Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.6 LAccepted-AOC | L-1 | Accepted-AOC Lowest | |
| 2 | L-2₹25.5 L+₹97,397.95 (3.96%)Rejected-AOC | L-2 | Rejected-AOC Other than Lowest | |
| 3 | L-3₹28.2 L+₹3.6 L (14.7%)Rejected-AOC YADIPORA PHALHALLAN TEH PATTAN DISTT BARAMULLA J K | PATTAN | BARAMULLA | JAMMU AND KASHMIR | 193121 | L-3 | Rejected-AOC Other than Lowest | |
| 4 | L-4₹31.4 L+₹6.9 L (27.9%)Rejected-AOC | L-4 | Rejected-AOC Other than Lowest | |
| 5 | L-5₹32.2 L+₹7.6 L (31.1%)Rejected-AOC | L-5 | Rejected-AOC Other than Lowest |
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
25 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
CERTAIN REPAIR/ PETTY REPAIR IN ZONE I AND II AT PATTAN UNDER GE 969 EWS
2023_MES_579084_1
CANO 969/WS- /2022-23
Open Tender
Civil Works
Item Rate
180 days
Pattan
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE 969 EWS
₹59,000
Yes
21 Mar 2023
4 Feb 2023
27 Feb 2023
4 Feb 2023
25 Feb 2023
20 Feb 2023
Amount
Demolition of cement concrete(unreinforced) in ground floors and paving not exceeding 15 CM thickness (below or above ground level) complete all as specified and as directed.
M&L for 25 mm thick PCC type B1 (1:2:4) using (20 mm graded agg) as in flooring complete all as specified and as directed.
M&L for 75 mm thick PCC 1:4:8 type C-2 using (40 mm graded aggregate) as in sub base complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement.complete all as specified and directed.
M&L for non skid coloured printed ceramic tile 8 to 10 mm thick (Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
M&L Cement concrete in foundations, filling and mass concrete 1:3:6 type C-2 using (40 mm graded aggregate) thick complete all as specified and as directed.
M&L Sand filling under floors or in foundations including watering and consolidation.complete all as specified and directed.
M&L Machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to 1S 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pegment .complete all as specified and directed.
M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).Complete all as specified and as directed.
S&F Heavy Duty Dura paved chequered tiles (vitrified) 30 CM x30 CM x 8 to 10 mm thick set jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in CM (1:6) finished with colour cement to match the shed of the slab complete all as specified and as directed.
Dismanting floor hearth wall tilling including CM bedding, removing serviceable tiles to store and rubbish of the permishes complete all as specified and as directed.
M&L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4).Complete all as specified and directed.
Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in CM complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 .complete all as specified and directed
M&L Walling of random rubble well bonded, bedded and solidly hearted, uncoursed built in CM (1:6) complete all as specified and as directed.
Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc. Complete all as specified and as directed.
M&L For Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement .complete all as specified and directed.
Preparation of plastered New surfaces walls and applying two coat of white wash complete all as specified and directed
Preparation of undecorated surfaces of old surfaces walls Washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of white wash.complete all as specified and directed.
S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling. Complete all as specified and as directed.
Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work complete all as specified and as directed.
M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section complete all as specified and as directed.
Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets any thickness inlcuding cover fillets complete all as specified and as directed.
S&F 6 mm thick insulation consisting of PVC Insulated Panels as in wall having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing. Note: Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)
S&F 6 mm thick insulation consisting of PVC Insulated Panels as in ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing. Note: Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)
M&L 4 mm thick Plywood on wall grade BWP,type BB, fixed with nails to timber frame work complete all as specified and as directed.
M&L 4 mm thick Plywood in ceiling, grade BWP,type BB, fixed Work with nails to timber frame complete all as specified and as directed.
M&L of 6 mm thick veneered decorative plywoode, grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work complete all as specified and as directed.
M&L of 6 mm thick veneered decorative plywoode, grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work complete all as specified and as directed.
M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean Swan secured with nails not exc 3 Sqcm in section. Complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coataing Gl based profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screw incl dismantling of existing sheets. Complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of existing sheets. Complete all as specified and directed.
S&F galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screw and washers in roofs, walls etc incl dismantling of existing sheets. Complete all as specified and as directed.
S&F 80 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 gm incl dismantling of existing sheets. Complete all as specified and directed.
All as per above item No. 34 but except sheeting removing and refixing in repair
M&L two coat of red oxide including preparation of new steel Surfaces of any description, over 10 CM in width or girth, not otherwise described .Complete all as specified and directed.
M&L one coat of synthetic enamel paint including preparation of old steel Surfaces of any description, over 10 CM in width or girth, not otherwise described complete all as specified and directed.
Taking down of Shutters of any description n exc 1 sqm each complete all as specified and as directed.
Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.
Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm complete all as specified and as directed.
Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm .complete all as specified and directed.
S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
S&F Plain, framed, panelled shutters thickness 35 mm of 2nd class softwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.
S&F Glazed and skeleton shutters thickness 30 mm, (2nd class softwood), open rebated and prepared to receive glass.gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b) complete all as specified and as directed.
S&F Door closer hydraulically regulated cost iron body designation No 1 universal type suitable for door shutters up to 700 mm in width and of weight not more than 35 kgs complete all as specified and as directed.
S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed complete all as specified and as directed.
S&F Aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. Complete all as specified and as directed.
S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel complete all as specified and as directed.
S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed.
S&F Aluminium handles 100 mm , cast type, anodised complete all as specified and as directed.
S&F Aluminium handles 150 mm , cast type, anodised complete all as specified and as directed.
S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Complete all as specified and directed.
M&L two coats of synthetic enamel paint over a coat of pink primer including preparation of surface on new wooden surface over 10 CM width or girth . Complete all as specified and as directed.
Dismanting boarding, any description, fixed in any position with nails. Complete all as specified and directed.
S&F Softwood 2nd class Clean sawn with butt joints eaves boards 20 mm thick complete all as specified and as directed.
M&L 2nd Class Soft Wood Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed. Complete all as specified and directed.
S&F 2nd Class Soft Wood Planed one side & edges tongued and grooved or rebated, with nails Complete all as specified and directed.
M&L two coats of synthetic enamel paint including preparation of surface on old wooden sruface over 10 CM width or girth complete all as specified and as directed.
Taking down and replaced with 15 mm bore Gl water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilings ,complete all as specified & directed.
Taking down and replacement 20 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain &brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors, complete all as specified and as directed.
Taking down and replacement 25 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors, complete all as specified and as directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, walk ways, ralings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.
S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.
M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 Itrs to 500 Ltrs complete all as specified and as directed.
S&F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or buttefly handle fancy type, screwed both ends for iron pipe or for unions and fixed chromium plated complete all as specified and as directed.
S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe. complete all as specified and as directed.
S&F in repairs for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule. complete all as specified and as directed.
S&F in repair stop valves fancy type chromium plated screwed down high presure, with crutch or butterfly handle, cscrewed both ends for iron pipe or for unions 15 mm bore complete all as specified and directed.
S&F in repairs Vitreous China squatting pan, 'Orissa' pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 CM long. .complete all as specified and directed.
S&F in repair vitreous china wash basin with stopper, white flat back size 550x400 mm plug, porcelain incl brackets with waste fittings and connection pipe etc including pedestal complete all as specified and as directed.
S&F in repairs PVC flushing cistern, 10 Itrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings. Complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white or coloured excluding flushing cistern and incl flush pipe seat cover incl provision of concrete/ white cementing and P or S trap complete all as specified and as directed.
S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to Gl tubbing. Complete all as specified and directed.
S&F Sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane including hacking out old broken glass. Complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail 20 mm dia D type 60 mm long between flages . Complete all as specified and directed.
S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 CM wide with brass chromium plated bracket guard complete all as specified and as directed.
S&F in repairs Brass CP wall mixer 15 mm for mixing hot & cold water screwed down for lron pipe and fixed complete all as specified and as directed.
S&F in repairs curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc.complete all as specified.
S&F in repairs Rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkat. complete all as specified and directed.
S&F in repairs Vitreous China Wall Hung coupled closet including cistern with lid dual flush fitting with PVC seat cover size not less than 665x360X765 mm (white) including fixing bolt and accessories complete all as specified and as directed.
S&F in repairs CP health flucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position completed in all respected as specified.
S&F in repairs CP jet spray with flexible tube 1.5 mtr long complete all as specified complete all as specified and directed.
S&F in repair PP-R gate valves 32mm dia (brass insert) as per requirement of the site. complete all as specified and as directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms). complete all as specified and directed.
S&F in repairs Vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe .complete all as specified and directed.
S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire width and average of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F in repairs 20 mm Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified and as directed.
S&F in repairs Brass CP basin mixer 15 mm for mixing hot & cold water screwed down for lron pipeand fixed complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.
S&F in PVC (SWR) junction single T equal or unequal 110 mm dia complete all as specified and as directed.
S&F PVC (SWR) bends 110 mm dia fixed complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.
S&F in PVC (SWR) junction single T equal or unequal 75 mm dia. complete all as specified and as directed.
S&F PVC (SWR) bends 75 mm dia fixed. complete all as specified and as directed.
M&L Creosote oil incl preparing surfaces of wood and wood based materials, and wood based materials, new or old, of any description and girth, not otherwise described and treated with. Complete all as specified and as directed.
Note :- Schedule of credit Rs. 92,825.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
M/S BILAL CONSTRUCTION AND CO
M/S MANZOOR AHMAD YATOO
M/S HAJI MOHD ASHRAF SUMJI
M/S MUKHTAR CONSTRUCTION CO
M/s Shabir Ahmed Mir and Bros
M/S NISAR AND CO
M/s MOHD YAQOOB KHAN & CO
M/S DAR ELECTRICALS
ALI MOHD NAJAR
M/s FAYAZ AHAMD WANI AND SONS
HAYAT TRADING CORPORATION
M/S ANUSHA ENTERPRISES
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .