Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹2.7 L+₹11,458.83 (4.36%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹3.0 L
EMD Value
₹7,445
Closing Date
31 Oct 2022, 5:00 pmClosed
Assistant Executive Engineer
PWD Buildings subdivision Thevally Kollam
General maintenance of quarter D1 in GO quarters at Thevally,Kollam general civil works
2022_PWD_518585_1
ET-33/AEE/KLM/2022-2023
Open Tender
Civil Works - Buildings
Item Rate
120 days
kollam
Please refer Tender documents.
9 documents required · 9 mandatory
₹660
Yes
₹7,445
Yes
20 Dec 2022
20 Oct 2022
3 Nov 2022
20 Oct 2022
31 Oct 2022
20 Oct 2022
Amount
D1 GO quarters
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface
14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work
17.10.1.1:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board510x1040 mm bowl depth 250 mm
17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White
17.20.3:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:Cloured (other than black & white) solid plastic seat with lid
17.28.2.2:Flexible pipe40 mm dia
18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore
18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
OD93989/2022-2023:Providing and fixing 15mm CP brass pillar taps.
OD151091/2022-2023:CP rectangular shower with arm combo
OD93992/2022-2023:Engaging Plumber
OD93993/2022-2023:Engaging Scavenger.
OD93994/2022-2023:Providing and fixing floating valve for water tank.
OD93996/2022-2023:Engaging Carpenter(2nd class)
OD147966/2022-2023:Supplying and fixing of PVC hollow laminated bathroom door of good quality single panelled section including cost of all fittings such as butt hinges ,tower bolt ,handles ,conveyance ,fitting charges etc.
OD94030/2022-2023:Supplying and fixing of openable(hinged) aluminium Mosquito net(best quality) with Aluminium powder coated frame of size 25.4x19.05x1.65mm rubber beading Al hinges25mm steel screws, handles etc. including fabrication and fitting charges etc.
OD94125/2022-2023:Supplying and fixing of aluminium mosquito net best quality with 25mm steel screws etc including fabrication and fitting charges etc.
OD93998/2022-2023:null Engaging wood cutter
OD94000/2022-2023:Roofing with Dept. MP tiles
50.9.13.1:Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete .
50.9.14.1:Supplying and fixing Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete.
OD94401/2022-2023:Fixing existing reapers firmly to the rafter using nails including labour etc complete
OD94402/2022-2023: null Fixing Deptl. M.P hip tiles set in cement mortar 1:6 including finishing the edges etc. copmlete
OD94001/2022-2023: Cleaning old roof tiles
OD94002/2022-2023: Supplying and stacking M.P roofing tile
OD94003/2022-2023:Supplying and stacking M.P Hip tile
OD151716/2022-2023:Cleaning fully shabby ceramic wall/floor tile using cleaning solution or acid base
OD94005/2022-2023:Engaging mancooli.
15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop
50.9.15.4:Providing and fixing iron hooks and eyes: 150 mm
AZEEZKUTTY
Bidder Name
AZEEZKUTTY
FIROSKHAN H
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_744436.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .