.

LOW VOLTAGE (LT) CABLES 150. Mt 868.00

Supply, laying, testing and commissioning of 1.1 00 r.

kV, A2XFY/2XWY (Extruded innersheath) XLPE

insulated (IS 7098) AL stranded conductor,

Extruded innersheath cables as per specification &

The cable when laid outside the building shall be

laid underground in trench with brick & sand

protection/in DWC pipes as per specified method

and shall be laid in prepared trench/ on cable tray

when laid inside the building.

SITC of 3.5C x 150 sq. mm. A2XFY( Extruded

innersheath) Cable

(DG set to PMCC Panel)

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 150 Mt 451.00

ISI armoured cable multistrand / Solid Copper r

conductor for 1.1 kV. to be laid on wall with

24 necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables. (

For outdoor and indoor lighting) (1) 4 core 4 Sq.

CABLE END TERMINATION AND 8 No 412.00

CONNECTION:SITC of Double compression s.

Ni-Plated brass cable glands and crimping type

Bimetallic lugs / sockets with necessary tools

and equipments as specified in specifications

and IS. The glands and lugs / sockets shall be

suitable for cable size and type mentioned below &

as per specifications.1) Earthing the glands and

armouring with earthing clamp and jumper and

25 also connecting to common earth bar.2) The job

also includes, if necessary, supply & fixing of

extension busbar of same material on MCCB or

panel board terminal / connector to connect more

than one no. of parallel cables or to connect higher

size cable to lower size unit. The job also includes

earthing the glands and armour of the cable with

common earth bar or flexible copper mesh.(Cable

termination qty. shall be as per site

requirement)3.5C x 150 sq. mm. A2XFY Cable

4C * 4 sq.mm Supplying & erecting 20 No 65.00

26 XLPE(IS:7098)(I)-88 ISI armoured copper cable . ( s

For outdoor and indoor lighting)

CABLE TRAY 50 Mt 276.00

SITC of G.I. (hot dip galvanised )Ladder type r.

medium duty (2mm thick) Cable Tray with

necessary bends, tees, reducers, covers and

clamps for fixing. All material shall be Hot dip

galvanised as per Specification. And including

all accessories.

150 x 50 mm - Ladder type

Making Trench/ excavation in soft soil of 50 Mt 55.00

suitable width and of depth (minimum 750mm r.

depth (LT) & 1000mm for HT) for laying cable/

DWC pipe and back filling the same and making

the surface as normal ground as per IS & Tender

Specification / Drg. (For laying of HT/LT cable)

Cable Protection/ Covering in Trench: Cable 50 Mt 139.00

Covering with second class bricks or cement tiles r.

laid cover the cable (top) & also on both side

with sand bedding/cushioning of 75mm.&

covering of 150mm Layer of sand above cable

(16 bricks per meter.) as per IS & Tender Drg/

Specification. (For HT/LT cable protection )

complete in all respects as instructed by EIC.

CHEMICAL EARTHING SYSTEM 2 Set 10,489.00

SITC of Maintenance free chemical earthing

(copper) with earthpit of minimum bore size dia.

225mm Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS-3043:1987 /Tech spec.

made of corrosion free Pipes having Outer pipe dia

of 48 mm having 250 Micron copper plating,

Inner corrosion free Hot dip galvanised (80 to

30 100 micron) pipe dia of 26 mm with copper

flat strip type connection terminal 14mm dia

with constant ohmic value surrounded by highly

conductive corrosion resistant chemical

compound with high charge dissipation suitable

for electrical installation & of 3Mtr. length of Pipe

with two nos. 25Kg. bag of Back filling compound..

NOTE: Earthing Resistance value & date shall be

painted on the chamber cover.

SITC of Maintenance free chemical earthing with 3 Set 10,489.00

earthpit of minimum bore size dia. 225mm Safe

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS- 3043:1987 /Tech spec.

made of corrosion free Hot dip Galvanised

(min 150 Microns) Pipes having Outer pipe dia

of 76 mm , Inner corrosion free Hot dip galvanised

(80 to 100 micron) pipe dia of 26 mm with

copper flat strip type connection terminal 14mm

dia with constant ohmic value surrounded by

highly conductive corrosion resistant chemical

compound with high charge dissipation suitable

for electrical installation & 3Mtr. length of Pipe

with two nos. 25Kg. bag of Back filling compound.

NOTE: Earthing Resistance value & date shall be

painted on the chamber cover.

SITC of 50mm(w) x 6mm(T) etc. sizes as required, 30 Kg 77.00

HOT dip galvanized GI Strip including supply & .

fixing using GI spacers, saddles when laid inside

the building and inclusive of excavation & refilling

of earth when laid outside the building &

interconnection with earth pit & all electro-

mechanical equipments.

Supply, laying and erection of 25mm(w) x 50 Kg 77.00

3mm(T) etc. sizes as required, HOT dip .

galvanized GI Strip including supply & fixing using

GI spacers, saddles when laid inside the building

33 and inclusive of excavation & refilling of earth

when laid outside the building & interconnection

with earth pit & all electro-mechanical

Supply, laying and erection of 40mm(w) x 50 Kg 787.00

6mm(T) etc. sizes Copper Strip including supply .

& fixing of bolts, saddles when laid inside the

building and inclusive of excavation & refilling

of earth when laid outside the building &

interconnection with earth pit & Tr. neutral.

Copper Bolt,Nuts ,Washers shall be used for

Connecting Earth electrode to individual eqp.

Bitumen shall be used at the place of joint/welding.

INTERNAL WIRING 100 Mt 103.00

SITC of Mains & outlet points wiring with 1.1 kV r.

grade FRLS PVC insulated ISI marked flexible

stranded copper conductor wires with medium class

min. 25mm. dia. Rigid PVC pipe and accessories

to be erected concealed in / to be run on

surface / wall / ceiling with following sizes as

mentioned below. The unit rate wirings shall be

with connector, PVC junction box, wires,

holder, ceiling rose, angle holder, switch,

sockets, switch board, brass chromium /

cadmium plated machine screws, phase and

neutral wires, green Earth continuity wires etc.

as required to complete wiring from LDB panel to

the final outlet termination points. The wiring shall

be as per IS:732, IS:4648 and as per tender

specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

As per Sr. No.-7.1 (b) SITC of Mains wiring with 3 50 Mt 127.00

wire 2.5 sq.mm as per tender specification & IS. r.

SITC of Point wiring for Light / fan / Bell / Primary 10 No 421.00

Point with 2nos. 1.5 sq. mm & earth wire of 1.5 s.

sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multistrand copper

wires , pipe to be erected concealed in flushed on

wall / ceiling, complete with 6A Tissino Type ISI

marked flush type switch / bell push & accessories

erected on metal / PVC Box covered with 3 mm

thick PC (Polycarbonate) / Acrylic sheet with

necessary lamp holder / ceiling Rose / H. D.

connector as directed with medium class Rigid PVC

pipe & accessories.

SITC of 6A independent Plug with 2nos. 1.5 2 No 372.00

sq.mm Cu. Mains size wiring & earthwire of 1.5 s.

sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires

with medium class Rigid PVC pipe and

accessories to be erected on wall / ceiling,

complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity

connection erected on Metal / PVC box covered

with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

SITC of One 300/380 mm dia. Ex fan 16A 2 No 721.00

independent Plug point near Ex. Fan with 2nos. 4 s.

sq.mm Cu. Mains size wiring & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper

wires with medium class Rigid PVC pipe and

accessories to be erected on wall / ceiling, complete

with ISI marked 3Pin socket and tissino type switch

erected with earth continuity connection erected

on Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet. Plug point shall

be near Ex.Fan.

SITC of 6/16A independent Plug with 2nos. 4 3 No 721.00

sq.mm Cu. Mains size wiring & earthwire of 1.5 s.

sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires

with medium class Rigid PVC pipe and

accessories to be erected on wall / ceiling,

complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity

connection erected on Metal / PVC box covered

with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

LED LIGHT FIXTURES & LIGHTING: 5 No 370.00

SITC of Indoor wall mounting 20Watt or up to s.

25% higher wattage LED 4 feet Tube Light indoor

fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA polyester powder

coated and high U.V. & corrosion resistance

with diffuser and/or Polycarbonate optics with

company mark/name 120 to 300 V,Power Factor

more than 0.9, THD < 20 %, CCT 4000 K to

6500K, Uniformity ratio >0.7, Luminaries

efficacy> 85 lumens/watt ,LED driver efficiency >

(Each fitting required LM-79 & LM-80

Tube Light with integral / non-integral driver,

Surge-4KV,IP-20, 4 feet, Cat-III

SITC of 380mm sweep 1400 R.P.M exhaust 2 No 3,052.00

fan, capacitor type, having double ball bearing, s.

M.S.blades, mounting frame, forearms, suitable

to operate on 230V,50 HZ AC supply

conforming to IS: 2312.Fan shall be painted with

epoxy grey colour controlled by one 6 A flush type

switch on board and 6A plug point near Ex. fan. (2

nos. LT Room cum PH)

EXTERNAL LIGHTING (Flood LIGHT): 14 No 6,116.00

SITC of 100W LED or higher standard size Wall s.

mounted LED Flood Light fittings with High

power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 20 %,

CCT 5000 K to 5700K, Uniformity ratio >0.45,

Luminaries efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.( Each fittings required

LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III For Outdoor use:

SITC of 200W LED or higher standard size Wall 3 No 9,105.00

mounted LED Flood Light fittings with High s.

power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 20 %,

CCT 5000 K to 5700K, Uniformity ratio >0.45,

Luminaries efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.( Each fittings required

LM-79 & LM-80 certificates) (IP-65), Surge -4KV

Cat-III For Outdoor use:

Providing and erecting Approved make Ceiling fan 4 No 1,581.00

with double ball bearing ISI mark with condenser s.

A.C. 23OV.50 c/s.1200 mm. sweep complete,

canopy erected on existing hook or clamp with

SAFETY ACCESSORIES 2 No 6,526.00

SITC of following safety accessories complete s.

with necessary fixing brackets, other accessories

and tools etc. as required to complete the job.

Supply & Erecting carbon dioxide (CO2) fire

extinguisher of 4.5kg capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with nut &

bolts grouted in wall complete.

For 10 HP 3 phase open well horizontal mono block 1 NO 42,952.00

pump set suitable for 1725 LPM to 940 LPM @ 15 S

to 36 MTR head suitable for 65/80 mm dia delivery

pipe with Supplying and erecting push button

operated fully automatic Star-Delta starter with

Nos.of 32A. rating contactors and. 1 No. of directly

operated thermal overload relay having 20-32A

range in sheet steel enclosure for 3 phase 415V.

Hz. A.C. motors up to 35 H.P.

Brother DCP-B7600DB All-in-One Monochrome 1 NO 10000.00

Laser Printer, USB & Auto Duplex, LCD Display, S

34ppm, for Business..

Samsung ML-2161 Laser Printer series NO

TOTAL OF MECHANICAL & ELECTRICAL WORK W/O GST

TOTAL OF MECHANICAL & INSTRUMENTATION WORK WITH 18% GST

SAY RS. ( FOURTY NINE THOUSAND NINTY SEVEN ONE HUNDREND

SIXTY TWO ONLY)

A.E. ELE. A.A.E. MECH. D.E.E. MECH. A.C.E.

A.B. GOHIL P.G.PRAJAPATI D.Y. TRIVEDI K.P. DETHARIYA