Channelization of Nala

Amount

Excavation in foundation, trenches etc., in earth work,in all lift and lead upto stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm, layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with , all kind of soil .For B/wall

Stone soling property hand-packed filling interstices with spells and consolidating with power road roller to the required gradient and camber including spreading watering and rolling of binding materials moorum or earth etc.100 mm spread thickness

Providing and laying cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth.

Providing and laying cement concrete 1:5:10 ( 1 cement 5 sand 10 graded stone aggregate 40mm nominal size) with 15 % plump and curing complete, excluding the cost of form work in retaining wall Brest wall ,the size of plump shall usually be 150mm to 300 mm. as per H.P.P. W. D. Specification.

Providing and laying cement concrete 1:2:4(1cement: 2sand: 4graded stone aggregate 20mm nominal size) and curing complete excluding cost of For flooring.

Providing form work with steel plates 3.15mm. Thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: - Flat surface such as soffits of suspended floors, roofs, landings and the like. Floors etc. up to 200mm. in thickness. Slab

Providing mild steel/Tor steel reinforcement for R.C.C work including bending, binding and placing in position complete up to floor two level: Tor Steel:

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying Priming coat of red lead paint. In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and Cross beams, hip and jack Rafters, purlins connected to common Rafters and the like. I. C. Chamber

Random rubble masonry /polygonal rubble masonry concourse/brought to courses)with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6 (1 cement :6 sand) at plinth level & Super structure above plinth up to floor two level.

Karun Verma Govt Contractor

Devender kumar