REPAIR REPLACEMENT OF JOINERY BUILT IN FURNITURE PLUMBING SANITARY FITTINGS PLASTERING FLOORING AND ALLIED WORKS AT SQUADRONS CADET MESS TRG AREAS ETC UNDER AGE B R I MAINT AT INA EZHIMALA

Amount

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repairs including providing new necessary aluminium / MS rods as extra stiffening members for doors and refixing in same position complete all as specified and as directed.

Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 Sqm each but without taking off shutters from the frames complete all as specified and as directed.

Taking down chowkats or frames not exc. 1.5 Sqm each but without taking off shutters from the frames complete all as specified and as directed.

Taking down shutters of any description and any material complete all as specified and as directed.

S&F powder coated aluminium sections for frame and shutters of doors, windows, ventilators, partitions etc with one or more rebates including necessary neoprene packing etc complete all as specified and as directed. Note:- Minimum thickness of powder coating not less than 50 Micron.

S&F in repairs aluminium composite panel 4mm thick of approved colour and shade fixed to wooden / aluminium frame work as in door/cupboard shutters complete all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC, 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per site and as per specification & drawing.

M&L for solid PVC door fame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube etc complete all as specified and as directed.

S&F 150mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repairs 150mm anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.

S&F in repairs150mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.

S&F 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F in repairs 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F 150mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F in repair aluminium powder coated Ebco handles, suitable for locking windows / ventilators complete all as specified and as directed.

S&F 300mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

S&F in repair 300mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

S&F mortice lock 100 mm to 150mm long matching with the existing doors and locks complete all as specified and as directed.

S&F in repair mortice lock 100 mm to 150 mm long suitable for existing aluminium doors matching with the existing complete all as specified and as directed.

S&F in repair aluminum anodized tubular towel rail 20mm dia including brackets complete all as specified and as directed.

S&F in repair floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised fixed to door complete all as specified and as directed.

S&F in repair aluminum (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified and as directed.

S&F in repair aluminium expanded metal mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete all as specified and as directed.

S&F in repair SS 304 friction stay of 300 mm long suitable for window/ventilator shutters complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets complete all as specified and as directed.

M&L 4mm thick non-asbestos fiber cement building boards with decorative finish on one face fixed or laid/inserted to timber, GI/aluminium framework with screws complete all as specified and as directed.

S&F in repair anodised aluminium snap grid frame work for false ceiling. The snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm da mild steel rod, J bolts with necessary bolts, nuts and washers. The snap grid (main/cross tee section) supported at ends shall be 40mm x 25mm x 2mm weighing 0.36 Kg/RM and the main & cross tee shall be jointed at junction/ crossing with angle bracket of size 15mm x 15mm x 1.5mm, weighing 0.12 Kg/RM complete all as specified and as directed.

Taking down of cement plaster of any description or thickness/ chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement mixed with liquid water proofing compound complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound of approved quality complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion all rounder (internal /external) over a coat of primer complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.(work shall be carried out in patches)

M&L for glazed ceramic coloured tiles 300X200X6 to 7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed. (work shall be carried out in patches)

M&L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors in patches, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed. (work shall be carried out in patches)

M&L for vitrified ceramic light shade tiles 10mm thick ( square / rectangular ), polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles exc 0.18 sqm and not exc. exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and poointed in white or coloured cment to match of light shade including 15 mm thick backing coat plaster in CM (1:4) complete all as specified and directed. (work shall be carried out in patches)

M&L for chequered cement concrete tiles 250x250x25mm / 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring with 20-25mm thick over 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting-dado and pillar laid , jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab over and including 15 mm thick backing coat in CM 1:4 and rubbing and polishing complete all as specified and as directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick backing coat in CM 1:4 and rubbing and polishing complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / aluminum frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

M&L for 4.8 mm thick sheet glass ordinary quality any size in each pane and glazing with aluminium beading complete all as specified and as directed.

M&L for 4.8 mm thick sheet glass in repairs ordinary quality any size in each pane and glazing with aluminium beading complete all as specified and as directed.

S&F in repair vitreous china wash basin, white coloured, flat back 550x400mm including waste coupling CP, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repair vitreous china, wash down water closet (EWC) white coloured with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.

S&F in repair vitreous china urinal, half stall type, white coloured with and including all fixing acessories complete all as specified and as directed.

S&F in repair vitreous china urinal partition, star white, with and including all fixing accessories complete all as specified and as directed.

S&F in repair plastic water closet seat cover white coloured closed pattern with flat bottom and cover and MSCP or aluminised hinging device complete all as specified and as directed.

S&F in repair PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity complete all as specified and as directed.

S&F in repair 15mm bore chromium plated pillar tap taps (fancy type), long body cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair 15mm dia Bib tap standard of PTMT fancy type any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed.

S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed.

S&F in repair 15mm bore chromium plated bib taps (fancy type), long body cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair 15mm bore stop valve (concealed type), chromium plated cast copper alloy (long shank, fancy type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed.

S&F chromium plated towel ring fixed with CP cast copper alloy screw fixed in repairs complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated towel rail, 600mm long complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated toilet paper holder, complete all as specified and as directed.

S&F in repair chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed.

S&F in repair 125mm size cast copper alloy chromium plated shower rose complete all as specified and as directed.

S&F in repair waste coupling brass, chromium plated with long shank, half thread, 32mm dia, for WHB/urinal etc. complete all as specified and as directed.

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified and as directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including taking up or down old un serviceable pipes complete all as specified and as directed.

S&F 50mm PVC pipes of pressure rating 10Kgf/Cm2 fixed complete to walls, ceilings or in floors etc including taking up or down old GI pipes complete all as specified and as directed.

S&F 40mm PVC pipes of pressure rating 10Kgf/Cm2 fixed complete to walls, ceilings or in floors etc including taking up or down old GI pipes complete all as specified and as directed.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length including all necessary bends, elbow, TEE etc for connection of pipes with rubber ring joints fixed to walls / floor complete all as specified and as directed.

S&F rotational moulded PVC water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including taking down old broken/cracked water tank and reconnecting the water pipe line in position complete all as specified and as directed.

All as per item No.69 above but 1500 Ltr capacity complete all as specified and as directed.

All as per item No.69 above but 1000 Ltr capacity complete all as specified and as directed.

All as per item No.69 above but 2000 Ltr capacity complete all as specified and as directed.

S&F in repair of 40 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

All as per item No.73 above but of 25 mm dia complete all as specified and as directed.

S&F in repair 32mm dia PVC flexible waste pipe for urinals/WHB/ sink complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair stainless steel grating of 150mm size fixed with white cement including matching shade pigment, complete all as specified and as directed.

S&F Brass CP wall mixer in repair 15 mm dia bore for mixing hot and cold water screwed down for iron pipe and fixed all as specified and directed by Engineer-in-charge.

M&L for plywood 18 mm thick, grade BWR, type BB, having one side decorative teak veneer fixed with screws to timber frame work,in repairs of drawers and parts of fixed builtin furniture complete all as specified and as directed.

M&L for plywood 12 mm thick, grade BWR, type BB, fixed with screws to timber frame work and repair to drawers complete all as specified and as directed.

M&L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions.

S&F in repair 400 to 500 mm long telescopic channel SS 304 fixed on existing cupboard drawers including taking down of old one complete all as specified and as directed.

Taking out old serviceable glass of any description, from old aluminium wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size, hacking out old putty or removing beads etc, and securing the same in existing frame with all neceesary packing materials glazing clips, ruber neoprene packing etc.. complete all as specified and as directed.

Dismantling single layer of mangalore pattern tiles in roofing and ceiling complete as specified and directed inclusive of provn of steel scaffolding as per standard engineering practice including removing the u/s and broken tiles from site after completion of work.

M&L for roof tiles of mangalore pattern interlocking at side joints, laid dry complete as specified and directed by Engineer-In-Charge inclusive of provn of steel scaffolding as per standard engineering practice.

All as per item No.86 above but except tiles complete all as specified and as directed.

M&L for ceiling tiles of mangalore pattern tile roofing laid dry complete as specified and directed by Engineer-In-Charge inclusive of provn of steel scaffolding as per standard engineering practice including dismantling and removing the same from site after completion of work..

All as per item No.88 above but except tiles complete all as specified and as directed.

M&L for sealent filling to window/door frame, the work shall include the following :- (a) Cleaning existng treatment like cement mortar and sealent filled between window / door frame and the masonry walls to be completely removed and all the loose adhered particles shall cleaned using air blowers and allowed it to dry. (b) The sealent filling shall be flexible with one part low modulus gun grade elastomeric Polyurethane sealent Nitroseal PU 40 of Fosroc of BASF or Sika of pidilite or approved equivalent to the joints size max of 10 mm width X 10 mm depth. The cured sealent shall have the prperties of MAF 25%, UV Resistance, and service temperature range -40 Degree Centigarde to 70 Degree Centigrade, Nitoseal PU 40 confirms to the standatad compliance of ISO11600:2002 Type F 25 LM, ASTMC920-95 Type S,Grade NS,Class 25. The rate quoted shall include all material, surface preparation, tools scaffoldings safety equipments laboures etc complete as per manufacturers specification.

S&F in repair stainless steel soap dish of approved pattern and design complete all as specified and as directed.

M&L for roof tiles mangalore pattern of interlocking at side joints area of each tiles exc 0.02 sqm and n.exc 0.04 Sqm , laid and bedded in CM 1:4 on Chajjas etc.. complete as specified and directed by Engineer-In-Charge inclusive of provn of steel scaffolding as per standard engineering practice including removing the u/s and broken from site after completion of work.

Demolition of brick work or stone masonry built in cement mortar complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in foundations, filling and mass-concrete complete all as specified and as directed.

M&L for reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Excavating in trenches, n.exc. 1.50m wide and n.exc. 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes pier holes, etc. n exc. 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry type C1 1:3:6 (using 20 mm aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. Note:- All dismantled materials shall be removed without any delay and stacked at places where directed without any extra cost to the Govt.

S&F MS poles, tubular sections including all necessary drilling, welding, bolting or riveting, etc., and similiar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for rendering 15mm thick CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for cement concrete machine pressed chequerred tiles of size 300 x 300 x 20mm thick square in shape of approved tint, as in ramp/stair laid over 20mm thick screed bed in CM 1:4 and pigment to match the colour of tiles complete all as specified and as directed.

M&L for 100 mm thick cement concrete type D- 2, (1:4:8) (40mm graded aggregate) as in subbase complete all as specified and as directed.

M&L for 100 mm thick cement concrete type B- 1, (1:2:4) (20mm graded aggregate) as in hard standing finished the surface even and smooth complete all as specified and as directed.

M&L for liquid water proofing compound complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Dismantling of plain or corrugated steel / PVC sheeting of any gauge, thickness, including Nainital or similiar pattern roof coverings complete all as specified and as directed.

M&L for 2 mm thick fibre glass reinforced translucent corrugated sheeting of approved colour with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

GMS Builders

Gates Infra Construction Co