BID DOCUMENTS FOR SUPPLYING & ERECTING LED STREET LIGHTS FROM WARD NO. 1 TO 11 VARIOUS LOCATIONS AT VALSAD NAGARPALIKA, VALSAD (2ND CALL)

NAME OF WORK: - BID DOCUMENTS FOR SUPPLYING & ERECTING LED STREET LIGHTS FROM WARD

NO. 1 TO 11 VARIOUS LOCATIONS AT VALSAD NAGARPALIKA, VALSAD (2ND CALL)

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

SR.NO SCHEDULE AMOUNT

1 Schedule - "B1"

TOTAL AMOUNT RS.

TOTAL AMOUNT RS.

I/We am/are willing to carry out the work @ ________% Above / Below _____________ Percentage

(shoulde writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works

Estimated Amount Estimated Amount

Put to tender Rupees=1745355 Put to tender Rupees=1745355

ADD % Rs. Deduct % Rs.

TOTAL Rs. TOTAL Rs.

IN WORDS. IN WORDS.

Seal Of Contractor

President Engineer Chief Officer

Valsad Municipality Valsad Municipality Valsad Municipality

Valsad Vaslad Valsad

VALSAD MUNICIPALITY, VALSAD

ESTIMATE FOR SUPPLYING, ERECTING & COMMISSIONING OF STREET LIGHT WITH LED

WARD NO. 1 TO 11 VARIOUS LOCATION AT VALSAD (2ND CALL)

SINGLE ARM BRACKET

Sr. Quantity Unit Discription Rate Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected

as directed of following size.

540.00 Mtr. (A) 2 Core 4 sq. mm 130.00 Mtr.

2 5.00 Nos. Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 K.A. at

415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work

on A.C. supply 50 cys. with all internal connections &

complete erected in16 G.M.S. housing on angle frame

3 25.00 Nos. Providing & erecting 230 V MCB Single Pole for

having 10KA breaking capacity & confirms to IS :8828

in existing box having following capacity

4 Providing and erecting XLPE (IS:7098)(I)-88 ISI

marked armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing cable trench / pipe at

road crossing or floor of following size of cables.

1125.00 Mtr. (C) 4 core 6 Sq. mm 125.00 Mtr.

5 900.00 Mtr. Providing & laying approved make Double Walled

Corugated pipe (DWC) of polythylene (Confirming to

IS-14930-II) with necessary connecting accessories of

same materials at required depth for laying of cable.

Below ground / road surface for enclosing cable and

back filling the same to make ground as per original.

(A) 50 mm Dia Mtr.

Sr. Quantity Unit Discription Rate Unit Amount

6 Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

90.00 Nos. (d) 2 to 4 core 10 Sq. mm 38.00 Ea.

7 45.00 Nos. Supplying Steel Tubular Pole (Swaged) confirming to

IS:2713 (Part-2) 1980, manufacturing process of steel

tubular pole should be as per IS specification basic

steel tube should be ISI Marked pole should be

painted by one coat of zinc comet primer and two coat

of alluminium/approved paint to be erected on / in

existing foundation, the length of poles are below.

(C) 9.00 mtr. Long Swaged Steel tubular pole

(i) Pole as per IS code 410-SP-25 with 300 X 300 X

mm base plate. (Approximate weight 78 Kg) For burial

(ii) Add Extra for M.S. Base plate 300 X 300 X 16 mm

for pole, mounting on surface of foundation on

foundation bolt. with required stiffeners.

(iii) Add Extra for PU base primer and PU Paint on

8 45.00 Nos. Providing M-20/1:2:4 cement concrete foundation &

70% PCC from bottom including excavation for the

pole of size 60x60x150 cms. Deep in below ground

level with plinth of 45 cms x 45 cms (or 45 cms dia x

45 cms) high upper ground level with necessary curing

and finishing in approved manner. (For 9 & 10 Mtr.

9 Supplying & erecting Sintex or approved make SMC

press moulded composite FRP loop-in, loop-out box

aprox. 2mm thick complete with bakelite connector

strip 4way & hinged doors having locking

arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable

clamps & earth bolt of following size of box.

45.00 Nos. (b) 250mmx200mmx100mm 510.00 Ea.

Sr. Quantity Unit Discription Rate Unit Amount

10 Providing Street Light pole bracket consisting of

medium class MS pipe of 4.2 cms. Out side dia

complete with suitable sleeve tubing 45 cms. long M

S. pipe (Medium Class). Suitable for 76.5 mm /80mm /

required size of pole top having sufficient fastners for

fixing the brackets and having spread of 1.5.mtr.

length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer

and two coats of Aluminium / PU paint. paint with

following nos of arms.

45.00 Nos. (A) Single Arm Bracket 1.5 Mtr. 677.00 Ea.

11 Supplying and erecting LED street light / Flood

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

105.00 Nos. (A) Street Light (IP-65), Surge -4KV

(g) above 36 to 48 watts- Cat-ll 3312.00 Ea.

12 5.00 Nos. Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also comporised

permanent ON/OFF switching. Programming switches

& housed in fire proof thermoplastic enclosure &

transperent cover erected as required with necessary

connection. Ea.

[6-7-2]Add.1% Labour Cess.

13 Supplying & erecting power contactor ,AC3 duty

for time switch complete erected as per

Nos. (D) 4 poleCat III 63 Amp.

14 5.00 Nos. Supplying & erecting IP 55 grade 150 x 90 x 75 cms

section pillar fabricated from 14 Gauge thick joint less

M.S. Sheet with angle iron legs 95 cms long made

Sr. Quantity Unit Discription Rate Unit Amount

M.S. Sheet with angle iron legs 95 cms long made

from 40 x 40x 6 mm thick. Jointless M.S. Angle with

cable clamps to be buried in ground to have

appropriate erection to work Uniform Until erected with

cement concrete foundation and 45 cms high bricks

work finishing with plaster etc. hinged double door with

4" x 6" vision panel covered with Mesh & V. panel

overlapping with flap for meter reading internally

supported on both side, with internal and outside

looking arrangement with look and keys in duplicate

x 40 x 6 mm M.S. Angle of Two Nos. one is welded

and other with nut and bolt for erecting bakelite sheet.

Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof

should be without joint with water leakage proof &

tested as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from

Guage MS Sheet with angle iron legs 95 cms long made

from 40 X 40 X 6 mm thick MS angle.

15 5085.00 Kgs. Providing, erecting, fabricating the M.S. structure as

per requirement on site incorporating proper size of

M.S. angles, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted

with one coat of red oxide with erection on site as per

direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.