RE ETENDER MATERIAL SUPPLY FOR MGNREGS WORKS

Amount

Stone Aggregate(Single Size) 40 mm nominal size

Stone Aggregate (single size) 10 mm nominal size

Stone Aggregate(Single Size) 20 mm nominal size

Coarse sand (Zone III)

Portland Cement

Fine sand (Zone IV)

Quarry waste

Royalty for good earth

Stone for Masonry work

Solid blocks of size 30x20x15cm

Solid blocks of size 40x20x10cm

Solid blocks of size 40x20x10cm

Hire charge of 5HP engine and pump set - Materials

Stone Aggregate(single size): 06 mm nominal size

Stone Aggregate(single size): 12.5 mm nominal size

Stone Aggregate(single size):50 mm nominal size

Interlocking C.C. paver block (80 mm thick, M-30) - Bedding layer - 50mm thick

Vibrator (Needle type 40mm)

Hire charges of Concrete Mixer 0.25 to 0.40 mm with Hopper

Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

Galvanised steel corrugated sheets

Galvanised steel J or L hooks 8 mm dia

Mangalore tiles 20 mm thcik

Mangalore ridge tiles 20 mm thick

Precoated galvanised steel plain ridges

Deharadun white lime

Water proofing cement paint

Mild Steel round bar above 12 mm dia

Stone Aggregate(single size):50 mm nominal size

Interlocking C.C. paver block (80 mm thick, M-30) - Bedding layer - 50mm thick

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Vitreous China flat back wash basin 630x450 mm

Vitreous china flat back wash basin 550x400 mm

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Vitreous China orrisa type w.c. pan size 580 mm

Coloured Orissa pattern W.C. pan 580x440 mm

Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia - Pipe 15 mm outer dia

Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia - Add 75% for fittings, clamps and wastage etc.

Polyethylene water storage tank with cover and suitable locking arrangemnet

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

PVC pipe 63 mm outer dia. 4 kgf/cm2 - (5% added for wastage etc)

PVC Elbow 63 mm dia

PVC bend 63 mm dia

PVC Tee 63x63x63 mm dia

PVC end cap 63 mm dia

PVC Socket/coupling 63 mm dia

PVC Reducer 63x50 mm dia

Galvanised wire mesh of average width of aperture 1.4 and nominal dia.of wire 0.63 mm

Wire nails

PVC Pipe 50mm Outer Dia 6kgf/cm2

Bitumen washer

Precoated GI Traffored sheet 0.350 mm thick

Precoated Aluminium Traffored sheet 0.450 mm thick

Pincoda wood scantles 50x25mm

Anjali wood scantles 50x25mm

Twisted steel bar/deformed bar

G.I. pipes 40 mm dia

G.I pipes 50 mm dia

G.I. pipes 25 mm dia

450 mm dia R.C.C. pipe

500 mm dia R.C.C. pipe

600 mm dia R.C.C. pipe

PVC Plain roofing sheets

Mild steel sheets for tanks

Mild steel plate

Structural steel such as tees,angles,channels and RS Joists

Pulley 25mm dia

G.I pipe 40mm

Brick tiles

Mild steel tubes hot finished welded type

Mild Steel round bar above 5 mm dia

Welding by electric plate

Red oxide zinc chomate primer

GI plain washer

Solid blocks of size 30x20x20cm

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Adjustable span ESO+SI (2.35-3.40)

Second class kail wood in planks

Second class kail wood in scantling

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Vitrified floor tile 60x60 cm

Premium acrylic emulsion of interior grade, having VOC content less than 50 gm/litre

Acrylic exterior paint

Exterior primer

Epoxy paint

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

PVC pipe 20 mm outer dia 10 kfg/cm2

PVC pipe 32 mm outer dia. 10Kgf/cm2

PVC pipe 40 mm outer dia. 10kgf/cm2

PVC pipe 110 mm outer dia. 4kgf/cm2

Iron pintels including weldded pin

Mild steel sheets with bolts and nuts to rest on pintels

Mild steel hooks

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Bright finished or black enameled mild steel screws 40 mm

Mild steel tubes electric resistant or induction butt welded

Mild steel round bar 12 mm dia and below

Flats up to 10 mm in thickness

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)