SPECIAL REPAIR TO BUILDING NO H AND K (P-171 AND P-173) AT SMA NAVAL BASE KOCHI

Amount

Taking down door chowkats (wooden/steel/PVC) with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters with frame n exc 1.5 Sqm (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description n exc 1Sqm complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but nex 2 sqm complete all as specified and directed.

S&F 2nd class hard wood solid striaght chowkhats & door frames, rebated on the solid, rounded or chamferred put together with glue pinned at joints complete all as specified and as directed.

S&F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board the size of rails and stile as per IS -1003 klin seasoned and chemically pressure traeted complete all as specified and as directed.

S&F Second class HW 35 thick Glazed skelton shutters open rebated and prepared to recive gauze etc9 withoutsash bars) edges of framing ,plain chamfered or rounded fitted with cut and mitread beads for securing glass ectc size of members of shutters complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs Stainles steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with s/s wire staples complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in openings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed..

M&L19 mm thick pre laminated particle board exterior grade one side with decorative choice lamination &other side balancing white lamination fixed with nails and screws complete all as specified and directed.

Extra over rate of block board or veneered particle board external teak wood lipping 6mm thick fixed with headless nails complete all as specified and directed.

M&l second class HW plain fillets square or rectangular in section area exeeding 13 sqcm exeeding 25 square cm fixed with screws clean sown complete all as specified and directed.

S&F mild steel work in hold fasts etc and similar small articles confirming to Fe-290 Gde E 165 fixed in plain cement concrete 1:2:4 type B1 using (20mm graded crushed stone aggregate) including treating with tar or coal tar black paint complete all as specified and as directed

S&F Stainless steel hinges 100mm , heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F S/S Continuous ( Piano) hinges width of flap 30 mm when open complete all as specified and directed.

M&L for 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.

M&L for 100mm size SS handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.

M&L for 150mm size aluminium tower bolt (ISI Marked) anodized, fixed complete all as specified and directed.

M&L for 75mm size aluminium tower bolt (ISI Marked) anodized, fixed complete all as specified and directed.

S&F Floor door stopper of Aluminium alloy body and tongue , anodised with hard drawn steel spring, fixed in steel (overall length of cover plate 140mm) complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 75mm hasp and staple Aluminium anodised (ISI Marked) fixed with screws complete all as specified and directed.

S&F powder coated anodised aluminium frame windows, ventilator with one or more rebates including joining cleat for fixing etc. complete (Sliding type/Side hung type) complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S & F sheet glasses,plain 4.00mm thick glazing with glazing clip & rubber gaskets etc exc 0.5 sqm in each pane complete all as specified and directed.

S & F sheet glasses pin head type, 4.0mm thick glazing with aluminum beading, glazing pin etc n exc 0.5 sqm in each pane complete all as specified and directed.

S& F Aluminium deco grill (DG 104) fixed with windows with all fittings as directed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the permises complete all as specified and directed.

M& L for Glazed coloured ceramic tiles in vertical surface 450x350x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair face of brick work or concree surface in CM 1:4 s finished to receive tiles complete all as specified and directed.

M&L vitrified tileof size 400x400 8mm thick over cement screed 10 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L vitrified tiles of size 600X600 X8-9mm thickness with approved Pattern over cement sreed 10 mm thick in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No. 35 above but as in skirting over cement backing coat 10mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of cement concrete unreinforced in any Position not otherwise specifically provided complete all as specified and directed.

M&L 75mm thick PCC Type CI 1:3:6 (20mm graded agg) as in plith protectio finished even and smooth without using extra cement complete all as specified and directed.

M&L prepolished with grooves kota stone slab (in single piece) flooring 20-25mm thick bullnosed over cement screed 15mm thick CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed.

M&L prepolished with grooves Kota stone slab 20-25mm thick ( in single piece) in riser of steps, skirting, dado and pillar laid over backing coat 10mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed.

M&l 20 mm thick makrana white Marble tile laid over cement screed CM 1:6 15 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete allas spcified as boarder to kota stone flooring complete all as specified and directed.

Demolition of stone slabs of any description or thickness laid bedded in any motar complete all as specified and directed.

M & L for 20mm thick granite stone slab( Jet black )over cement screed 15mm thick in CM 1:6 over 25mm thick PCC type Bo 1:2:4 (using 12.5 mm graded stone aggregate ) as levelling course over RCC Slab complete all as specified and directed .

Dismantling wrought iron or mild steel work of any descrip[tion not otherwise provided complete all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165. complete all as specified and directed.

Demolition of brick/PCC Block masonary work built in cement mortar complete all as specified and directed.

M&Lprecast cement cocrete block masonary (Type C1 1:3:6 )with solid blocks exce 10 cm width and setting in motar 1 :6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L cement Plaser in two coats 8mm thick in CM 1:4 using WPC over 12mm thick in CM (1:6) on external surfaces is to be finished even smooth with out using extra cement with using Approved WPC complete all as specified and as directed.(Note : WPC shall be meassured separate item)

M&L for rendering 10 mm thick internal cement plaster in CM 1:6 on fair faces of brickwork or concrete surfaces is to be finished even smooth with out using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick cement plaster in CM 1:3 on fair faces of brickwork or concrete ceiling surfaces on ceiling is to be finished even complete all as specified and as directed.

Supply only Integral waterproofing compound (ISI marked) complete all as specified and directed.

M & L for preparation & complete removal of existing treatment on internal surfaces of walls, and applying 2 mm thick wall care putty on old plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion all as specified and directed complete all as specified and directed.

M & L for preparation new plaster surface of wall and applying 2 mm thick wall care putty on new wall surfaces, preparatory to distempering & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of new ceiling surface and applying three coats of white wash on ceiling complete all as specified and directed.

M & L for complete removal of existing treatment & preparation of old surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

M&L preparation of new plastered surface of wall and applying three coats of whitewash complete all as specified and directed.

M&L for complete removal of existing treatment and application of one coat of primer and allowed to dry overnight before applying first coat of weather coat acrylic emulsion complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of weather coat acrylic emulsion paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of weather coat acrylic exterior emulsion paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed.

M&L for preparation of new plastered surface and application of one coat of primer and allowed to dry overnight before applying first coat of weather coat acrylic emulsion complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of weather coat acrylic emulsion paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of weather coat acrylic exterior emulsion paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed. Make of weather coat acrylic emulsion paint: Ultima Protek of asian paint/equivalent of Berger/Nerolac or equivalent manufactures listed in list of manufactures

M&L Preparation of old painted wooden surface of any description over 10cm in girth/width and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of new wooden surface of any description over 10cm in girth/width and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of anti corrosive synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Taking down tar felt (water proofing treatement) on roof slab incl cleaning and removing tar felt material and disposing to a distance of exc 250m not exc 500 m complete all as specified

M/L screed bed or bedding layer of mortar 15mm in CM 1:4 (using WPC) for laying floor finishes etc complete all as specified and directed. .

M&L for applying oil based bitumenous primer @ 0.20Kg/Sqm provided and laying 4mm thick APP modified water proofing membrane weighing not less than 4Kg/Sqm reinforced with non woven polyster matt weighing not less than 160gm/Sqm having softening point not less than 650N/Sqm, tearing strength of 180N/Sqm Torque application including minimum 10cm side overlap and 15cm end laps applying a coat of blown grade hot bitumen 85/25 over the membrane 1.20Kg/Sqm finishing with solar reflective bitumenous based aluminium paint @ 0.10Kg/Sqm complete all as specified and as directed by Engr-in-Charge.

Antitermite post costruction treatment along the external wall below concrete or masonry using chemical emulsion @2.25/linear meter including pluging holes etc complete all as specified and directed.

Antitermite post costruction treatment under existing floors using emulsion one litre /hole300mm apart including drilling along external wall below including pluging holes 12 mm dia holes with CM1:2 to match with the existing one complete all as specified and directed.

Antitermite post costruction treatment of voids in masonary using chemical emulsion one litre/ hole at 300mm interval incuding drilling hole at 45 degree and replugging them with motar 1:2 to match existing floor complete all as specified and directed.

Antitermite post costruction treatment at all points of contact of wood work by chemical emulsion @0.5litre/ hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same, oil or kerosene based solution complete all as specified and directed.

S&F in repairs 15mm bore dia fancy type pillar taps cast copper alloy with capstan heads,chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts,screwed for iron pipes

S&F stop valves cast copper alloy with crutch or butterfly handle , screwed down , screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F Vitreous china wash basin white ( flat back or angle back type ) but including brackets , including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed in repairs complete all as specified and directed.

S&F PVC Connection 15mm bore 45cm long with brass coupling complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet Squating pan Orissa pattern size 580x440mm white with integral foot rests ( Excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F Soap dish SS appx size 160 x 160x90mm recessed type fixed to plugs with CP brass screws fixed in repairs complete all as specified and directed.

S&F CP brass towel rail 60 cm long fixed complete all as specified fixed in repairs complete all as specified and directed.

S&F in repair Sink with drain board made of S/S 1 mm thick kitchen or laboratary with plugs washers,including bedding in cement mortar on to dwarf wall or including cantilever brackets and connecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx160mm including waste coupling brass 32mm dia complete all as specified and directed.

S/F PVC valve less,low level flushing cistern ,10 ltr capacity,white symphonic action with inlet, ball valve, float and handle including flush pipe and brackets complete all as specified and directed.

Demolition of 100mm AC or reinforeced concrete drain pipes, jointed in cement mortar and taking out of wall complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber ring joints fixed on wall complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber ring joint fixed on wall complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm dia vent cowl complete all as specified and directed.

S& F PVC (SWR) 75mm dia vent cowl complete all as specified and directed.

S&F PVC Nahani Trap 75mm (SWR) floor trap, plain with grating including jointing with solvent or cement complete all as specified and directed.

S & F 110mm dia PVC (SWR) T single junction with access door complete all as specified and directed.

S & F 75 mm dia PVC (SWR) T single junction with access door complete all as specified and directed.

S & F 75mm dia ( SWR) branch piece single ( single' Y') equal or un equal complete all as specified and directed.

S&F Grating round 140mm size of PTMT (Min Wt-50 gms) complete all as specified and directed.

S&F 900mm x800mm x 20mm S/S Plate rack fixed in repairs complete all as specified and directed.

S&F Low density polythylene pipes (LDPE) 32mm of pressure rating 6kg/cm2 laid in trenches complete all as specified and directed.

S&F Waste coupling of PTMT with discharge pipe bore dia of 32mm( half or full threaded) Minimum wt 32mm-45 gms complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:3 or concrete surface or brick surface to sunken floor with 3% WPC(Note : WPC shall be meassured separate item) complete all as specified and directed.

M&L for 2 coat bitumen grade 85/25 applied hot to concrete surface at rate of 1.5 kg per sqm per coat complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3 Kg/ Sqm & minimum 3 mm thickness reinforced with polyster non woven fabric (wt not less than 150 gms/ sqm) land on primed surface by forced application complete all as specified.(Make: BASF/Fosroc/IWL/ STP Ltd or equivalent makes in list of manufactures)

M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 50mm thick in sunken floor of toilet/bathroom finished even and smooth with out extra cement complete all as specified and directed.

M&L for PCC type E2 1:5:10(40mm aggregate) in sunken floor of toilet/bathroom finished fair and even complete all as specified and directed.

M&L provide 50 mm dia UPVC pipe of pressure rate 10kgf/cm2 as water spout in sunken floor complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M&L point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sqmm PVC insulated unsheathed FRLSH grade confirming to IS-694 multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic medium grade of suitable size with all conduit accessories on wall except beam, column and RCC roof and chases cutting incl 2 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated sheet top cover for accomading switches socket regulators etc. incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for as the following (a)one light point controlled one, one way switch 5 Amp complete all as specified and as directed.

All as per item No. 106 above but for One ceiling fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

All as per item No. 106 above but for but for one bell/ buzzer point controlled by one push button complete all as specified and as directed.

All as per item No. 106 above but for one light point controlled by two way switches complete all as specified and as directed.

All as per item No. 106 above but for one 5 pin 5 amps socket outlet an independent board complete all as specified and as directed.

All as per item No. 106 above but for one 5 pin 5 amps socket outlet on same board complete all as specified and as directed.

All as per item No. 106 above but for with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board complete all as specified and as directed.

All as per item No. 106 above but for with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure complete all as specified and directed.

S&F switch piano flush type 5A one way complete all as specified and as directed.

S&F Bell push, flush type, 5 amp one way complete all as specified and as directed.

S&F switch piano flush type 6A two way complete all as specified and as directed. Cat Part No. ACMSXXW102 of crabtree

S&F S/S combination 5 pin 5 Amps flush type complete all as specified and as directed.

S&F S/S combination 6 pin 15 Amps flush type multi purpose complete all as specified and as directed.

S&F fan regulator electronic socket step type complete all as specified and as directed.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals complete all as specified and as directed.

Supply & fix ceiling fans complete with accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified incl taking down old fan Make CG Cat Part Energion HS BLDC/Havells cat part No. Efficiencia/polycab cat part no.power saver BLDC or equivalent make mentioned in list of manufactures. Note :-Old ceilingt fans will be deposited in MES store yard

Supply & fix exhaust fans mettalic body 900 RPM AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified Make Havells turbo force sp /CG cat part No. Trans air 12/polycab cat part No.Superb HS or equivalent make mentioned in list of manufactures. Note:- Old exhaust fans will be deposited in MES store yard

S&F Buzzer, Ding Dong AC. 230 volts, single pole all as specified and as directed.

S&F in repair LED bulk head, 10W, 240 Volt all as specified and directed. Cat Part No. HEXAFT10WLED857SSYMBOPC of Havells/Wipro cat part No. LW07-141-XXX-57-XX/CG cat part No. LBH-10-CDL or equivalent make mentioned in list of manufactures,complete all as specified and directed.

S&F in repair 10 W LED mirror light fitting with tube and provided with high output diffuser including all electrical connection all as specified and directed . Make: Cat part No. BN 021 LED10S 6500 PSU GR S1 of Philips/CG cat part No.CCS-102-10-65-SL-DP-NWH/Havells Cat part No.LUMILINEPLUSBS10WLED865SP or equivalent make mentioned in list of manufactures.

S&F LED Tubelight fitting 25/40w ,4 ft with extruded aluminium batten for continuos operation connected accessories complete all as specified and directed. Make:Philips Cat Part No BN 021 LED25S 6500 PSU GR S1/CG cat part No. CCS-100-40-65-SL-DP-NWH/Havells DURAB540WLED865SPCSS or equivalent make mentioned in list of manufactures.

S&F in repair Decorative wall light of 12W fixture made up of polycarbonate suitable for B-22 base, unbreakable fixed on wall including all connection all as specified and directed by engineer in charge Make Havells Cat part no. LHFOFUE1TZ1W012

S&F in repair lamp holder, PVC/poly carbonate type with cord grip for batten fitting complete all as specified and as directed.

S&F LED bulb 9 Watt, B-22 (cool day light) make luker Cat Part No. LBPC09CL or Crompton/Philips

Supply and Fixing building security light fitting LED 40W new generation energy saving and environmental friendly long life LED street light made up of pressure dia cast aluminium housing with high power LED as lighting source and lens emended pc cover having top opening separate driver comartment with IP 66 protection and impact resistance of IK07 including GI bracket for wall mounting all as specified and directed. Make Havells Cat No. ENDURAPEARLNEOSL40WLED757PASYTOPC or Pilips cat part No. BRP409LED040CWHOMRFGS1PSUCR/CG cat part No. LSTS-40-CDL-M or equivalent make mentioned in list of manufactures.

S&F sheet metal enclosures with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB all as specified and directed by Engineer-in-Charge.

S&F in repair sheet metal enclosure SPN DB when MCBs to be used 8 way with 200 amps bus bar double door complete all as specified and as directed.Make: L&T cat part No.DBSPN008DD/Havells cat part No. DHDPSHODRW08/Legrand Cat part No. 507611 or equivalent make mentioned in list of manufactures.

S&FMCB SPN 40 to 63 Amp ,240 Volts,10 KA all as specified and directed Cat part No -BB20060B to BB20320B of L&T or Legrand cat part No. 408617 to 408620/Havells cat part No. DHMZCSNF040-063 or equivalent make mentioned in list of manufactures.

S&FMCB Sp 6 to 32 Amp ,240 Volts,10 KA all as specified and directed Cat part No -BB10060B TO BB10320B of L&T or Legrand cat part No. 408587 to 408595/Havells cat part No. DHMZCSPF006-32 or equivalent make mentioned in list of manufactures.

M&L for taking down old submain wiring from existing position including all connection all as specified and as directed.

M&L for sub main wiring using proper colour coding 1100 Volts grade with 2 runs of 6 Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 1 run of 6 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface . Note - 2 runs of 6 Sqmm sub main wire and on 1 run of 6 sq mm submain wire for earthing and PVC conduit pipe with accesories shall be measured as one unit.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to GI wire 4mm dia as earth up to 7.5 m distance and connected by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 3 ( of SSR Part-I connected to earthing test point all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10 CM c/c, 20 mm bore medium grade watering pipe, water funnel, 40 mm bore GI medium grade protection pipe, common salt, charcoal, dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion complete all as specified. Note : The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. Earth lead beyond 7.50 Mtr length shall be measured and paid separately.

Supply and install, tetsing & commissioning, sealing, single phase electric energy meter, class - 1.0, 5-30 Amps and submit the test results alongwith initial Meter Reading and taking out old unserviceable Energy meter deposit with MES store yard all as specified and directed.Make: L&T cat part No. WH101BC5DDH or equivalent make mentioned in list of manufactures.

Taking down old u/s earthing complete all as specified and as directed.

Supply and fix ion wall /concelealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings solvents of size 25 mm dia, including taking down old one complete all as specified and as directed. Make : Supreme/ Eurotech/ Astral/ SFMC or equivalent amke mentioned in list of manufactures

Supply and fix ion wall /concelealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings solvents of size 20 mm dia, including taking down old one complete all as specified and as directed. Make : Supreme/ Eurotech/ Astral/ SFMC or equivalent amke mentioned in list of manufactures

Supply and fix in repair on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC or equivalent amke mentioned in list of manufactures

S& F CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC or equivalent amke mentioned in list of manufactures

S&F CPVC ball valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all as specified and directed. Make : Supreme/ Eurotech/ Astral/ SFMC or equivalent amke mentioned in list of manufactures

S&F 15mm angle valve, quarter turn with flange, chromium plated for fixing with CPVC pipe and taking down old one complete specified and as directed by Engr-in-Charge. Make Cera Model No. F2004201 or equivalent manufacturers mentioned in list of manufactures

S&F of bib tap CP, quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/CPVC pipe of size 15 mm and taking down old, complete all as specified and as directed by Engr-in-charge. Make Cera Model No. F2004151 or equivalent manufacturers mentioned in list of manufactures

Supply and fixing of swivel overhead shower (Minimum weight 40 grams ) of PTMT any colour with shower arm (minimum weight 40grams) 15 mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one complete and all as specified and as directed by the Engineer -in-Charge. Cat Part No. F7020101 of Cera or equivalent manufacturers mentioned in list of manufactures

S&F concealed stop cock regular body, quarter turn with flange chromium plated with CP cup fancy type of size 20 mm and taking down old one, complete all as specified and as directed by the Engr-in-charge. Make Cera Model No. F2002362 or equivalent manufacturers mentioned in list of manufactures

S&F of kitchen sink cock quarter turn wall mounted with swivel spout not less than 150 mm and wall flange complete including taking down old one complete all as specified and as directed. Make Cera Model No. F2004251 or equivalent manufacturers mentioned in list of manufactures

S&F health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe, including taking out one all as per specified and directed. Make Cera Model No. F8030103 or equivalent manufacturers mentioned in list of manufactures

Supply and fixing in pillar taps, swan neck spout with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and directed by the Engineer-in-charge.(Make : Model No:F2004105 of Cera or or equivalent manufacturers mentioned in list of manufactures).

S&F wall mixer (3-in-1) with arrangement for both Cold water, hot water and for over head shower, with bend pipe complete all as specified. Make Cera Model No. F2004404 or equivalent amke mentioned in list of manufactures

Taking down old stop valve, stop cock, bib cock, swivel shower ,sink Cock,angle valve,Piller tap,Wall mixture,PVC connection pipe & Health faucet from existing position including all fittings all as specified and as directed.

Taking down old CPVC ball valve of size 25 mm/40mm complete all as specified and directed.

Taking down GI tubing/PPR from walls, floors, shafts size 40 mm dia complete all as specified and as directed.

Taking down GI tubing/PPR from walls, floors, shafts size 25 mm dia complete all as specified and as directed.

Taking down GI tubing/PPR from walls, floors, shafts size 20 mm dia complete all as specified and as directed.

S/F float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed.

Taking down old float valve synthetic(PVC) of size 25 mm complete all as specified and directed.

Taking down old rotational moulded polythene water storage tanks of capacity 1000 litres/500 litres complete all as specified and as directed.

S&F in replacement of Rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 litres incl taking out u/s old one Make : Sintex (ISI)/ Aquatech or equivalent amke mentioned in list of manufactures

M&L for fixing aluminium strip 25x3.15mm with porcelain insulators,saddles and fixing screws etc for roof conductor and aluminium conductor above ground all as specified and directed .

M&L for air termination single pointed aluminium rod 12mm dia and 30mm long all as specifed and directed

M&L for test point terminal block made of gunmetal of size 75x75x25mm drilled and screened including 3Nos 8mm dia 25mm long hexagonal headed screws all as specified.

M&L for fixing 32x6mm galvanised iron strip with saddles and screws etc complete all as specified and directed burried in ground

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iorn strip 32 x 6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 5 ( of SSR Part-i connected to earthing test pit all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI medium grade protection pipe , common salt, charcol dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion complete all as specified.

Taking down u/s lightining arrestors aluminium strip including porelian insulators saddles etc complete all as specified and directed.

Taking down old air termination complete all as specified and directed.

Taking old test point complete all as specified and directed.

Taking down Old GI Strip complete all as specified and directed.

S&F PVC Connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and as directed.