HPSEBL/AMD/DB-8/2025-26-069

Dismentling/Demolition of all the old Sanitary fittings 1 no toilet (i.e. 1 no.WC, with cisten & WB with all accessories, connections pipes , angle valves, shower, bib cocks, GI mild tubes, CI pipes and all other accesseries of Sanitary in the toilet.) (All C.P./Metal Scrap will be credicted)

Dismentling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 400 metres lead, for thickness of tiles above 25 mm and upto 40 mm for toilet/bath room at barrage site.

Dismentling damaged angle, channel, MS sheet, chequered plate and woven GI mesh at Toilet & behind of the intake gate - 4 with the help of gas cutting/welding over intake gates pateform and repair of damaged parts of plateform & tightening of loose GI mesh and other misc. works as per direction of the site in charge.

Steel work welded in built up sections truses and framed work including cutting, hoisting, fixing in position and applying a priming coat fo red lead paint in beams, joists, channels, angles,tees,flats with connection plates or angle cleats as in main and cress beams, hip and jack rafters, purlins connected rafters and the like.

Excavation in foundations, trenches etc. in earth work, lift upto 1.50 mtr, stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required into plinths sides of foundations etc., consolidated each deposited layer by ramming and watering and then disposing of all lsurplus excavated earth as directed with in a lead of 20 metres in pick work/junmper work.

Supplying and fixing woven plains GI wire fencing of mesh 50 mm to 150 mm to any type of standard rails, straining bolts etc. including provision of binding wire, staples etc.

Painting two coat (excluding priming coat) on new steel and other metal surfaces with readymixed plaint brushing finishing oil glossto give an even shade including cleaning the surface of all durt, dust and other foreign matter with readymixed paint other than white.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and fixing high pressure PVC spigot and socket,wastè and ventilating pipes ISl marked including fixing with approved adhesive etc.complete. (i) 110 mm dia

(ii) 90 mm dia.

Providing and fixing PVC plain bend ISI marked complete including fixing with approved adhesive etc. complete. (i) 110 mm dia

(ii) 90 mm dia.

Providing and fixing PVC plain Tee ISI marked including fixing with approved adhesive etc. complete . (i) 110 mm dia

(ii) 90 mm dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 90mm . (i) 110 mm dia

(ii) 90 mm dia.

P/F PVC floor trap ISI marked on self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etc. Complete .110 x 90 mm

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer, waste coupling 32 mm dia and pedestal. (Cera Make)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked White solid plastic seat and lid (Cera Make)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore (Cera Make)

Providing and fixing white vitreous china flat back half stall urinal of size 340x280x470 mm with C.P. brass angle cock( press type , with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Providing and fixing CP brass soap Dish of approved quality. (Cera Make)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and marking necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing brass C.P. brass bib cock of approved quality conforming to IS: 8931 : 15 mm nominal bore (Cera make)

Providing and fixing CPVC ball valve of approved quality; High or low pressure complete 25 mm nominal bore.

Wall painting two coats with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter, sand papered smooth including applying of putty as required for metling the surface.

Demolition below G.L. upto 1.5 m depth including stacking of serviceable material and disposal of unserviceable material within 20 m lead and including cutting the necessary reinforcement and separating from R.C.C. / R.B. work.

Soling/Boulder filling dry hand packed tightly as in wire crate apron bond.

Providing and laying cement concrete flooring 1:2:4(1 cement:2 sand:4 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work in

Note: The rates are inclusive of all taxes i.e. GST, Labour Cess, Taxes, royalty etc. as applicable