Replacement of ACSR Conductor by Arial Bunch Cable

Amount

Annexure-A (LABOUR CHARGES)

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bott om including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing,tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in LT line.

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Erection of PCC single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual.

Dismantling of existing LT line 1 Phase 2 wire including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel)

Dismantling of existing LT line 2 Phase 3 wire including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel)

Dismantling of existing LT line 3 Phase 4 wire including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel)

Cartage of PCC Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 71- 100 Km)

Headload cartage of PCC Pole from road to site(distance 1-3 Km)

Head load cartage of small material(distance 1-3 Km)

Straightening of Tilted PCC Poles

Installation of LT Distribution Box 3 Phase for LT AB Cable

Cost for Disconnection and reconnection of consumer services

Fixing of L.T.Bare Neutrel PG Clamp 50Sqmm to 50sqmm Line to Line.

Fixing of L.T.Bare Neutrel PG Clamp 50 Sqmm to 25 sqmm Line to Box.

Fixing of heat Shrink End Cap Suitable for AB Cable

Fixing of mid span insulated Jointing sleeves for AB Cable

Laying and Sagging of 3x95+1x50 sqmm AB cable

Laying and Fixing Insulated Cable LT XLPE Alu. Cond. Power cable

Fixing of MS Clamp for PCC Pole with Nuts and Bolts.

Fixing of Ded end Clamp with I Hook.

Fixing of Suspension Clamp with I Hook.

Fixing of Insulated Piercing Connector for Line to Line taping 95 to 95 Sqmm.

Fixing of Insulated Piercing Connector for Line to Box 95 to 25 Sqmm.

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 71-100 Km)

Annexure-B (SUPPLY ITEMS)

Supply of Stay Clamp made of MS Flat for PCC Pole 8.5 Mtr. of size 50x6 Sqmm. Duly red oxide painted with suitable size with fitted Nut & Bolts and washer as per specification of UPCL.

Supply of Suspension Clamps with I Hook. As per drawing and UPCL Specification.

Supply of MS Flat for Box Bottam Side of size 35x5 Sqmm duly red oxide painted with suitable size with fitted Nut and Bolts and washer as per specification of UPCL, per box 2 No. Flat Patti.

Supply of Dead End Clamps with I Hook. As per drawing and UPCL Specification.

Supply of mid span Insulator J. Sleeve for LT AB cable.

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95 Sqmm to 25 Sqmm TYCO/RPG/3M Make.

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95 Sqmm to 95 Sqmm TYCO/RPG/3M Make.

Supply of M.S. Clamp made of M.S. flate for PCC Pole 8.5 Mtr. long, size 50x6sqmm. duly red oxide painted with suitable size with fitted Nut & Bolts and washer for Suspension without cracks & burrs as per specification of UPCL.

Supply of M.S. Clamp made of M.S. flate for PCC Pole 8.5 Mtr. long, size 50x6sqmm. duly red oxide painted with suitable size with fitted Nut & Bolts and washer for Dead End without cracks & burrs as per specification of UPCL.

Supply of PG Clamp 50Sqmm to 25 Sqmm

Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer (Sintex/RMC make or other ISO reputed company) with Panel Lock with key) (As per drawing attached)

Supply of LT Bare N.Conn. PG Clamp for DB 50-50 MM2.

Supply of HS.Type End Caps for LT AB cable 120 mm2.

Supply of LT XLPE Cable 1x25 Sqmm.

Supply of LT XLPE AB cable 3x95+1x50 Sq.mm.

Supply of Aluminium Lugs O Type 25 mm (4x25).

Supply of Lugs O Type 95 to 120 Sq.mm.

Supply of M.S. half Clamp made of M.S. flate for PCC Pole 8.5 Mtr. long size 35x5sq.mm duly red oxide painted with suitable size with fitted nuts & bolts and washer for Fixing of L.T. Distribution Box without cracks & burrs, painted by primers.

SHIV ELECTRICALS

RAVI CONSTRUCTION CO