RUDA 2026-27

Name of the work:- Construction of CC Road& Drain from Midde Kumar H to Relangi Venkatrao H in Kothapeta of Dowlaiswaram (V) , Est.Rs. 10.00 Lakhs, RUDA 2026-27 Funds Construction of Granular sub-base/base/surface course with local materials ( Selected Earth) spreading in uniform layers with motor grader on prepared surface compacting with three wheeled 80-100KN Static Roller to achieve the desired density complete as per Technical Specification Clause 402 MORD. (2 Layers)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD/ MORTH,

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS : 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion and construction joints, applying debonding strips, primer, sealant, dowel bars, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD (Without Dowel Bars)

Selected earth filliing for Shoulders as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Engaging Dozer (D50) for removal of Silt Removal, Jungle clearance, Encroachments & approaches etc., (HIR-00072)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH,for Drain foundation ,culvert

Sand filliing for levelling as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH for Levelling coarse ,culvert

Providing concrete for Vibrated cement concrete (1:4:8) using grade using 40 mm size Graded hard stone aggregate including cost and conveyance of all materias inclusive of seignorage charges, machine mixing, placed in foundation and compacted by vibration including curing for 14 days complete for Side drain Bed Portion as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.for Drain bed concrete,culvert

Plain Vibrated Cement Concrete (1:3:6) using 20 mm to 12 mm size Graded hard stone aggregate mechanically mixed including cost and conveyance of all materials inclusve of seignorage charges,centering ,laying, vibrating and curing and machine mixing charges for Side Walls of Side Drains etc., complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH for Drain side wals ,culvert walls

Plasteirng in CM (1:5) 12mm thick with dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc to stie including seignorage charges other taxes on materials all operational, incidental and labour cahrges such as mixing, laying, curing, lift charges etc and including cutting Grooves wherever necessary as directed by Engineer-in-charge complete for uneven surface of wall for finished item of work for Drain A/R, Culvert A/R

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MORD / 1600 MORTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including overhead charges & Contractors profit and GST

Reinforced cement concrete R.C.C grade M 20 (Nominal Mix) using 20 mm & 10 Graded HBG Metal mechanically mixed and compacted by vibration including curing for 14 days complete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 MORD / Sections 1500, 1600 & 1700 MORTH for Culvert Slab

Providing concrete for Vibrated cement concrete (1:2:4) using grade using 20 mm size Graded hard stone aggregate including cost and conveyance of all materias inclusive of seignorage charges, machine mixing, placed in foundation and compacted by vibration including curing for 14 days complete for Culvert Approaches as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches

Manufacturing and fixing of MS. Man Holes using M.S. Round/Square bars including cost and conveyance , cutting welding and all fabrication charges for fixing etc. complete