Labour Room Strengthening as Per LAQSHYA Standard and Setting Up Of Obstetric HDU/ICU THQH Thaliparamba, Kannur-Phase 1

Amount

CIVIL WORKS

15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.12.1 Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

15.13.1 Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above

14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materialsi/c malba all complete as per directions of Engineer-in-Charge

15.52 Dismantling of flushing cistern of all types (C.I. / PVC/ Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead

od314899/2020_2021 Dismantling of Existing wash basin<br>

od314900/2020_2021 Dismantling of Existing Urinals<br>

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

15.57 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer-in-Charge

5.3 Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

50.6.1.5 Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

11.36 Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

9.48.2 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

9.117.1 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm

9.118.1 Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).

21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

13.48.3 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqmover anunder coatof primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

9.105.2 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS : 2095 : part I

12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6 mm thick with flanges of sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

PLUMBING WORKS

17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

17.7.11 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Stainless Steel AISI - 304 (18/8) Wash basin 530 x 345 mm with single 15mm C.P. brass pillar tap

17.28.2.1 Flexible pipe32 mm dia

50.17.1.4 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

18.21.1.1 Providing and fixing uplasticised PVC connection pipe with brass unions:30 cm length15 mm nominal bore

18.65 Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.

18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes

od23776/2021_2022 Providing and fixing ball valve (brass) of approved quality<br>20 mm nominal bore

50.18.8.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

od23777/2021_2022 Supplying, Installing & Testing at site in position SWR pipe of Type B (IS:13592) including injection moulded fittings with bosses where required eg tees, bends, clamps couplings and adapters & clamping with Universal clamps, Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete.and jointing with adhesive approved by manufactures including cutting and making good the walls or surface mounted with clamps as required at site (For Soil & waste pipes ).<br>110 mm

od23778/2021_2022 Supplying, Installing & Testing at site in position SWR pipe of Type B (IS:13592) including injection moulded fittings with bosses where required eg tees, bends, clamps couplings and adapters & clamping with Universal clamps, Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete.and jointing with adhesive approved by manufactures including cutting and making good the walls or surface mounted with clamps as required at site (For Soil & waste pipes ).<br>75 mm

od23779/2021_2022 Supplying & Installing at site in position Floor Drain Lock type (SS304) of 1.2 mm thick.<br>125 x 125mm Square<br>

od23780/2021_2022 Supplying, Installing & Testing at site in position uPVC Deep seal Floor trap (ht 7") supporting on G.I. slotted rails (1.6 mm thick), Full threaded rod , Anchor Fasteners etc at site.<br>110 X 75mm dia out let (Multiple Floor Trap)<br>

ELECTRICAL WORKS

1.10.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A

1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loop earthing as required.

1.41 Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required.

1.50.1 Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep

1.58 Supplying and fixing PVC batten/ angle holder including connection etc. as required.

od319354/2020_2021 Supply of 1200mm, 20W LED Tube fittings prewired complete with<br>all<br>necessary accessories as required

od319355/2020_2021 Supply of 9W LED bulb in the existing angle holder as required. (

od319357/2020_2021 Supply and conveyance of exhaust fans in the existing opening 250 mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C

od321465/2020_2021 Supply and fixing 1.5Ton 5 Star Split AC. It comes in a beautiful White color. The AC has a LCD display on unit.It has Dust Filter. The AC's Power Consumption is1430W. The Split AC comes with a 1 year warranty. It has 5 year compressor warranty.

od319358/2020_2021 Supply and conveyance ceiling fans (5-star rated) using standard accessories excluding regulator,wiring the down rod with 16/0.20 mm PVC<br>insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended<br>original wiring etc as required.<br>1200 mm Sweep Ceiling Fan

1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.48 Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).

1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm

1.17.3 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.18.2 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair

1.53.1 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

1.27.1 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.6 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

MAJOR OPERATION THEATRE

od322848/2020_2021 Complete Plenum System with Hepafilters-Indigenous:Supply , installation, Testing and Commissioning of Air Supply (2400 mm X 2400 mm) ceiling for air distribution system with aluminium complete with 8 Nos. Mini Pleat Flange Type HEPA Filters ( efficiency 99.97% down to 0.3 microns ) complete.For Distribution of supply/ return air flow as follow. a) 30% of return air exhausted through blower near the AHU. b). 30% Fresh air will be mixed in mixing chamber.c). 70% cooling air will be circulating from AHU.

od315104/2020_2021 Manual Hermetically Sealing Sliding Door:Providing, Fixing, Supply, Installation, and Commissioning of Automatic Hermetically Sealing Sliding Door , having high pressure laminate on both sides that could withstand high abrasion , vision panels (300x300mm) , for smooth sliding .The door moves on nylon wheels within a single piece aluminium extruded track. Size is (1500 x 2100 ) <br>

od315028/2020_2021 Surgeon Control Panel & Distribution Board :Providing, Fixing, Supply, Installation, testing and Commissioning of Membrane type Surgeon Control Panel( 6 services ) ,mounted flush in the theatre wall alongwith Distribution Board comprising of the following : -1 No Day time Clock (Digital) -1 No Lapse Time Clock (Digital) -1Hands free telephone -1 No Medical Gas Alarm -1 Set indicator for temperature & humdity display -1 Peripheral Lighting On/Off with dimming Control

od315029/2020_2021 X Ray View Box:Providing, Fixing, Supply, Installation, Testing and Commissioning of Two Plate dimmable X-Ray viewing screen (948mm x 648mm) designed to provide a high level of control luminance without flicker. (Dimming Range 3-100%) <br>

od315030/2020_2021 Pressure Relief Damper:Providing, Fixing, Supply and Installation and Commissioning of proper Pressure Relief Dampers having multi 304 graded stainless steel blades for maintaining the positive pressure inside the operation theatre

od315032/2020_2021 Operating Writing List Board :Providing, Fixing, Supply and Installation of Operating Writing List Board of size ( 948mm x 648mm )

od315033/2020_2021 Peripheral Lighting( LED ):Recess mounted IP54 protocol, non-hygroscopic peripheral lights for clean room application each set having LED Lights with dimmer control (Suitable for Clean room Class 100 application)<br>

od315034/2020_2021 Single Arm Pendant :Single Arm moveable pendant with 1000 mm long arm with Horizontal movements having weight carrying capacity of the arm will not be less than 100 Kgs, one monitor shelf and provision for six electrical sockets 5/15 Amp, and all required gas outlets.<br>

od315035/2020_2021 Scrub Sinks:2 bay Surgical Scrub Sink made out of 304 Stainless Steel & seamless welded construction polished to a satin finish which is foot operated <br>

od315036/2020_2021 Hatch Box with Electronic Interlocking and UV Light - Indigenous:Providing, fixing, supply and installation of dirty hatch box made out of SS 304 for dispoasl of dirty linen /waste.Each Hatch will be equipped with two doors and the door will be operated electronically .The Hatch will be designed in such a way that only one door will be opened at one time.The UV light wiil be so installed that it is kept on while both the doors are closed ,this UV light has to be automatically turned off in case of opening of either of the doors. There shall be indicators on both sides of the OT so that door open/close status can be monitored from both ends.

od315037/2020_2021 Storage Unit:Providing supply and installation of storage unit - ( 1700 x 900 x 350 ) made of 1.5 mm thick SS Sheet with sterile surface coating ,complete with all accessories.<br>

od322901/2020_2021 Operation Theatre Light:Supply, Installation, Testing and Commissioning of Double dome surgical Light with each dome having capacity of 1,60,000 LUX.

od315038/2020_2021 Electrical Wiring, Sockets with Distribution Board inside Operation Theatre:Providing and Installing of Distribution Board with MCB and ELCB, Electrical Wiring inside Operation Theater including Sockets & Switches<br>

MINOR OPERATION THEATRE

od323047/2020_2021 PCGI Swing Door:Supply, Installation, and Commissioning of PCGI hinge door of approved colour of Size 1500mm x 2100mm

od323048/2020_2021 Surgeon Control Panel & Distribution Board "Providing, Fixing, Supply, Installation, testing and Commissioning of Membrane type Surgeon Control Panel( 6 services ) ,mounted flush in the theatre wall alongwith Distribution Board comprising of the following : -1 No Day time Clock (Digital) -1 No Lapse Time Clock (Digital) -1 Peripheral Lighting On/Off with dimming Control<br>

od315310/2020_2021 Peripheral Lighting ( LED ):Recess mounted IP54 protocol, non-hygroscopic peripheral lights for clean room application each set having LED Lights with dimmer control (Suitable for Clean room Class 100 application)

od315312/2020_2021 Scrub Sinks:1 bay Surgical Scrub Sink made out of 304 Stainless Steel & seamless welded construction polished to a satin finish which is foot operated <br>

od323054/2020_2021 Operation Theatre Light:Supply, Installation, Testing and Commissioning of Single dome surgical Light with each dome having capacity of 1,40,000 LUX.<br>

od315313/2020_2021 Electrical Wiring, Sockets with Distribution Board inside Operation Theatre:Providing and Installing of Distribution Board with MCB and ELCB, Electrical Wiring inside Operation Theater including Sockets & Switches

EMERGENCY OPERATION THEATRE

od319302/2020_2021 Construction Material for Ceiling Cladding:Supply, installation, Testing and Commisioning of Pre Fabricated Modular Operation Theatre Ceiling with 50mm thick puff Panel of 0.8mm EGP sheet on front side and back side each. Filling of all joints and cavities with epoxy filler and sanded flush to provide a seamless finish .Applied with minimum three coats of Antibacterial & Antifungal<br>paint ,ceiling<br>system and door frames by 25mm to provide a continous sealed surface

od322848/2020_2021 Complete Plenum System with Hepafilters-Indigenous:Supply , installation, Testing and Commissioning of Air Supply (2400 mm X 2400 mm) ceiling for air distribution system with aluminium complete with 8 Nos. Mini Pleat Flange Type HEPA Filters ( efficiency 99.97% down to 0.3 microns ) complete.For Distribution of supply/ return air flow as follow. a) 30% of return air exhausted through blower near the AHU. b). 30% Fresh air will be mixed in mixing chamber.c). 70% cooling air will be circulating from AHU.

od315104/2020_2021 Manual Hermetically Sealing Sliding Door:Providing, Fixing, Supply, Installation, and Commissioning of Automatic Hermetically Sealing Sliding Door , having high pressure laminate on both sides that could withstand high abrasion , vision panels (300x300mm) , for smooth sliding .The door moves on nylon wheels within a single piece aluminium extruded track. Size is (1500 x 2100 ) <br>

od315028/2020_2021 Surgeon Control Panel & Distribution Board :Providing, Fixing, Supply, Installation, testing and Commissioning of Membrane type Surgeon Control Panel( 6 services ) ,mounted flush in the theatre wall alongwith Distribution Board comprising of the following : -1 No Day time Clock (Digital) -1 No Lapse Time Clock (Digital) -1Hands free telephone -1 No Medical Gas Alarm -1 Set indicator for temperature & humdity display -1 Peripheral Lighting On/Off with dimming Control

od315029/2020_2021 X Ray View Box:Providing, Fixing, Supply, Installation, Testing and Commissioning of Two Plate dimmable X-Ray viewing screen (948mm x 648mm) designed to provide a high level of control luminance without flicker. (Dimming Range 3-100%) <br>

od315030/2020_2021 Pressure Relief Damper:Providing, Fixing, Supply and Installation and Commissioning of proper Pressure Relief Dampers having multi 304 graded stainless steel blades for maintaining the positive pressure inside the operation theatre

od315032/2020_2021 Operating Writing List Board :Providing, Fixing, Supply and Installation of Operating Writing List Board of size ( 948mm x 648mm )

od315033/2020_2021 Peripheral Lighting( LED ):Recess mounted IP54 protocol, non-hygroscopic peripheral lights for clean room application each set having LED Lights with dimmer control (Suitable for Clean room Class 100 application)<br>

od315034/2020_2021 Single Arm Pendant :Single Arm moveable pendant with 1000 mm long arm with Horizontal movements having weight carrying capacity of the arm will not be less than 100 Kgs, one monitor shelf and provision for six electrical sockets 5/15 Amp, and all required gas outlets.<br>

od315035/2020_2021 Scrub Sinks:2 bay Surgical Scrub Sink made out of 304 Stainless Steel & seamless welded construction polished to a satin finish which is foot operated <br>

od315036/2020_2021 Hatch Box with Electronic Interlocking and UV Light - Indigenous:Providing, fixing, supply and installation of dirty hatch box made out of SS 304 for dispoasl of dirty linen /waste.Each Hatch will be equipped with two doors and the door will be operated electronically .The Hatch will be designed in such a way that only one door will be opened at one time.The UV light wiil be so installed that it is kept on while both the doors are closed ,this UV light has to be automatically turned off in case of opening of either of the doors. There shall be indicators on both sides of the OT so that door open/close status can be monitored from both ends.

od315037/2020_2021 Storage Unit:Providing supply and installation of storage unit - ( 1700 x 900 x 350 ) made of 1.5 mm thick SS Sheet with sterile surface coating ,complete with all accessories.<br>

od322901/2020_2021 Operation Theatre Light:Supply,Installation,Testing and Commissioning of Double dome surgical Light with each dome having capacity of 1,60,000 LUX.

od315038/2020_2021 Electrical Wiring, Sockets with Distribution Board inside Operation Theatre:Providing and Installing of Distribution Board with MCB and ELCB, Electrical Wiring inside Operation Theater including Sockets & Switches<br>

MEDICAL GAS DISTRIBUTION WITH PIPELINE SYSTEM

od318450/2020_2021 OXYGEN SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of 16 cylinder (8 + 8) Oxygen manifold supply with all necessary controls and safety fittings.&lt;br&gt;Make: Medflow/ MR/Aktive/MPS/ Metro Medi Systems&lt;br&gt;

od318451/2020_2021 OXYGEN SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of 1500 lpm deliver capacity manifold control panel, control panel should have all necessary controls and safety fittings.&lt;br&gt;Make: Medflow/ MR/Aktive/MPS

od318452/2020_2021 OXYGEN SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of 1 x 6 cylinder Oxygen manifold supply (Emergency reserve oxygen supply) with all necessary controls and safety fittings.&lt;br&gt;Make: Medflow/ MR/Aktive/MPS/ Metro Medi Systems

od318454/2020_2021 OXYGEN SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Surface mounted front loading Oxygen outlets as per HTM/ EN / NFPA (first and second fix assembly)&lt;br&gt;Make: Medflow/ MR/Aktive/MPS

od318455/2020_2021 NITROUS OXIDE SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of 4 cylinder (2 + 2) Nitrous Oxide manifold supply with all necessary controls and safety fittings.&lt;br&gt;Make:Medflow/ MR/Aktive/MPS/ Metro Medi Systems

od318456/2020_2021 NITROUS OXIDE SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of 2 cylinder Nitrous Oxide manifold supply (Emergency reserve Nitrous Oxide supply) with all necessary controls and safety fittings.&lt;br&gt;Make: Medflow/ MR/Aktive/MPS/ Metro Medi Systems

od318457/2020_2021 NITROUS OXIDE SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of 500 lpm deliver capacity manifold control panel (Semi Auto Matic), control panel should have all necessary controls and safety fittings. &lt;br&gt;Make: Medflow/ MR/Aktive/MPS

od318458/2020_2021 NITROUS OXIDE SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Nitrous Oxide cylinder (D type) with all necessary controls and safety fittings.(Full Cylinder)&lt;br&gt;Make: Euro Tech or Equivalent approoved by Engineer in Charge

od318459/2020_2021 NITROUS OXIDE SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Surface mounted front loading outlets as per HTM/ EN / NFPA (first and second fix assembly)&lt;br&gt;Make: Medflow/ MR/Aktive/MPSMedflow/ MR/Aktive/MPS/S kumar&lt;br&gt;&lt;br&gt;

od318460/2020_2021 MEDICAL AND SURGICAL AIR SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of air cooled silenced reciprocating oil free air compressors, each with 5 hp motor capacity. Total estimated demand for the plant is 600 lpm. The compressor should have all necessary controls and safety fittings.&lt;br&gt;Make: Aneast Iwata/IR/ ELGI

od318461/2020_2021 MEDICAL AND SURGICAL AIR SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Air receiver, Vertically mounted welded carbon steel, capacity of 1000 litres and receiver should have all necessary controls and safety fittings with an automatic drain with manual by-pass.&lt;br&gt;Make: Air Tech/Multi tech/ Reliable

od318462/2020_2021 MEDICAL AND SURGICAL AIR SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Duplex air filters, pre-filter, oil filter, dust filter, activated carbon filter and bacterial filter. Each filter should be fitted with differential pressure gauges to monitor filter performance with all necessary controls and safety fittings.&lt;br&gt;Make: Trident/Ultra filter/ Reliable

od318463/2020_2021 MEDICAL AND SURGICAL AIR SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Air dryer system, capacity of each should be 100% of plant design flow (600lpm). &lt;br&gt;Make: Air Tech/Multi tech/ Reliable/Trident

od318464/2020_2021 MEDICAL AND SURGICAL AIR SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Surface mounted front loading double locked outlets, as per HTM/ EN / NFPA (first and second fix assembly)&lt;br&gt;a) Medical Air-7 bar&lt;br&gt;Make: Medflow/ MR/Aktive/MPS/S kumar

od318465/2020_2021 MEDICAL AND SURGICAL AIR SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Surface mounted front loading double locked outlets, as per HTM/ EN / NFPA (first and second fix assembly)&lt;br&gt;a) Medical Air-4 bar&lt;br&gt;Make: Medflow/ MR/Aktive/MPS/S kumar

od318466/2020_2021 MEDICAL AND SURGICAL AIR SYSTEM&lt;br&gt;Supply and installation of Duplex pressure regulating system, should have Pressure regulator, Isolation valve, Pressure indicator for Medical Air regulation with an by pass arrangement. Which includes 4 Nos of isolation valve, 2 nos of regulators, 2 nos of pressure indicator and 2 nos of over pressure shut off.&lt;br&gt;Make:Mediline/ MR/Aktive/MPS/ Jenatics

od318467/2020_2021 VACCUM SYSTEM&lt; br&gt;Supply,Installation, Testing and commissioning of vacuum pumps should be air cooled type, each with 5 Hp motor capacity and operation at nominal vacuum level of between 475 to 450 mm Hg, total demand for plant is approx 600 lpm. The pump inlet should be filtered and the exhaust should incorporate non-return valves to protect both the vacuum system. &lt;br&gt;Make: IR

od318468/2020_2021 VACCUM SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of vacuum receiver, Vertically mounted Mild steel, receiver capable of supply 1500 liters at 400 mm hg pressure and receiver should have all necessary controls and safety fittings.&lt;br&gt;Make: Air Tech/Multi tech/Reliable

od318469/2020_2021 VACCUM SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Medical bacterial filters with secreation trap. each containing a replaceable filter element and incorporating a moisture drainage trap bowl. &lt;br&gt;Make: Trident

od318470/2020_2021 VACCUM SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Combined Electrical Control Panel for Vacuum System &amp; Compressed Air (Cascading / seq.) complete with plant Room wiring.&lt;br&gt;Standard make:Schematic or equivalent approoved by Engineer in Charge

od318471/2020_2021 VACCUM SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Surface mounted front loading double locked Vacuum out lets, as per HTM/ EN / NFPA (first and second fix assembly)&lt;br&gt;Make: Medflow/ MR/Aktive/MPS

od318472/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Copper Pipe &apos;Lloyd Certified&apos; as per HTM/ EN / NFPA for medical gas services. Pipes shall be priced for all necessary supports, standard fittings.&lt;br&gt;54 mm OD x 1.2 mm thick&lt;br&gt;Make:Mexflow or Equivalent approoved by Engineer in Charge

od318473/2020_2021 PIPELINE DISTRIBUTIONSYSTEM&lt;br&gt;Supply, Installation,Testing and commissioning of Copper Pipe &apos;Lloyd Certified&apos; as per HTM/ EN / NFPA for medical gas services. Pipes shall be priced for all necessary supports, standard fittings.&lt;br&gt;42 mm OD x 1.2 mm thick&lt;br&gt;Make:Mexflow or Equivalent approoved by Engineer in Charge

od318474/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Copper Pipe &apos;Lloyd Certified&apos; as per HTM/ EN / NFPA for medical gas services. Pipes shall be priced for all necessary supports, standard fittings.&lt;br&gt;28 mm OD x 0.9 mm thick&lt;br&gt Make:Mexflow or Equivalent approoved by Engineer in Charge

od318475/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Copper Pipe &apos;Lloyd Certified&apos; as per HTM/ EN / NFPA for medical gas services. Pipes shall be priced for all necessary supports, standard fittings.&lt;br&gt;22 mm OD x 0.9 mm thick&lt;br&gt;Make:Mexflow or Equivalent

od318476/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Copper Pipe &apos;Lloyd Certified&apos; as per HTM/ EN / NFPA for medical gas services. Pipes shall be priced for all necessary supports, standard fittings.&lt;br&gt;15 mm OD x 0.9 mm thick&lt;br&gt;Make::Mexflow or Equivalent approoved by Engineer in Charge

od318477/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Copper Pipe &apos;Lloyd Certified&apos; as per HTM/ EN / NFPA for medical gas services. Pipes shall be priced for all necessary supports, standard fittings.&lt;br&gt;12 mm OD x 0.7 mm thick&lt;br&gt;Make:Mexflow or Equivalent approoved by Engineer in Charge

od318478/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Isolation Valve assembly as per HTM/ EN / NFPA for medical gas services. All valve should be gas specific.&lt;br&gt;Make: RB/RN/conex&lt;br&gt;54mm

od318479/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Isolation Valve assembly as per HTM/ EN / NFPA for medical gas services. All valve should be gas specific.&lt

od318480/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Isolation Valve assembly as per HTM/ EN / NFPA for medical gas services. All valve should be gas specific.&lt

od318481/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Isolation Valve assembly as per HTM/ EN / NFPA for medical gas services. All valve should be gas specific.&lt;br&gt;

od318482/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of Isolation Valve assembly as per HTM/ EN / NFPA for medical gas services. All valve should be gas specific.&lt;br&gt;

od318483/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply and installation of AVSU box (valve boxes) with all its accessories with valve and pressure / vacuum gauges, NIST connectors with lockable arrangement and breakable glass cover.&lt;br&gt;5 gas services&lt;br&gt

od318484/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply and installation of AVSU box (valve boxes) with all its accessories with valve and pressure / vacuum gauges, NIST connectors with lockable arrangement and breakable glass cover.&lt;br&gt;4 gas services&lt;br&gt

od318485/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply and installation of AVSU box (valve boxes) with all its accessories with valve and pressure / vacuum gauges, NIST connectors with lockable arrangement and breakable glass cover.&lt;br&gt;3 gas services&lt;br&gt

od318486/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply and installation of AVSU box (valve boxes) with all its accessories with valve and pressure / vacuum gauges, NIST connectors with lockable arrangement and breakable glass cover.&lt;br&gt;2 gas services&lt;br&g

od318487/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Providing and fixing alarm system for Medical gas ALARM system complete consisting of pressure sensors, panel and the control cabling, all wiring shall be within 1mm sq multi core data cable, PVC pipe for data cable. Panel shall be self contained low voltage (less than 24 V)&lt;br&gt;5 gas services&lt;br&gt;

od318488/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Providing and fixing alarm system for Medical gas ALARM system complete consisting of pressure sensors, panel and the control cabling, all wiring shall be within 1mm sq multi core data cable, PVC pipe for data cable. Panel shall be self contained low voltage (less than 24 V)&lt;br&gt;4 gas services&lt;br&gt

od318489/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Providing and fixing alarm system for Medical gas ALARM system complete consisting of pressure sensors, panel and the control cabling, all wiring shall be within 1mm sq multi core data cable, PVC pipe for data cable. Panel shall be self contained low voltage (less than 24 V)&lt;br&gt;3 gas services&lt;br&gt

od318490/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Providing and fixing alarm system for Medical gas ALARM system complete consisting of pressure sensors, panel and the control cabling, all wiring shall be within 1mm sq multi core data cable, PVC pipe for data cable. Panel shall be self contained low voltage (less than 24 V)&lt;br&gt;2 gas services&lt;br&gt

od318491/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, Installation, Testing and commissioning of plant room alarm with five gas configration.&lt;

od318493/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply, installation, testing nd commissioning of back Pressure Compensated Flow meter shall be of accurate gas flow measurement and control within a range of 0-15 liters per minute for use in a variety of respiratory therapy.&lt;br&gt;

od318494/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;br&gt;Supply installation and testing of ward vacuum unit shall include vacuum regulator along with 0-760 mm of Hg vacuum gauge of 2 &frac12;&rdquo; size dial,600 ml capacity reusable plastic collection bottle with overflow safety trap with plastic slide wall mounted type.&lt;br&gt

od318495/2020_2021 PIPELINE DISTRIBUTION SYSTEM&lt;Supply , Installation and testing of Theater vacuum Unit. It shall be trolley mounted. The unit shall include one regular having gauge and mounted on the trolley stand, having two reusable each 2000 ml plastic collection bottles mounted on the base of trolley unit and connected with regulator &amp; low pressure tube inter-connections

LABOUR ROOM

12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

od319013/2020_2021 Swing Doors:"Supply, Installation, Testing and Commissioning of Hermetically Sealed<br>Swing door, having SS 304 Grade sheets on both sides that could withstand high abrasion , vision panels<br>(300x300mm) , for smooth sliding . Size is (1500 x 2100 ) <

od319015/2020_2021 Manual Surgical Scrub Sink<br>:"2 bay Surgical Scrub Sink made out of 304 Stainless<br>Steel & seamless welded construction polished to a satin finish which is operated manually

OT AHU

od156945/2021_2022 Supply, Installation, testing commissioning of factory built Ceiling Suspended/Floor mounted DX double Skin horizontal/vertical Air handling units made of 40mm thick panels consisting of pre plasticized GI casing of thickness 0.8mm outside layer and inner layer shall be of 0.8mm plain SS sheet with polyurethane form(PUF) insulation factory injected between them by injection moulding machine with thermal break profile complete with fan section with backward curved plug fans suitable for static pressure as required with VFD drives , coil section with aluminium finned copper tubes (min. 10 fins per inch, tube thickness not less than 0.5mm),Cooling coil of 8 rows deep, filter section with 50mm thick metal viscous/washable synthetic type air prefilters (10 micron) & 5 micron fine filters, mixing box with fresh air intakes with dampers,drain connections, SS drain pan(18G) with PUF insulation, TEFC sq.cage induction motor of efficiency class IE3 suitable for 415+-10% volts, 50 Hz, 3 phase AC supply including mounting and fixing arrangements, anti vibration springs/ isolator bearings , strip heater capacity 3x1.5KW, germicidal UV-C lamps etc complete as per specification and of following capacities.The cost shall be inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete installation. Only HVAC application VFDs shall be used&Horizontal Ceiling Suspended /Floor Mounted AHU 11 TR/ 4500 CFM/ 8 RD/ 150 mm wg TSP

od156946/2021_2022 Supply, Installation, testing commissioning of factory built Ceiling Suspended/Floor mounted DX double Skin horizontal/vertical Air handling units made of 40mm thick panels consisting of pre plasticized GI casing of thickness 0.8mm outside layer and inner layer shall be of 0.8mm plain SS sheet with polyurethane form(PUF) insulation factory injected between them by injection moulding machine with thermal break profile complete with fan section with backward curved plug fans suitable for static pressure as required with VFD drives , coil section with aluminium finned copper tubes (min. 10 fins per inch, tube thickness not less than 0.5mm),Cooling coil of 8 rows deep, filter section with 50mm thick metal viscous/washable synthetic type air prefilters (10 micron) & 5 micron fine filters, mixing box with fresh air intakes with dampers,drain connections, SS drain pan(18G) with PUF insulation, TEFC sq.cage induction motor of efficiency class IE3 suitable for 415+-10% volts, 50 Hz, 3 phase AC supply including mounting and fixing arrangements, anti vibration springs/ isolator bearings , strip heater capacity 3x1.5KW, germicidal UV-C lamps etc complete as per specification and of following capacities.The cost shall be inclusive of VFD starter panel in a separate enclosure wit necessary rating incomer isolator /MCCB /contactor with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete installation. Only HVAC application VFDs shall be used&Horizontal Ceiling Suspended /Floor Mounted AHU 10 TR/ 4300 CFM/ 8 RD/ 150 mm wg TSP

od156947/2021_2022 Supply, Installation testing and commissioning of the air cooled outdoor unit (condensing unit). It shall be of corrosion resistant galvanized powder coated or equivalent sheet steel assembly installed on suitable vibration isolators and comprising of energy efficient inverter type Scroll compressor with controls such as thermal protector, HP/LP cutouts, Pressure relief valve and condenser fan unit; the units shall have integral refrigerant copper piping within compressor and condenser and accessories such as refrigerant shut off valves at compressor / compressors and liquid refrigerant outlet if required .filter dryer, with R 410 A refrigerant; Cooling fans shall have protective metal frame.The Outdoor units within Sunshade and on Terrace shall be installed on MS angle iron frame duly corrossion proof painted and supplied as welded structure which shall be securely grouted on floor and duly painted with anti-corrosive paint; the frame shall be isolated from floor through adequate vibration isolation; Price shall be inclusive of all required MS supports.Rates shall be including supply and commissioning of matching rated factory supplied Electrical Starter Control Panel. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 deg C ambient temperature without tripping. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 Note: Control cables connecting the IDU and the ODU 6 SMG GI wire loop Earthing shall be included in Split unit cost and on lot basis and run on the Power cable trays with adequate supports and electrical protection.10TR - Condensing unit

od156948/2021_2022 Supply, Installation testing and commissioning of the air cooled outdoor unit (condensing unit). It shall be of corrosion resistant galvanized powder coated or equivalent sheet steel assembly installed on suitable vibration isolators and comprising of energy efficient inverter type Scroll compressor with controls such as thermal protector, HP/LP cutouts, Pressure relief valve and condenser fan unit; the units shall have integral refrigerant copper piping within compressor and condenser and accessories such as refrigerant shut off valves at compressor / compressors and liquid refrigerant outlet if required .filter dryer, with R 410 A refrigerant; Cooling fans shall have protective metal frame.The Outdoor units within Sunshade and on Terrace shall be installed on MS angle iron frame duly corrossion proof painted and supplied as welded structure which shall be securely grouted on floor and duly painted with anti-corrosive paint; the frame shall be isolated from floor through adequate vibration isolation; Price shall be inclusive of all required MS supports.Rates shall be including supply and commissioning of matching rated factory supplied Electrical Starter Control Panel. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 deg C ambient temperature without tripping. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 Note: Control cables connecting the IDU and the ODU 6 SMG GI wire loop Earthing shall be included in Split unit cost and on lot basis and run on the Power cable trays with adequate supports and electrical protection.11TR - Condensing unit

od156949/2021_2022 Supply, installation, balancing and commissioning of factory fabricated Aluminium sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Aluminium Ducting 20G

od156950/2021_2022 Supply, installation, balancing and commissioning of factory fabricated Aluminium sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Aluminium Ducting 22G

od156951/2021_2022 SITC of Powder Coated Extruded Aluminium return Air Grill with horizontal fixed bars and end flanges

od156952/2021_2022 SITC of Fresh Air arrangements with bird screen and VCD<

od156953/2021_2022 SITC of Extract Air arrangements with Louvers, back draft dampers and VCD

od156954/2021_2022 SITC of Powder Coated Extruded Aluminium Volume Control Dampers complete with flanges, channel control levers suitable for duct mounting

od156955/2021_2022 Supplying and fixing of following thickness duly laminated aluminium foil of mat finish closed cell Nitrile rubber(Class O) insulation on existing duct after applying suitable adhesive for Nitrile rubber. Density of insulation material shall be between 40 to 55 Kg/m3.The joints shall be sealed with 50mm wide and 3mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.13 mm thick Anti Microbial Nitrile Rubber insulation (Duct run in A/c area)

od156956/2021_2022 Supplying and fixing of following thickness duly laminated aluminium foil of mat finish closed cell Nitrile rubber(Class O) insulation on existing duct after applying suitable adhesive for Nitrile rubber. Density of insulation material shall be between 40 to 55 Kg/m3.The joints shall be sealed with 50mm wide and 3mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.19 mm thick Anti Microbial Nitrile Rubber insulation (Duct run in Non-A/c area)

od156957/2021_2022 Supply & fixing of 10 mm thick open cell nitrile rubber form with density 140-180kg/m3 along with antimicrobial product protection as acoustic insulation for ducts using suitable adhesive as per the recommendation of the insulation manufacturer

od156958/2021_2022 SITC of Flexible Connection made out of fire resistant flexible double canvas sleeve

od156959/2021_2022 Supply, installation, testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for DX AHU system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with classO closed cell elastomeric nitrile rubber tubular sleeve of 19mm thickness for suction and liquid lines, all accessories as per specification etc. as required.( Suction Line )

od156960/2021_2022 Supply, installation, testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for DX AHU system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with classO closed cell elastomeric nitrile rubber tubular sleeve of 19mm thickness for suction and liquid lines, all accessories as per specification etc. as required. (Liquid Line)

od156961/2021_2022 Supply,Laying and Fixing of Power and Control cabling between indoor and outdoor units with required specification

od156962/2021_2022 SITC of 32mm OD UPVC SCH 40 pipe with 12mm thick aniti microbial nitrile rubber sleeve insulation for condensate drain piping of AHUs to the nearest drain point.

RAJAN P