Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-AOC AL AMEEN MANZIL THELLAKOM P O KOTTAYAM | KOTTAYAM | KERALA | 686001 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹6.7 L+₹8,796.40 (1.32%)Rejected-AOC | L2 | Rejected-AOC Second Lowest bidder | |
| 3 | L3₹6.9 L+₹29,319.93 (4.41%)Rejected-AOC | L3 | Rejected-AOC Third lowest bidder | |
| 4 | L4₹6.9 L+₹29,381.23 (4.42%)Rejected-AOC KOLATH NILAPOLA P O | KERALA | L4 | Rejected-AOC Fourth lowest bidder | |
| 5 | L5₹7.4 L+₹76,382.32 (11.5%)Rejected-AOC | L5 | Rejected-AOC Fifth lowest bidder |
Tender Value
₹6.9 L
EMD Value
₹10,404
Closing Date
19 Nov 2021, 5:00 pmClosed
Assistant Executive Engineer
PWD Building Sub Division Kottayam
To construct a deck facilities to the election Deputy Collectors office .The provisions included in the estimate are Structural steel work , GI tubes , marine plywoods , painting and ceiling with gypsumboard etc.
2021_PWD_452560_1
TR/BL/2019/7044/1
Open Tender
Civil Works - Buildings
Item Rate
90 days
Civil Station Kottayam
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,530
₹10,404
15 Dec 2021
10 Nov 2021
22 Nov 2021
10 Nov 2021
19 Nov 2021
10 Nov 2021
Amount
Details of work
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work
10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
9.126.1:Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick.Marine plywood conformingto IS : 710
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
od57660/2019_2020/BL:Providing and fixing Pre-laminated medium density fibre board exterior (grade -1 )IS:14587:1998 marked, with decorative lamination on both side , Grade-I (exterior grade) in cubicles, work stations and shelves with screws and fittings wherever required, ( frames , backing , studding and fittings to be paid separately). Pre-laminated with decorative lamination on both sides Exterior Grade-I MDF Board 18mm thick confirming to IS:14587.
9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm
9.106.1:Providing and fixing PTMT handles with necessary screws etc. complete.125x34x24 mm weighing not less than 23 gms
9.112:Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.
9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.
21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness
od37967/2019_2020/BL:Engaging Man coolies for cleaning the site.
17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
50.18.8.7.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2
Sabumon Lukose
Thomas Chacko
JACOB GEORGE
Robin Joseph
Bidder Name
Sabumon Lukose
JACOB GEORGE
Najeeb K Y
Thomas Chacko
Robin Joseph
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_646798.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .