Electrical utility shifting and UG cable conversion as part of the construction of road widening of a preparatory works of Phase-II from Palarivattom bypass junction to Vazhakkala Metro station-Package II

Supply of HDPE pipe confirming to PN4 as specified the size given below, laying of HDPE pipe properly and continuously joined and laying as per specification . 110mm

Supply at the site of work of 11kv HT, XLPE insulated, armoured, Aluminium conductor cable as per IS 7098/part-ll /1985 with up to date amendment & specified in the specification of the sizes given below, laying of cables in HDPE pipes in all areas, all type of soil ,footpath,road ,etc by (open trench) excavation with laying arrangement in sand cushionn and brick/Tile protection at required depth ,refilling and restoration after laying of cables through pipe as required/approved by utility owning agency , Testing and commissioning of cable as required as per standards and directions of officers. 11Kv XLPE 3x300sqmm

Supply at the site of work of 11kv HT, XLPE insulated, armoured, Aluminium conductor cable as per IS 7098/part-ll /1985 with up to date amendment & specified in the specification of the sizes given below, laying of cables in cable duct including conveying cable from Sub Regional Store/stacking place to work site and cable duct slab opening and closing , laying it carefully using cable rollers and core cutting of cable duct for cable entry/exit ,after laying of cables through cable duct as required/approved by utility owning aegncy, restoration of core cutting with proper finishing,testing & comissioning of cable et complete as required as per standards and directions of officers. 11Kv XLPE 3x300sqmm

Supply at the site of work of 11kv HT, XLPE insulated, armoured, Aluminium conductor cable as per IS 7098/part-ll /1985 with up to date amendment & specified in the specification of the sizes given below, laying of cables in all type of soil ,footpath,road ,etc(open trench) by excavation with laying arrangement in sand cushionn and brick/Tile protection at required depth , refilling and restoration after laying of cables and testing & commissioning of cable et complete as required as per standards and directions of officers. 11Kv XLPE 3x300sqmm

Supply at the site of work of 1.1kv LT, XLPE insulated, armoured, Aluminium conductor cable as per IS 7098/part-l /1988 with up to date amendment & specified in the specification of the sizes given below, laying of cables in HDPE pipe in all areas, all types of soil, footpath,road etc(open trench) by excavation with laying arrangement in sand cushion and brick/tile protection at required depth and refilling after laying of cables through pipes as required/ approved by utility agency, including supply & doing HS type end termination ,including cable mounting and connecting with cable clamps,bolt,nuts,terminal protectors etc , testing & commissioning of cable et complete as required as per standards and directions of officers. 1.1Kv 3.5x185sqmm

Supply at the site of work of 1.1kv LT, XLPE insulated, armoured, Aluminium conductor cable as per IS 7098/part-ll /1985 with up to date amendment & specified in the specification of the sizes given below, laying of cables in cable duct including conveying cable from Sub Regional Store/stacking place to work site and cable duct slab opening and closing , laying it carefully using cable rollers and core cutting of cable duct for cable entry , after laying of cables through cable duct as required/approved by utility owning aegncy, including supply & doing HS type end termination,including cable mounting and connecting with cable clamps,bolt,nuts,terminal protectors etc restoration of core cutting with proper finishing, testing & comissioning of cable et complete as required as per standards and directions of officers. 1.1Kv 3.5x185sqmm

Supply ,at the site of work of 1.1kv LT, XLPE insulated, armoured, Aluminium conductor cable as per IS 7098/part-I/1988 with up to date amendment & specified in the specification of the sizes given below, laying of cables in all types of soil, Open cable trench, footpath, road etc., by excavation with laying arrangement in sand cushion and brick/Tile protection at required depth , refilling and restoration after laying of cables as required/approved by utility agency, including supply & doing HS type end termination,including cable mounting and connecting with cable clamps,bolt,nuts,terminal protectors etc , and testing & commissioning of cable et complete as per standards and directions of officers. 1.1Kv XLPE 3.5x185sqmm

Supply ,Drawing of 11kv Aerial bunch cable of size 3x150 + 1x120(Insulated messenger) with suitable Anchor clamp/dead clamp,suspension clamp,surge arrestor,TEE/straight through joint,termination joint,cable ties,spiral earthing set,earth connector,fitting cross arms,stainless steel strap and buckle etc using 11kv Aerial bunch cable of size 3x150 + 1x120(Insulated messenger) including cutting and removing tree branches wherever necessary and conveyance of all materials from stacking place.at the site of work and testing & commissioning of Aerial bunch cable etc complete as required as per standards & specified in the specification of the below size 11 kV Ariel bunched cable XLPE insulated of size 3 x 150+ 1 x 120 sqmm with bare/insulated Messenger

Supply ,laying of 1.1kv Aerial bunch cable of size 3x150 + 1x120(Insulated messenger) with suitable Anchor clamp/dead clamp,suspension clamp,surge arrestor,TEE/straight through joint,termination joint,cable ties,spiral earthing set,earth connector,fitting cross arms,stainless steel strap and buckle etc using 1.1kv Aerial bunch cable of size 3x150 + 1x120(Insulated messenger) including cutting and removing tree branches wherever necessary and conveyance of all materials from stacking place.at the site of work of 1.1Kv Aeriel Bunched cable as per IS & specified in the specification of the below size. 1.1Kv Aeriel bunched cable XLPE insulated of size 3x95(For phase) + 1x70(insulated messenger nuetral) + 1x16(street light) sqmm.

Supply, Making testing & commissioning of complete Heat shrinkable type indoor/ outdoor type and end termination as specified in the specification including provision of laying,dressing, Tagging,Glanding with Lugs/ferrules for termination of 11kv HT XLPE insulated cable including making holes in the switch board, clamping supporting complete as required by utility owning agency following sizes and as per standards and directions of officers. Additional loop of cable should be made before end termination on the structure/Ground 11kv H S type 3x300 sqmm

Supply making testing & commissioning of 11kv HT XLPE cable complete Heat shrinkable type straight through joint as per direction of officer 11kv H S type 3x300 sqmm

Supply ,Erection ,Testing and Commissioning of SCADA compatible outdoor both side extensible type ring main unit with CCT type for replacing tapping DP structure of HT circuits, and on RCC 1:2:4 foundations using foundation bolts and including cost of in-built-metering panel with battery charger ,provision of L/R switch,remote gas pressure monitoring ,fault passage indicator and 11kv HS type end termination etc complete including cost of all materials and labor, as per standards and directions of officers.

Supply ,Erection ,Testing and Commissioning of SCADA compatible outdoor both side extensible type ring main unit with CCC type for replacing tapping DP structure of HT circuits, and on RCC 1:2:4 foundations using foundation bolts and including cost of in-built-metering panel with battery charger ,provision of L/R switch,remote gas pressure monitoring ,fault passage indicator and 11kv HS type end termination etc complete including cost of all materials and labor, as per standards and directions of officers.

Supply ,Erection ,Testing and Commissioning of SCADA compatible outdoor both side extensible type ring main unit with CCCT type for replacing tapping DP structure of HT circuits, and on RCC 1:2:4 foundations using foundation bolts and including cost of in-built-metering panel with battery charger ,provision of L/R switch,remote gas pressure monitoring ,fault passage indicator and 11kv HS type end termination etc complete including cost of all materials and labor, as per standards and directions of officers.

Supply ,Erection ,Testing and Commissioning of SCADA compatible outdoor both side extensible type ring main unit with CCCC type for replacing tapping DP structure of HT circuits, and on RCC 1:2:4 foundations using foundation bolts and including cost of in-built-metering panel with battery charger ,provision of L/R switch,remote gas pressure monitoring ,fault passage indicator and 11kv HS type end termination etc complete including cost of all materials and labor, as per standards and directions of officers

Supply ,Erection ,Testing and Commissioning of SCADA compatible outdoor both side extensible type ring main unit with CCCCT type for replacing tapping DP structure of HT circuits, and on RCC 1:2:4 foundations using foundation bolts and including cost of in-built-metering panel with battery charger ,provision of L/R switch,remote gas pressure monitoring ,fault passage indicator and 11kv HS type end termination etc complete including cost of all materials and labor, as per standards and directions of officers.)

Supply ,Erection ,Testing and Commissioning of SCADA compatible outdoor both side extensible type ring main unit with CCCTT type for replacing tapping DP structure of HT circuits, and on RCC 1:2:4 foundations using foundation bolts and including cost of in-built-metering panel with battery charger ,provision of L/R switch,remote gas pressure monitoring ,fault passage indicator and 11kv HS type end termination etc complete including cost of all materials and labor, as per standards and directions of officers.

Supply and erection testing and commissioning of SCADA compactible outdoor Extensible type ring main unit, ADD ON Module RMU - Type - +C+ consists of 1nos Load Break switches with complete coupling accessories for replacing tapping DP structure of 11kv HT circuits and on RCC 1:2:4 foundations using foundation bolts and including cost of 11KV HS type end termination, Earthing, coupling with existing RMU etc complete including cost of all materials and labor, as per standards and directions of officers.

Supply and erection testing and commissioning of SCADA compactible outdoor Extensible type ring main unit, ADD ON Module RMU - Type - +V+ consists of 1nos Vaccum circuit breaker with complete coupling accessories for replacing tapping DP structure of 11kv HT circuits and on RCC 1:2:4 foundations using foundation bolts and including cost of 11KV HS type end termination, Earthing, coupling with existing RMU etc complete including cost of all materials and labor, as per standards and directions of officers.

Fitting including supply of material one Fuse unit (one no.) and giving connection from Transformer to fuse units and fuse units to LT OH line.

Dismantling (taking out from ground) if necessary all sizes of XLPE cable/Pilca/ Pvc cables, without damaging the cable. By excavation in all types of area (all type of soil) with refilling excavated Trenches as per standards and directions of officers. This also includes handling over of dismantled cable (if not relayed) to concerned utility agency.(including Transportation)

Dismantling (taking out from tarred road and concrete surface) if necessary all sizes of XLPE cable/Pilca/ Pvc cables, without damaging the cable. By excavation in all types of area with refilling excavated Trenches as per standards and directions of officers. This also includes handling over of dismantled cable (if not relayed) to concerned utility agency.(including Transportation)

Dismantling (without damage) LT3 phase 4/5 wire OH line including existing stucture ,stay,strut,cross arms,insulators, etc...and transportation and stacking of all materials at suitable locations as per instructions including digging out loading and unloading on to lorries without damaging the materials.This also includes handling over of materials to concerned utility agency.(including Transportation)

Dismantling (without damage) HT lines(3 conductor) including existing stucture ,stay,strut,cross arms,insulators, etc...and transportation and stacking of all materials at suitable locations as per instructions including digging out loading and unloading on to lorries without damaging the materials.This also includes handling over of materials to concerned utility agency.(including Transportation).

Dismantling and shifting of RMU at various locations and re- erecting, including foundation works ,Providing 11kv HS type end termination ,looping of cable etc and earthing complete as required as per standards and directions of officers.

Dismantling existing Transformer,DP/transformer Structure posts, etc of Transformer installation and transportation and stacking of all materials at suitable location as per instruction of officer including digging out loading and unloading on to lorries, etc of poles Transformers, and materials without damaging the same.Erecting the transformer on the new constructed plinth/DP structure including DTR meter and giving connections,fittings etc complete as per standards and directions of officers excluding cost of plinth.

Dismantling existing DP Structuress using A-pole /PSC pole as per instruction including digging out of poles , and materials without damaging the same including digging out,loading and unloadind and staking in suitable location.This also includes handling over of materials to concerned utility agency.(including Transportation)

Dismantling existing DP Structuress using A-pole /PSC pole as per instruction including digging out of poles , and materials without damage and reerecting the DP structure with the same materials at near by location as instructedby the officer.

Dismantling one LT PSC/RCC/RS Joists/TW pole,fittins,service connections etc including digging out and back filling pit .This also includes handling over of materials (if not relayed) to concerned utility agency.(including Transportation).Dismantling the existing street light fixtures with all accessories and erecting in nearest LT/HT poles as per KSEB standard and directions of officer

Dismantling one 11 kv A- pole/HT PSC/RCC/TW including accessories,fittings etc and This also includes handling over of dismantled cable (if not relayed) to concerned utility agency.(including Transportation)

Supply and erection at site LT/RSJ/PSC/RCC poles at site of required height including foundation digging and back filling with fittings including x-Arms and clamps / insulator,stay and including concrete muffing all materials cable loop In-loop-out as per standard and direction of officers

Supply and erection at site HT/RSJ/PSC/RCC poles at site of required height including foundation digging and back filling with fittings including x-Arms and clamps / insulator,stay and including concrete muffing all materials cable loop In-loop-out as per standard and direction of officers

Supply and erection one A-pole (painted MS) at site of required Height including foundation and fittings , crossarms ,insulator,cable looping ,diggingand back filling pit,stay,earth leads including concrete muffing all materials as per standards and direction of officers.

Supply and erection one DP/Transformer structure using A-pole(painted MS) at site of required Height including foundation and AB switch, lightning arrestor, fittings, crossarms, insulator, cable looping, digging and back filling pit, earth leads and earthing including concrete muffing all materials as per standards and direction of officers.

Providing Strut using LT pole including digging and back filling pit( taken from the dismantled items).

Providing earthing for poles and support, pillar boxes panels, structures, Transformers,RMU's etc including supply of materials, Excavation, giving connection, laying lead wire, etc complete using 40mm Gi pipes 3mt long and Gi wires of size up to No.6 SWG.

Constructing Transformer plinth foundation(Cement concrete column)inclusive of cost of all materials (as per specification).

Dismantling and reconnecting S ph service connection required from the OH line incl..lower down the WP portion

Dismantling and reconnecting 3 ph service connection required from the OH line incl..lower down the WP portion