CERTAIN SPECIAL REPAIRS AND MINOR WORKS UNDER AGE BR II AT IMA DEHRADUN

Amount

Excavation in trenches n. exc 1.5m wide and n. exc 1.5 min deapth for foundation or for shaft etc n. exc 10 sqm on plan and n.exc 10Sqm in depth and getting out in soft/ loose soil complete all as specified & directed.

All as per item no 1 above but depth exc 1.5 m and not exeeding 3m.

Returning, Filling in, in trenches excavated soil including spreading leveling, watering and well ramming in layers not exc 25cm thick in soft/ loose soil complete all as specified & directed.

Removing excavated materials (soils) n.exc. 50m and depositing where directed at a level n.exc. 1.50 m above the starting points complete all as specified & directed.

Demolition and breaking up 150 mm bore drain pipes (salt glazed stone ware/RCC) set in cement mortor complete all as directed.

M&L for salt glazed stone ware drain pipes,bore of pipe150mm,Grade 'A' laid in trenches and jointed in cement mortar (1:1) with spum yarn and tested complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation bed to drain pipes of 150 mm bore, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified & directed.

Demolition and breaking up 200 mm bore drain pipes (salt glazed ware,AC,RCC, ) set in cement mortor all as specified and directed.

M & L for Reinforced drain concrete cement pipes, 200 mm dia class NP-3, laid and jointed complete with collars in cement mortar (1:1) with spum yarn and tested complete all as specified.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation bed to drain pipes of 200 mm bore, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified & directed.

M &L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in drain,coping,beds channel benching of manhole laid to slope and shape as required complete all as specified and directed.

Extra for forming fair finish drain or channel 30 Cm inner girth in cement concrete using extra cement complete all as specified and directed.

M& L for Rendering 10 mm thick on fair face of brickwork or concrete surface in cement mortar (1:4)using WPC and finishing the surface even smoothg with using extra cement. (Note : WPC shall be measured & paid separately as supply only).

M& L for Rendering 15 mm thick other than fair face of brickwork in cement mortar (1:6 )and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) in foundation / manhole ,filling and mass concrete all as specified and directed.

M &L for brick work with sub class 'B' Bricks straight or cureved on plan exc. 6 mtr mean radius built in cement mortar (1:4).including demolition of exsiting brick work complete all as specified and directed

M & L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone agg) in coping ,Bed plates etc. all as specified and directed.

M&L for precast RCC cover slab type (1:2:4) B-1 (using 20mm graded stone agg) set in cement mortar (1:4). complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately.

M&L for TMT bar 10 mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns and binding with and including mild steel wires (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M&L for Treating small article with two coat of tar of coal tar n. exc 10 Sqm each complete all as specified.

S&F MS work in smal articles such as handle of manhole covers and rungs etc complete all as specified.

M&L for Construction of septic tank suitable for 150 users, excavation in any type of soil foundation in PCC 1:2:4, type B-2 brick work in cement mortor 1:4 internal plaster 12mm thick in cement mortar 1:3 mixed with water proofing compound, external and bearing plaster shall be 15mm thick in cement mortor 1:4, RCC slab in M-25 design mix concrete including RCC precast manhole cover reinforced with 8mm dia bars with angle iron frame, vent shaft and sludge chamber etc complete all as specified and directed.. Drg No.:-TD brick-217 sheet 1/7 to 7/7.

Construction of brick soakage well size of 3.30 M dia x 3.00 m deep, excavation in any type of soil , Foundation in PCC 1:3:6, type C-2 wells of Honey combed and solid in M-25 (design mix) Concrete, including intercepting chamber, screen chamber Brick work in cement mortar 1:4 plaster where shown of drg shall be 12mm thick cement mortor 1:4 RCC cover slab in M-25 filling with brick bats, of gauge 80 to 150 mm complete all as specified and shown on drgs. Drg No:- TD-309 sheet 1/4 to 4/4.

S & F 100mm cast iron sanitary connection socket to fit wc outlet complete all as specified

S&F 100mm Cast iron SANITARY CONNECTION TO BEND ( 92nd half digree) , with arm 380 to 450mm , excluding joint complete all as specified.

S&F 100mm cast iron sanitary connection 'P' branch , with branch 370 to 450mm long specified and directed.

S&F 100mm cast iron sanitary connection 'S' branch , with branch 370 to 450mm long specified and directed.

S&F 100mm cast iron bossed pipe basin to bath connector , single ( for one pipe system) specified and directed.

S&F 100mm cast iron sanitary connection short connection pipe of length upto 300 mm complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, CP jet and pipe etc complete including necessary PVC pipe fittings fixed in repairs, complete all as specified.

S&F Brass chromium plated bottel trap 32mm dig for WHB With with inlet outlet , screwed for pipe or connection including necessary packing , union with cap and fixed complete all as specified.

M&L Cast iron floor trap 75mm dia, with grating including jointing to wast pipe fixed in cement concret 1:2:4 type B-1 (1:2:4) complete all as specified.

M&L Cast iron Nahani trap 75mm dia , with grating including jointing to wast pipe fixed in cement concrete 1:2:4 type B-1, complete all as specified.

M&L PVC 75mm SWR dia floor trap, plain with greating including jointing with solvent cement specified and directed.

M&L PVC SWR 75 dia multi floor trap, plain with greating including jointing with solvent cement specified and directed.

S&F cast iron soil , waste and vent pipe 100mm dia in any length or without ears , with cement joints , laid in trenches or in floors complete all as specified.

S&F Cast iron soil , waste and vent pipe 75mm dia in any length or without ears , with cement joints , laid in trenches or in floors complete all as specified.

S&F cast iron soil , waste and vent pipe 100mm dia in any length or without ears , with cement joints , fixed to walls or in floors complete all as specified.

M & L for hardcore of gauge exe. 63 mm but n. exc. 100 mm deposited spread and levelled in layers n. exc. 15cm thick watered and rolled and rammed to a true surface with broken stone or boulders as in hardstanding complete all as specified and directed.

S & F vitreous china wash down water closet pan ( pedestal patern) white with plastic water closet , black , closed pattern with recessed bottom and cover mild steel chrominum plated or aluminised hinging device (excluding fixing bolt flushing cistern and flush pipe complete all as specified.

S & F Urinal bowel type or half stall pattren basin only including connections to flushing pipe and outgoing pipe fix in repairs.

M&L for Vitreous Chaina urinals , bowels type ( back or corner wall type) complete including providing and fixing plugs , beding urinals against wall in cement mortor 1:2, securing urinals to plugs with and including 60mm long brass screws pointing around urinal back in cement , fixing automatic flushing cistren with breackets flushing pipe, greating and Union or flushing pipe .( Exclusive of fixing supply pipe to flushing cistren , trap and waste pipe) complete all as specified and directed.

S & F PVC Low level flushing cistern 10 ltr capcity symphonic action tyupe white including ball valve,float valve and handle including bracket and PVC flush, complete all as specifed and directed.

M&L for Wash hand basins , Vitreous China ( flate bacl or angle back type) any size including cutting for and pinning in ends of breakets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reformsing benching as required for 150 mm dia pipe complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2: 4 type B-1 (using 20 mm graded crushed aggregate) as in flooring including finishing the surface even and smooth with using extra cement, complete all as specified and directed.

S&F in repairs 8mm thick HDF laminated wooden flooring over and including 2mm thick foam sheet over a layer of polythene film sheet over finished top finished floor and including skirting complete all as specified and directed to wooden flooring defective portion by dismantiling and replacing with new one to match with existing wooden floor inclusive all necessary items required for replacement of existing defective wooden flooring, skirting and threshold pleces as required complete all as directed. Make:- HIL Ltd, Archid ply Ind Ltd, Visaka Ind Ltd

M & L for 1st class wood teak wood plain chowkats and frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed, including 40mm thick 1st class teak wood decorative plain framed and arch shape glazed and panelled shutters (2 Nos) (any number of decorative panels) with lock rail 150mm, bottom rail 200mm and panel of 15mm thick 1st class teak wood as per IS 1003 (part-I) kiln seasoned and chemical pressure treated. Alongwith Ist class teak wood plain fillets exc 13 but n.exc 25sqcm square / rectangular or triangular in section clean sawn secured with nails or brads. Now, apply two or more coat melamine polish on wood surfaces over a coat of wooden primer & wooden filler complete all as specified and directed including fancy and decorative type 200 mm long brasss barrel, semi barrel and skeleton tower flush bolts 03 Nos in each panel, total panels 02 Nos and fixed flush complete with,125-150mm butt hinges, cast brass with mild steel hinge pin brith polished and fixed with fancy and decorative type 300mm long brass sliding door bolt and fancy type and decorative 150mm long extruded brass handles (04 Nos) & door stopper fabricated type polished complete all as specified and directed. Qty 01.00 Sqm(Appx). Note : Contractor shall visit the existing internal heritage Chetwode doors before quoting their rates.

M&L for preparation of new or previously untreated surfaces of any discription over 10 cm width or girth and applying two coat of synthetic varnish over a coat of wood filler liquied transparent complete all as specified and directed.

M&L for Prepration of old distamper surface of wall and applying one coat of oil bond distamper complete all as directed.

M & L for 9mm thick plywood garde BWR, type BB fixed with screws to wooden frame of size section 25mm X 25mm as in wall panelling complete all as specified and directed. Make:- HIL Ltd, Archid ply Ind Ltd, Visaka Ind Ltd.

M&L for 4 mm thick veneered decorative plywood garde with BWR resin with decorative face veneers on one face fixed with nails to timber frame work complete all as specified and directed. Make:- Archid ply Ind Ltd, Vidya ply & Board pvt Ltd, Adarsh solar pvt Ltd.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggt) as in mass concrete,foundation and sub base complete all as specified and directed.

M &L for brickwork with burnt clay sewer bricks straight or curved on plan exc 6 m mean radius for man-holes in sewer works in cement mortar (1:4), all as specified and directed.

M& L for Rendering 10 mm thick on fair face of brickwork or concrete surface in cement mortar (1:4) using WPC and finishing the surface even smoothg without using extra cement. (Note: WPC shall be measured & paid separately as supply only).

S & F, factory made Precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) manhole cover slabs, set in cement mortar 1:6, including steel framed, re inforcement, formwork moulds, hooks, paint to steel fram etc complete all as specified and approved by GE.

M & L for PCC 1:2:4 Type B-1 (using 40mm graded crushed stone agg) as in lintels upto 1.50 M clear span cills, steps seismic and other similar bands, plinth coarses, string courses, lacing courses parapet and railing upto 60 CM in height, coping, kneelers, apex stone, bed plates, kerbs, etc. complete all as spd. and directed.

M & L for Reinforced drain concrete cement pipes, 150 mm dia ,class NP-3, laid and jointed complete with collars in cement mortar (1:1) with spum yarn and tested complete all as specified.

M & L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone agg) in foundation bed to drain pipes of 150 mm bore, including packing under and hauching against the sides of pipes after they are laid and tested completed all as specifed and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified.

Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc complete all as specified.

M&L 15 mm thick rendering on brick or concrete surface in cement mortar 1:4 finished even and smooth without using extra complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frame) area n.exc 1.5 Sqm complete all as specified and directed.

Taking down chowkats or frames exc 1.50 Sqm and n.exc 4 Sqm each with shutters (with out taking off shutters from the frames & refixing in same position complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S & F Steel windows box type with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded incl cutting holes in wall for inserting holdfast and making good to the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed.

S & F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50sqm in each pane 4mm thick complete all as specified and directed.

Dismantling Asbestos cement sheets in roof coverings incl ridge all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified.

Dismantling wrought iron or mild steel work of any description all as specified and directed.

S&F of Structural steel, rolled section as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410 W (Gde-E-250)all as specified and directed .

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ciling tiles of Seze 595x595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225 :1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 00.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm , cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of szie 15x32mm of length 600mm to form grid module of size 600 x600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-In-Charge. with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. Make:- Diamond international Inex Pvt Ltd (Brand Diamond ceiling),PR Ceiling product Ltd , Visake induustries Ltd)

M&L for kota stone slab 18-20mm thick in raiser of steps, skirting, dado and pillar laid over 10 mm thick cement screed in cement mortar 1:6 and jointed with pigment to match the shade of of the slab including rubbing and polishing all as specified and directed.

M&L for machine cut kota stone flooring 18-20mm thick including 15 mm thick cement mortar screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

Dismantling Stone slab and tiles of any description and type in floor apron etc all as specified and directed.

Demolition of concrete on ground floor and paving n.exe 15cm thickness(below or above ground level) all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in floors,plinth protection etc finished even and smooth with using extra cement complete all as specified and directed.

Preparation new wooden surfaces any description over 10 cm width or girth and applying two coats of synthetic enemelled paint over one a coat of pink primer complete all as specified and directed.

Preparation new steel surfaces exc. 10 cm width or girth and applying two coats of synthetic enemelled paint over one coat red oxide promer complete all as specified and directed.

M&L for complete removal of existing treatment all as directed Engr-in-Charge

M&L for applying 1.00 to 1.50 mm thick wall putty on walls for smooth finish rubbing the surface till achieve smooth surface all as directed Engr-in-Charge

Preparation of new surfaces and applying two coat of distemper oil emulsion (OBD) over a coat of primer by mechanical mean/Roller complete all as specified and directed.

M & L for preparation of wall pastered or unplastered on new surfacesand applying two coats of cement based paint over a coat of cement primer all as specified and directed.

Preparation old painted wooden surfaces any description over 10 cm width or girth and applying One coat of synthetic enemelled paint complete all as specified and directed.

Preparation old steel surfaces exc. 10 cm width or girth and applying One coat of synthetic enemelled paint including all preparation complete all as specified and directed.

M & L for Mild steel, plain, black 1.60 mm thick, sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc. with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sq mm 2 core all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc. over 15 mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified.

M&L for glazed ceramic coloured tiles 300x 200 x 7mm thick in vertical surfaces including 10 mm thick rendering in cement mortar 1:3 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified.

Description all as per item No. 20 here- in- before, but 5 to 10mm dia as in stirupps complete all as specified and directed.

M&L for formwork to sides of concrete foundation , footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping).

M&L for Formwork to sides and soffits of floor or roof beams, beam, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M&L for Form work to edges of concrete slabs n exc 20 cm thick.

M&L for form work to sides of concrete pillar, column posts, strutts complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete M-25 (20 mm crushed stone graded aggregate) as Beams, cantilivers, bressummers lintles over 1.5 m span etc complete all as specified.

M&L for rienforced cement concrete M-25 (20 mm graded aggregate) as slabs supported on walls beams and columns in floors, roofs landings, balconies canopies deck slabs and in shelves and like etc complete all as specified.

M&L for rienforced cement concrete M-25 (20 mm graded crushed aggregate) as foundation including rafts, footings, foundation beams plinth beams bases for column etc complete all as specified.

M&L for rienforced cement concrete M-25 (20 mm graded aggregate) as Column, pillars, piers posts and structs etc complete all as specified.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius in half brick thick wall built in cement mortar 1:4 complete all as specified.

M&L for 5mm thick rendering on fair faces of concrete surfaces of ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick masonry or concrete surfaces of wall in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed.

M&L for Vitreous, china squatting pan 'orissa' pattern size 580x440mm white, with integral foot rest ( (excluding flushing cistern and flushing pipe) complete all as specified & directed.

S&F vitreous china wash hand basin, white size 550 x 400 mm incl bracket, PVC waste pipe & CP waste coupling all as specified

S&F PVC connection 15 mm size with PTMT nut of length 450 mm.

S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including flush pipe of CP brass suitable for IWC/EWC, 10 Lit capacity complete all as specified.

S&F Grating doom 125mm dia. with waste hole of CP (minimum weight 40 gms), complete all as specified and directed.

S&F Stop/ angle valves 15mm dia bore of pipe, chromium plated, fancy type, with long shank and cap complete all as specified & directed.

S&F Bib taps 15mm dia bore of pipe, chromium plated, fancy type, with long shank and cap complete all as specified & directed.

S&F PVC (SWR) floor/gully trap 100/110 mm, setting and jointing with solvent cement complete all as specified.

S&F PVC (SWR) pipes,75 mm ,single socketed in any length with rubber ring joints fixed in walls complete all as specified and directed.

M&L 100 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches for sewage lines complete all as specified.

S&F 15 mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

M&L for prepration of new or previously untreated concrete/plastered surfaces of any description over 10 cm width or girth and applying three coats of white wash complete all as specified.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone agg) as in plinth protection finished even and smooth w/o using extra cement complete all as specified.

S&F 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.

S&F 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either zixs as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube supplying and fixing in opening as per specification and drawing in SSR complete all as directed.

S&F stainless steel butt hinges 100mm.

S&F stainless steel barrel tower bolt 200 mm long stove enamelled black with bright bolt and fixed complete all as specified

S&F stainless steel 150 mm long mild steel bow handle complete all as specified and directed

S&F PVC (SWR) junction single (single T) equal or unequal of 110 mm bore complete all as specified.

S&F PVC waste pipe 32 mm dia with coupling suitable for urinal and wash hand basin down pipes of required length complete all as specified.

S&F PVC (SWR) bend any radius of 110 mm bore complete all as specified.

S&F PVC (SWR) bend any radius of 75 mm bore complete all as specified.

M&L for providing precast cement concreete louvers and jallies 35 mm thick 1:2:4 type B-0 ( using 12.5 mm graded crushed aggregate) set in cement mortar 1:4 complete all as specified

S & F 500 Litres capacity rotational moulded polyethylene water strorage tanks , three layered, ISI Marked (cylindrical vertical with closed top) hoiseted and fixed in postiton, all as specified in SSR Part I 2009 including 20 mm dia GI light grade washout pipe 50 mm long with plug and 20 mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S&F 15 mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified.(Make: Kirlosker/ Leader/ Zoloto)

S&F 20 mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified.(Make: Kirlosker/ Leader/ Zoloto)

S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

M&L 15 mm thick screed bed in cement mortar (1:3) over concrete surface finished even & smooth with out extra cement with water proofing compound @ 3 % by weight of cement or as per manufacturer instructions while the concrete is green ( WPC shall be measured and paid separately) .

Surface excavation in soft/loos soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified.

M&L for Vitrified exterior colour tile (parking tiles) of size 30 cm x 30 Cm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including screed bed or bedding layer or mortar 15 mm thick in cement mortar 1:6, complete all as specified and directed.

Material and labour for point wiring with PVC insulated and unsheathed electric able 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. Make of wire: Havells, Polycab,Gloster. Make of conduit: AKG, Polycab,Finolex Note: (i) The quoted rates shall be deemed to be inclusive for cutting chasing in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs Where not feasible to draw cable in concealed . (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switch

One fan/exhaust fan point controlled by one, one way 6 Amp switch

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad all as specified and directed.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board all as specified and directed.

S & F switch piano, flush type, single pole one way, 5/6 Amp complete all as directed. Make: Anchor (Penta PC), Havells (Reo),Legrand

S&F ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: Anchor (Penta PC), Havells (Reo),Legrand

S & F MCB DB,s double door SPN with 200 Amps rated copper bus bar with neutral bar,earth bar,cable ties for cable management, fully shrouded neutral bars ,reversible door, 240 volts with blanking plates where required and IP 43 DB,s degree protection of 4 way SPN DB capacity complete all as directed. Make :legrand in L&T, ABB, Schneider,

S & F in repairs MCB 240 volts 'B' Curve 10 KA, including connection with suitable size copper lugs for following Rating /capacity complete all as directed. Make: Legrand, equvilent in L&T, ABB, Schneider

MCB SP6 to 32 Amp.240 volts

MCB SPN 40 to 63 Amps 240 volts

Supply and Fixing LED Batten light fittings on walls including brackets all as conforming to the following parameters : - (i) Syatem watt/Lumens: - Max-22 watts/total system lumen not less than 2200 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 5700( COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 20000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheets conforming of technical spscifications. Make: - PHILIPS/Crompton/Havells

Supply and fix exhaust Fan ,steel body ,AC Single phase ,voltage 230volts ,50HZ,copper winding of sweep 300mm with louvers, including cutting holes on wall and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface complete all as directed. Make:- Bajaj/Havells/Crompton

Supply and laying in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade 6 Sqmm x 2 Core crosectional area fixed on wall in PVC pipe or burried in ground up to 30cm all as specified and directed.

Taking out old Unsv LT UG cable of any size doing excavation in graound all as specified and directed.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) Note : Punned thickness will be measured all as specified and directed.

Suppy and laying un-reinforced precast cement cable cover ,cass LV,type -I flat size 250x150x40mm all as specified and directed. Make:- Tulip/NTC/Mahtab Tiles

Supply and laying tube light grad galvanised of size 50mm dig with all fitting ,Laid in ground for crossing the cables across the road by cutting existing road and making good the road surface after laying of pipe complete all as directed.

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.(Two earthing for each main Panel ) all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. all as specified and directed.

Taking down old U/S main switches, Sheatmetal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed.

Taking down old unsv T/L, Lamp,Security light of any size and capacity all as directed.

Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work. all as specified and directed all as specified and directed.

All as per item No. 141 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed.

Supply and fix Switch piano, flush type, single pole, one way, 15 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.

Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.

Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 &15 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.

Supply and fix Electronic step rotary type fan regulator 100W, 230 volts AC 50Hz complete all as specified and directed. Make:- Anchor/Legrand/Havells/C&S.

Supply and Fixing LED street/Security light fittings on poles/Wall with mounting brackets including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as conforming to the following parameters : - (i) Syatem watt/Lumens: - Max-25 watts/total system lumen not less than 3000 lm (ii) Housing: - Single Piece High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - Suitable for pole mounting with bracket arm 40-50mm dia, Mounting height- 5.50m to 6.50 m from GL. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 5700 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence.Also submit BIS of Luminair and drivers Make: - PHILIPS Cat No BRP046 LED30 CW MR S1 PSU GR/HAVELLS/WIPRO/CROMPTON

S & F MCB DB SPN,16 ways( For Light and power ) complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. All the above mentioned specs the technical documents from OEM shall be provided at the time of bidding of following capaity .

Supply and Fixing LED 2 x 2 Surface Mounted fittings all as conforming to the following parameters : - (i) Syatem watt/Lumens: - Max 35 watts/total system lumen not less than 3200lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - surface mounted (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 90 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - NA (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence.Also submit BIS of Luminair and drivers. Make: - PHILIPS Cat No SM365LED32-6500 PSU OD WH /WIPRO/CROMPTON/Havells

Supply and fix ceiling Fan complete with blades,down rods,Fan Hook and acessories ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Bushless direct current motor (BLDC) 5 star rating complete all as specified. Make:- Crompton/Philips/Havells/Bajaj.

All as per description of serial item No 68 her-in-before but in gauged shutters without sash bars all as specified and directed.

M & L for preparation of old surfaces and applying one coat of cement base paint complete all as specified and directed.

Sharda Enterprises

M/S PUNDIR BUILDERS

M/s RK ENTERPRISES