Repair Replacement of joinery roof ceiling footpath hard standing tilling and certain repair of Misc BR works at Zone 1 Zone 1A Zone 3A and Zone 4 under GE S Tezpur

Amount

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) n exc. 1.50 Sqm complete all as specified and as directed.

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed.

Taking down Shutters of any description, not exc 1.00 Sqm Each, and keep in Safe Custody for removing to store, complete all as specified and as directed.

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and as directed.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as specified and as directed.

M&L 2nd class HW in scantling fixed clean swan in framed including fixing MS Cleats & nuts work/Unframed wk including fixing MS Cleats & nuts including dismantling complete all as specified and as directed.

M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails including dismantling complete all as specified and as directed.

M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 13 sqcm & n exe 25 sqcm fixed with nails including dismantling complete all as specified and as directed.

S & F Wire netting(bird mesh) of galvanised steel wire 0.71 mm dia 12 mm mesh size fixed with tinned tacks of wire staples complete all as specified and directed.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each complete all as specified and as directed.

S&F, 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F, 35 mm factory made Flush shutters, with particle board core and both face is covered with decorative face veneer of 4 mm thick, with lipping/frame to match complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter(minimum three panel) open rebated and prepared to receive glass, gauze etc edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members complete all as specified and as directed.

S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Solid PVC moulded door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, complete all as specified and as directed.

S& F Factory made PVC solid moulded Door Shutter, 30 mm thick with board core (styles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed.

Taking down and Refixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed.

Taking down and Re-fixing Shutters of any description n exc. 1.00 Sqm Each in the Same Opening complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description area n exc 1.0 Sqm Each complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description area exc 1.0 Sqm and n exc 2.0 Sqm Each complete all as specified and as directed.

M&L for refixing of steel gate including welding, cutting of hinges and welding/ replacing hinges of steel sections after raising gate hight up/ down to make clearance from bottom or in same place area of gate not exc 3 sqm of each side complete all as specified and directed. Note: Steel member shall be measured and paid seperately

Repair windows like steel/wooden/aluminium by using wire brush and easing windows shutter by using oil,greesing or cleaning cement morter or removing old rust, dust,mud etc make it good and smooth to openable in a normal process. for aluminium shutters- including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc Complete all as specifiesd and as directed by EIC.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strength not less than 75 kg/Sq cm complete all as specified and as directed.

Ditto as per item No 25 except bricks complete all as sepcified and directed.

M & L for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) having compressive strenght not less than 75 kg/Sq cm complete all as sepcified and directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as sepcified and directed.

M&L Rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid for separately

M&L Preparing new Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of damp sheild primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M & L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair complete all as specified and directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of damp sheild primer and applied over 1mm thick water proof wall care putty by smart painting method including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

Supply only water proofing compound. Conforming to IS -2645.complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 straps, etc. have screwed, ends including keys, cotters, wedges, etc. for timber trusses and similar work conforming to Fe- 290 Gde-E-165 complete all as specified and directed.

S & F Stainless steel handles fancy/ decorative type 100 mm size complete all as specified and directed.

S&F Stainless steel, barrel tower bolt decorative type 150mm long complete all as specified and directed.

S & F Brass handles, cast type, polished bright100 mm size complete all as specified and directed.

S&F Brass barrel tower bolts of length 150 mm , with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron, Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated aluminium window and ventilator shutters,(Thickness or powder coating not less than 50 micron). sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc.complete all as specified and directed.

S & F Powder coated aluminium door shutters (Thickness or powder coating not less than 50 micron)., aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in each pane in squares not exc 0.50 sqm in each pane complete all as specified and directed.

S&F 5.0 mm thick sheet glass ordinary/tinted/ Filmed to match exixting quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane including hacking out old broken glass any, size, quality or description from wooden / metal frame complete all as specified and directed.

S&F 4 mm thick frosted/ pin headed glass in ventilator shutters including in square not exc 0.50 sqm in each pane hacking out old broken glass any, size, quality or description from wooden / metal frame works all as specified and directed by Engr-in-Charge

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.00mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S&F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including petty repairs material like screws/nails, plug, MS fillet etc in Steel windows etc. to make it functional complete all as specified and directed. Note: Any items required to be replaced shall be paid under respective items.

S&F 75 mm Butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S& F 100 mm stainless steel Butt hinges with with SS Screw complete all as specified and directed.

S&F 100mm Butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type, anodised, 150 mm long and fixed with screws complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles fabricated type, anodised, 150 mm long and fixed with screws complete all as specified and directed.

S&F in repair MS 300 mm ordinary pattern door spring including roller and roller plate complete all as specified and directed.

S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs Casement stays, mild steel, size 300mm, with higned joint and two plates, with studs complete all as specified and directed.

S&F in repairs Aluminium plate type hooks and eyes 125mm long complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including filling construction joint at interval of 3.00 mtr and at every corner and shall be filled with bituminous sand filler of ratio 1:3. complete all as specified and directed.

M&L 50 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including filling construction joint at interval of 3.00 mtr and at every corner and shall be filled with bituminous sand filler of ratio 1:3. complete all as specified and directed.

M&L 25 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as in sub base/floor etc complete all as specifed and as directed.

M&L 40 mm thick,Cement concrete, type B-1, (1:2:4), 20 mm graded aggregate as in floor making finished even and smooth using extra cement complete all as specified and directed.

M&L PCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation/mass concrete complete all as specified and directed.

M&L 100 mm thick,Cement concrete, type D-2, (1:4:8), 40 mm graded aggregate as in sub base even and rough to receive topping layer complete all as specified and directed.

M & L for providing Plain Cement Concrete (1:2:4) type B0 using 12.5mm graded aggregate as in copings,levelling course in lintels, cills, plinth courses, string courses,lacing courses, parapets water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors Laid, dry and pointed, aprons etc.complete all as specified and directed.

M&L 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade (ISI marked) with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as spedified and directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks over compacted sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Laying/ fixing only using old paver paver block in obtained from demolition at site as in footpath of thickness & size/ shape, obtained from dismantaling at site compacted bed of coarse sand including sand and applying water proof paint , filling the joints with fine sand finishing and sweeping extra sand; complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L for RCC type B1 1:2:4 (20 mm graded agg) as slab supported on wall , beams columns in floor, roofs landing and the like complete all as specified and directed.

M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

Formwork to sides and soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed.

M&L 15mm thick rendering in CM (1:4) on one side of lathing finished even and fair without using extra cement including 0.71mm chicken wire and size of mesh 12mm complete all as specified and directed.

M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and fair complete all as specified and directed.

Up rooting of tree from walls of bldgs up to extended root and spraying of acid of required quantity complete from any location of Bldg up to 4 storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type B0(1:2:4) using 12.5mm graded aggregate including necessary scafolding complete for tree of girth up to 5 to 25 cm.complete all as specified and as directed.

M & L for repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc complete all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately)

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed. (Note: Any items required to be replaced shall be paid under respective items).

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed. (Note: Any items required to be replaced shall be paid under respective items).

M&L Applying one coat of Acrylic distemper by smart painting method to old wall surfaces of walls and cornices including preparation of old decorative surface and removal of smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1mm thick water proof wall care putty by smart painting method including rubbing with emmery paper to make wall surface smooth and even by smart painting method complete all as specified and directed.

M&L One coat of white wash on old wall surfaces of walls and cornices including preparation of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed.

M&L Two coat of white wash on old wall surfaces of walls and cornices including preparation of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed.

M&L One coat of white wash on ceiling and cornices including preparation of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed.

M&L for Old wall surface including properly preparation/removal of existing paint surface and fillings the cracks with exterior wall care putty and pigment and applying one coat of weather coat water proofing paints as in boundry wall, single , double and triple storey bldg, complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two coats of weather coat over a coat of polymer (exterior grade) putty to make surface smooth and one coat of primer damp sheild over old plastered wall complete all as specefied and directed.

M&L Preparing new Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L preparing new Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M & L Preperation of new untreated wooden Surfaces plain or moulded, two coats of synthetic enamal paint over a coat of primer n exc 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint (including GI sheets in 3 storey bldgs) complete all as specified and as directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint (including GI sheets in 3 storey bldgs) over a coat of red oxide primer complete all as specified and as directed.

M&L writing letters or figures (Block, roman, itallic or indian) n.exc. 30cm high. complete all as specified and as directed.

M&L writing stops, commas, short lines, dashes, hyphens, brackets etc.complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L for chequered cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L Glazed Ceramic tiles 8 to 10 mm thick (square/ rectangular) any shade, polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L Glazed Ceramic tiles 8 to 10 mm thick (square/ rectangular) any shade, polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 10 mm thick rendering in CM 1:4.complete all as specified and as directed.

M&L Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L Glazed Ceramic tiles 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as per item No 112 above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8 mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed with epoxy filler to match over 10mm screeding in Cement mortar 1:3 complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles 600 x 300 mm x 7 to 8 mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed with epoxy filler to match over 10mm screed bed in Cement mortar 1:3 complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over and using 10mm thick cement plater in CM (1:4) complete all as specified and as directed.

M&L for Vitrified parking tiles of any colour/pattern 40cmX40cmX8 to 10 mm thick, set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes. complete all as specified and directed.

S& F for laying 15mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors including taking down all complete all as specified and directed.

S&F for laying 20mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and as directed.

S & F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down complete all as specified and as directed.

S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down complete all as specified and as directed.

Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed.

S & F in repair only 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F, as in repair, Pillar taps fancy type of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms) complete all as specified and as directed.

S & F,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F, as in repair, bibtap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) complete all as specified and as directed.

S & F, as in repair, stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions including dismantling wall tiles and fixing broken tiles with matching colour, area of wall tiles not exceeding 0.50 sqm. complete all as specified and as directed.

S&F in repairs 15mm dia stop valve fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete complete all as specified and as directed.

S & F, as in repair,15 mm stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed for 15 mm bore of pipe(minimum weight 90 gms) etc complete all as specified and directed.

S&F, waste coupling CP 32/40 mm dia for glazed ware basins/ Sink etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed.

M & L, as in repair for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement complete all as specified and as directed.

S&F in repairs stainless steel curtain rod of 20/25 mm bore incl brackets and end knobs for door and window complete all as specified and directed.

S & F, as in repairs, sheet glass self assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

S & F, as in repair, counter type wash basin vitreous china wash basin, white,size 545 x 545 x 180 mm, including central hole mixer taps, waste coupling & waste pipe, complete all as specified and directed.

S&F in repair vitreous china wah basin pedestal pattern white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S&F, Bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement with spreader complete all as specified and directed.

S&F 08 mm thick curved shaped urinal partition with frosted glass of size 900x450 mm including fixing accessories, fixing bolt, etc complete all as specified and directed. Cat part No JSC-CHR-810UC450X of make Jaquar as per approval of GE

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S&F 5.0 mm thick mirror with decorative frame of size of face size 40 to 50 mm mounted on 10 to 12 mm water proof plywood and fixed in to chromium plated / stailess steel cup washers of approved pattern complete all as specified and as directed.

S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

S&F Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified and as directed.

Dismantling and breaking up PVC drain pipes of any dia jointed in CM and taking out of trenches complete all as specified and as directed..

S & F, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and as directed.

S & F, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor complete all as specified and as directed.

Fixing only , 110 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all pipe all as sepcified and directed

Fixing only, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor all as sepcified and directed

S&F PVC (SWR) Bend 110mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 75mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 110mm bore (dia), Double (Double T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 110mm bore (dia), Jointing to Pipe with Solvent Cement, complete all as specified and as directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent complete all as specified and directed.

Material & Labour in repairs 19/20 mm thick Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

M&L in repair Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work to timber frame work complete all as specified and directed

S&F Solid PVC particle board consisting of 18-20 mm thick prelaminated PVC sheet inclusive of solvent cement and fixing at site all as spacified and directed

S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed.

S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed

S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed.

S & F in repairs PTMT Swivel shower dia with shower Arm 15 mm dia 195 mm with bend of 45 degree with flange any colour for fixing mm pipe all (ISI marked) complete all as specified and directed.

Supply and fix, as in repair, Overhead Shower 125 mm dia Round Shape Single Flow (ABS Body) Chromium Plated with Gray Face Plate) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same opening after reparing and make functional including replacement of fitting and fixture for proper functioning as required complete all as specified and directed.

S & F in repairs Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg complete all as specified and directed.

S & F in repairs aluminum mortice lock verticle type 75 mm 4/6 levers complete all as specified and directed.

S&F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drwansteel spring complete all as specified and directed.

S&F In repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly complete all as specified and directed.

M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm including taking down plaster etccomplete all as specified and directed.

Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm applied over a coat of hot blown bitumen of grade 85/25 @1.2 Kg/Sqm, The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capavity on same place with all required necessary fittings complete all as specified and as directed.

M&L for cutting grooves in brick wall 75mmwide & 65mm deep for tucking in edges of felt & shapping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Cutting out cracks to V section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1(by Weight) complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position, not otherwise specifically provided for and M & L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregates for , in roof Kerbs,rounded or chamfered or haunching in chajjas, benching, filleting,slightly rounding or chamfering on edges, filling undulations / depressions in roof surface, providing concrete platform for tanks wherever required complete all as specified and directed.

S & F in repairs wall mixer 3-in-1 CP 15 mm bore including 125 mm dia overhead shower, complete with 15 mm long bend pipe and wall flenge including making good wall surface complte all as specified and directed Make :-Jaquar or Equivalent approved by GE

S&F in repair 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed. Make: Jaquar or Equivalent approved by GE

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S& F in repair of Towel Ring of stainless steel fixed and including Chromium plated brass screws complete all as specified and directed.

S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws complete all as specified and directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and (excluding 10 litre capacity low level Flushing Cistern) and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F in repair vitreous china premium/1st qualit wash dwon water closet Single Piece EWC with/ivory/off white (closed pattern incl all necessary accessories like rag bolts/gel gasket etc) including 10liters capacity vitreous china valveless syphonic action type flushing cistern low level white, with inlet ball valve float and hanle including brackets complete all as specified and directed.

S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan as in repair complete all as specified and colour as directed.

Supply & Fix as in repairs Kitchen plate rack made of stainless steel sheet 0.60 mm thick of overall size 900mm X 850mm X 250mm with three shelf with all fittings accessories as in repair complete all as specified and directed.

M & L for repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc with all fittings accessories as in repair complete as directed. Note : Reinforcement if any provided shall be measured and paid separately

Taking down existing damaged water closet alongwith complete PCC and lime concrete from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, natural colour with cold cut back adhessive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.

Dismantling Structural steel work includings door, gates, etc and similar works with all fittings accessories as in repair complete as directed.

Supply & Fix Framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed.

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 290 (Gde E-165 ) complete all as specified and directed.

Refixing only steel truss,rafter and purlins of different size bend to shape, cut to length etc, including necessary welding,special shape washer, complete all as specified and directed.

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering complete all as specified and directed.

S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Corrugated Steel Sheeting 0.63mm thick, galvanised with Zinc Coating @ 120 Gram per Square Metre in Two-Corruga-tion Side Lap fixed with coach screw Cranked Hook Bolts with Washer, etc. complete all as specified and as directed.

S&F 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked book bolts. Complete all as specefied and directed.

S&F in repairs center hole basin mixer without pop-up waste system complete all as specified and directed.

S&F in repairs angle cock 15mm bore, two way, chromium plated, fixed to GI or steel tubing incl fittings complete all as specified and directed.

Supply & fix radiant door bottom sealing strip guard (door seal) complete all a specified and directed.

S&F in repair sensor (battery operated) for urinal pot including battries and all fittings and fixture complete all as specified and directed for model Number STL-51087 (Jaquar).

S&F 6 Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment over 10mm thick screed bed in CM 1:6 complete all as specified and directed

S&F in repair Auto Closing urinal valve alloy CP with wall flange (push type) for 15mm bore complete all as specified and directed. Model No:PRS-CHR-077 ,Make: Jaquar approved by GE

M&L for Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length.

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying french polish two or more coats over a coat of wood fillers complete all as specified and as directed.

M&L for one coat of exterior emulsion floor coating paint aesthetic glossy finish including preparation of surface complete all as specified and directed.

Disconnecting existing tanks capacity exc 500 ltrs but n exc 1000 ltrs, setting aside or lowering for repairs, cleaning, etc. and hoisting, reconnecting and re-fixing in position. complete all as as directed by Engr-in-Charge.

M&L for 0.9 mm thick decorative choice of lamination type -1 of surface finish , colour and pattern as approved fixed with adhesive or aral Dite epoxy resin Hetex or fevicol etc as per manufacturers instructions complete all as as directed by Engr-in-Charge.

M&L 10-12mm thick clear toughened glass inluding fixing stainless steel brackets, cleats and fixing accessories for frame less toughened glass fixing in fixed opening as per manufacture's instructions complete all as as directed by Engr-in-Charge.

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover fillets complete all as as directed by Engr-in-Charge.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 02 nos 1.5mm dia double GI suspendor with J type adjustabe adjuster including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

S&F 6-10 mm thick PVC hollow panels with to 0.5 mm plain PVC sheet suitably placed in Wall inclding same and matching colour wall angle , u clip, end elip and jointer . As in ceiling and walls including aluminium frame work fixed to wall or wooden scantling vertically and horizontally at an interval complete all as specified and as directed.

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

Taking down plaster, plaster work for patches, tiling work, filling of cement morter in holes, joints, joinery (wooden/steel) iron/aluminium, pelmet box, etc requiring masonary work and carrying out minor repairs such as patches plaster, tiles, brick, filling etc. including petty repairs material like cement, sand, aggregate, tiles etc. to make it functional complete all as specified and directed. Note: Any items required to be replaced shall be paid under respective items of Sch 'A'/BoQ).

Fixing only in repairs for 4 mm thick E Board decorative type, fixed to timber/ GI/ Aluminium framework in ceiling flat/ sloping complete all as specified and as directed.

M&L for Cutting and polishing only to existing kota stone surface incl filling joints with pigment and cement etc with beeswax polishing complete all as specified and as directed.

S & F louvers /Precast RCC Jalli, 35mm thick (measured solid) including all moulding in PCC 1:2:4 type B0 (using 12.5 graded aggregate) set in cement mortar 1:4 including dismantalingcomplete all as specified and as directed.

S&F in repairs brass decorative type curtain brakets and end cap complete all as specified and as directed.

Providing and laying 12/13mm thick High density Hard wood fibre board (HDF) laminated flooring and skirting of AC-4 class, laid as in tounge and groove/2- joints pattern of specified design and pattern as directed over 50 micron polythene sheet and 2mm thick PVC foam type sheet (EPE packing foam). The door cill shall be finished as per manufacturers specifically design pattern. The material shall be one side wax finished and exposed surface shall be pre- polished design and pattern. The overlapping of each polythene and foam sheel shall be 150mm each side and seperately to each other complete all as specified and as directed.

Checking to sensor based auto flusher concealled type urinal pot sensor incl refixing/ change of battries if required and make functional in all respect complete all as specified and as directed.

S&F Steel rolling shutters 1 mm thick laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete with gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed

S&F Ball bearing for rolling shutters complete all as specified and directed

M&L Pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note :- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate

M&L Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note :- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate.

S&F in repairs bathroom mirror cabinet size of 450 x 350 mm with all necessary fittings complete all as specified and directed. Make- Prayag or equivalent (Cat no.557)

Supply and fix,as in repair, 32/40 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

S&F in repairs stainless steel grating round/ Square cockroach proof with or without hole100/75mm dia complete all as specified and directed.

Application of weather proof exterior emulsion on OH Tank on 21.6 m high staging: M & L for complete removal of existing treatment by grinding the surface before preparation of surfaces of old painted surface by cleaning, rubbing with gunny bags and washing the entire surface with water mixed with bleaching powder and applying one coats of weather proof exterior emulsion paint ( 1st quality) entire surface of old tank columns, beams cross beams above slab, exterior surface of tank. The rate qoated by the contractor include all scaffolding arrangement to carryout the work on exterior surface . The application of paint shall be done with roller only . The contractor shall arrange all safety belt and all other equipment like helmets etc and shall be fully responsible for the safety of the labour. The contractor is advised to visit the site and work out the requirement before quoting the rates. The rate also includes minor repairs required and nothing extra shall be claimed by the contractor Note :- The work shall be got executed by the authorised applicator as per manufacturer instructions.

S&F 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and ditected . Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

M/S SM ENTERPRISE (BID ID -3248281)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3247706)

M/S S S ENTERPRISES (BID ID -3246304)