COMPREHENSIVE MAINTENANCE OF B R NATURE WORKS IE PARAPET REPAIR SUNKEN TREATMENT SANITARY FITTINGS ATT JOINERY PERIODICAL SERVICES ETC AT ZONE A RESIDENTIAL AREA AND

Amount

Dismanteling of Asbestos cement (corrugated semicorrugated etc ) sheets in roof covering complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M/L preparing newly concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer.

M/L preparing old painted concrete surfaces such as chequerd tiles, paver blocks, kerb stones etc and similar surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided

M & L RCC type B-1, 1:2:4 (20mm graded stone aggt) for slabs supports on walls, fins, facia, chajjas, shelves, drain covers, drain slabs, manhole covers and similar nature work complet all as specified and directed

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified and directed.

Use & waste of form work to to edge of concrete flats etc exc 10 cm but not exc 20 cm wide/thick for fair finished surface of concrete all as specified.

M&L for S&F Factory made precast cover slab in pcc 1:2:4 Type B1 using 20mm agg for drains heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with perforated hole or as per the direction given by the Engineer-in-charge complete all as specified and directed.

Repairing of rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightering nuts and bolts, replacement of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter for smooth functioning size of rolling shutter n.exc 6sqm each all as directed by engineer-in-charge.

S&F in repairs mild steel plain sheets covering to door shutter and top cover of rolling shutter cover cut to size, edges beaded as directed, holes punched all as specified

M&L for preparation of old painted steel or iron surfaces as in railing, rolling shutters etc of any description over 10cm width or girth and applying two coat of synthetic enamal paint of tint as approved complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc.

M&L for brick work straight or curved on plan exc 6m mean radius in cement mortar (1:4) with Sub class ‘B’ brick including manhole raising, footpath, etc complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/loose soil n. exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25 cm, watering and removing surplus soil all as specified.

M & L cement concrete (1:4:8) type E-2 using 40mm graded stone aggt as in foundation filling, mass concrete and sub floors etc. complete all as specified and directed. .

S &F structural steel work in tubular trusses, posts, purlins, rafters, framed work in truss etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 complete all as specified and directed. .

M & L mild steel work for flat iron fillets as in wind ties for roof coverings including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. .

M&L for Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, angle post etc complete all as specified and directed.

S & F Framed work as in Mild Steel Gate of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills and similar work etc Gde Fe 410-OW (Gde E-250) quality A complete drilled for fixing of steel sheeting or other covering including welding work ,(PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks,hinges,necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as specified and directed.

S&F mild steel work as in joist channels, angle or tee section, fixed independently w/o connecting plate conforming to Fe.290.Gde-E-165, incl cutting tops to shape as directed, drilling holes,notching for wire, welding work etc. flat iron fillets incl all necessary drilling, bolting or riveting, etc. ,drilled and countersunk for balusters running bars, nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts, and similar work including necessary cutting, drilling, welding etc complete all as specified and directed.

Taking down cement plaster, pointing, on brick or stone/concrete walls, drain surfaces etc including racking out joints, hacking for key, scrubing down with water etc in any position complete all as specified and directed. Note :- Rate also including for necessary scaffolding/ Jholla work to carry out work upto a height of G+7 Floor.

M&L for 15 mm thick Rendering on brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick Rendering on brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coat of oil emulsion distemper of approved shade/tint over and including a coat of birla white wall care puty (applying additional coats wherever required, to achieve smooth surface) complete all as specified and directed.

M&L for preparation of newly plastered or unplastered wall surfaces and applying two coat of acrylic emulsion exterior quality over and including a coat of water based primer tint and pattern as approved by GE complete all as specified and directed. .

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surface and applying two coat of acrylic emulsion exterior quality over and including a coat of water based primer tint and pattern as approved by GE complete all as specified and directed. .

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including one coat of 1 mm thick birla wall care putty to achieve smooth finish complete all as specified and directed. & directed.

M&L 100 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in sub floors, filling and mass concrete etc complete all as specified and directed. .

M & L for machine made Rubber moulded precast concrete interlocking paver block (coloured),pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over and including 25mm average thickness sand cushioning complete all as spfd and directed.

Supply and fixing factory made chequered cement concrete coloured tiles 300mm x 300mm x 20 to 22 mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:4, complete all as specified and directed. & directed.

S&F in repair rotational moulded polythene water storage tank Cylindrical vertical with closed top hoisted and fixed in position 500 ltrs capacity including disonnecting and refixing the GI pipe and fittings complete all as specified and directed.

S&F in repair rotational moulded polythene water storage tank Cylindrical vertical with closed top hoisted and fixed in position 1000 ltrs capacity including disonnecting and refixing the GI pipe and fittings complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs ,cleaning,etc.and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to 500 ltrs capacity of tanks complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs ,cleaning,etc.and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 500 ltr to 1000 ltrs capacity of tanks complete all as specified and directed.

M&L for PCC type B1 1:2:4 (using 20mm graded agg) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelersm apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside Mod land from 5KM upto 20KM lead at municipal dumping ground complete as per direction of Engineer - in - charge.

M/L preparing old painted concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. and directed. Note :- Rate also including for necessary scaffolding/ Jholla work to carry out work upto a height of G+7 Floor.

S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified and directed. Note :- Rate also including for necessary scaffolding/ Jholla work to carry out work upto a height of G+7 Floor.

S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and directed. .

Complete removal of existing roof treatment including brick tile, mud fusca,PCC padding,cowa, lime concrete etc up to any thickness and depth of original roof slab and Clean up to existing RCC roof by steel wire brushes and surface washed with clean water and complete all as specified and directed. and directed by Engr-in- charge, and applying Water proofing treatmnet as under:- (a) Rendering 10mm thick in CM(1:4) mixed with water proofing compound @3% by weight of cement. (b) Applying a coat of approved bituminious primer @0.25 ltr/Sqm and allow to dry. (c) Supplying and laying polymeric 3mm thick APP water proofing membrane of weight not less than 3Kg/Sqm (d) Applying a coats of solar reflective bituminious aluminium paint @0.15 kg/sqm over the memberane complete all as specefied and directed by Engr in chrge.

M&L Complete removal of existing roof treatment including brick tile, mud fusca,PCC padding,cowa, lime concrete etc up to any thickness and depth of original roof slab and Clean up to existing RCC roof by steel wire brushes and surface washed with clean water and complete all as specified and directed. and directed by Engr-in- charge.

M&L PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in mass concrete over roof as in padding incl cement slurry over old RCC surface, surface fair finished even & smooth without using extra cement all as specified and directed by Engr-in- charge.

M&L 15 mm thick layer of screed bed/ bedding layer in CM 1:4 over concrete surfaces of roofs surface finished even and smooth mixed with WPC @ 3% by weight of cement complete all as specified and directed. (WPC will be measured and paid seperately)

M&L Applying a coat of approved bituminious primer @0.25 ltr/Sqm and allow to dry conforming to IS: 3384-1965 complete all as specified and directed.

M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat will be paid separately.)

Supplying and laying APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm ) laid on by torch forced application.The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction and 100mm overlap on all vertical surfaces/dado/parapets etc and sealing the overlaps by heating and fusing the layer of asphalt and melting the protective plastic film complete all as specified and directed.

M&L for 300x300x 20 to 22 mm thick Precast cement concrete tiles type B-1, 1:2:4 (10mm to 12.5mm graded stone aggregate) slab flooring, bedded over and including screed bed 20 mm cement mortar 1:4 , and pointed in cement mortar 1:3. complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L Cutting grooves in brick wall, for inserting APP membrane and other works 75mm wide and 65mm deep and shaping horizontal face of grooves and making good with cement mortar 1:3 or PCC 1:2:4. complete all as specified and directed.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight)

Removal of demolished material /Debris/Malba from site outside Mod land up to any lead at municipal dumping ground including loading, unloading and stacking at the destination and dumping of same without any extra cost complete all as specified and directed.

M&L for PCC type B1 1:2:4 (using 20mm graded agg) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelersm apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)n.exc 1.5sqm and making good to distrubed surface without any extra cost complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exc 1.5sqm but n.exc 4 Sqm and making good to distrubed surface without any extra cost complete all as specified and directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed.

M&L 2nd class hard wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as spd and directed

S & F pressed steel frames for doors with one or more rebates of size 125x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet all as spd and directed.

M&L Providing, cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete as specified, supplied and fixed complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made, 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton door shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing palin, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.20 (a) complete all as specified and directed.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F stainless steel butt hinges 100 mm long complete all as specified and directed.

S&F in repairs continous (piano) hinges mild steel bright finish or electro galvanised width of flaps (when open) 40 mm complete all as specified and directed.

S&F in repair waste fitting CP Brass 40mm dia for sink,basin brass chromium plated. complete all as specified and directed.

S&F in repair CP grating 125 mm dia with or without hole for waste pipe fixed on floor / nahani trap fixed with cement morter complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm all as specified.

S&F in repair aluminium (Etruded section body)door closer hydraulically regulated,designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

M&L for Welding in repair exc.2.5cm but n.exc.5cm in length of metal having thickness exc 6mm n.exc, 9mm complete all as specified and directed.

M&L for Running welding in repairs thickness of metal to be welded exc 6mm n.exc 9mm complete all as specified and directed.

S&F 18-19mm thick Medium density fibre board,exterior grade fixed with screws to timber frame work by taking out old unserviceable board from Kitchen cupboard/almiraha complete all as specified and directed.

S&F in repair plywood 6mm thick, grade BWP, type BB fixed with screw to timber frame work complete all as specified and directed

S&F in repairs S/S brackets for curtain rod for 20mm dia curtain rod all as spd and directed by Engr-in-Charge.

S&F in repair 20mm dia S/S curtain rods with fixing brackets, stops etc complete all as specified and directed

S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses complete all as specified and directed.Note:- (i) Rate also includes necessary scaffolding/Jhoola works to carry out work upto a hight G+7 floor

All as per ser item befor here-in-before but exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F 5 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) including rubber beading complete all as specified and directed.

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed.

S & F factory made solid pannel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gep insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification and drawing.

S&F 100 MM butt hinges,extruded alum alloy with galvanised mild steel hinge pin, anodised and fixed,type B-21 complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size aluminum handles cast type, anodized complete all as specified and directed.

S&F 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

M&L for gunniting to RCC wall and roof etc by removing loose concrete or plaster , cleaning surface, applying epoxy paint 40-50 micron thick AMATEC, derusting reinforcement by grit blasting, epoxy based bonding agent on old conc surfaces with SIKADUR-32@ 2% by wt of poly create and providing guniting 30mm thick in patches in CM (1:2) at a min pressure 2.5 Kg/cm2 and making surface even and smooth by rendering 20mm thick in CM (1:4) over guniting complete all as specified and as directed.

M & L in repairs for Providing precast cement concrete louvers and jallies, 25mm thick (measured solid), including all mouldings but excluding frame (precast frame shall be measured separately and paid for under item 04032) With B0 Type, 1:2:4 mix, (using 12.5 graded aggregate)set in cement mortar1;4 complete all as specified and directed.

S&F in repair rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 2000 ltrs capacity and disconnecting and refixing the GI pipe and fittings all as directed.

All as per Srl No 95.00 here-in-before but capacity of tank exc.1000 ltrs but n.exc. 2000 ltrs

S&F In repair 15 mm dia GI steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair GI steel tubing medium grade galvanised 20mm dia with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed.

S&F in repair PVC valve less 10ltrs capacity syphonic action type flushing cistern low level white with inlet ball valve float and handle push type including flush pipe 32mm dia and connection to WC complete all as specified and directed

S&F in repair angle valve 15mm dia cast copper alloy chromium plated fancy type with quarter turn screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs Bib taps 15mm dia chromium plated fancy type with quarter turn screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device.

Supply and fix in rep wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.

S&F in repair PVC(SWR) 75mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 600mm long with PTMT nuts complete all as specified and directed.

S&F in repair faucet health (hand jet) 15mm bore with 1mtr tube and fitting complete all as specified and directed.Make:Prayag/parryware/Essco

S&F in repairs chromium plated brass shower rose 125mm dia with swiveil joint complete all as specified and directed.

S&F in repair brass 15mm CP brass mixer fancy type quarter turn for mixing hot & cold water screwed down for iron pipe and fixed complete all as specification and directed. Make : Jaquar,Hindware,Plumber or equivalent in economical range.

S & F in repairs Wall mixture cromium plated fancy type quarter turn continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.Make : Jaquar,Hindware,Plumber or equivalent in economical range.

M&L for white cement in traps/sides of 'P' or 'S' trap/joint of flush pipes and WC and making good complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite stone 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cemen mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Including 20mm thick screed bed or bedding lay in CM 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and directed.

S&F in repairs sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joint fixed to wall complete all as specified and directed. Note : Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a hight G+7 floor.

S&F in repairs sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints fixed to wall complete all as specified and directed. Note : Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a hight G+7 floor.

S&F in repairs sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

S&F in repairs sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia pipe complete all as specified and directed.

All as per here-in-before but 100mm dia complete all as specified and directed.

Demolition of cement concrete (unreinforced) in Concrete of any description and in any position not otherwise specifically provided forcomplete.

M&L for water proofing treatment to sunken slab complete all as specified and as directed in the following operations:- (a) Rendering 15mm thick in CM 1:4 mixed with water proofing compound @1% by weight of cement including the cost of water proofing compound (b) After drying of plastered surface suitable primer such as multipias primer/ multiplas / cold sticker/multiplas blow bitumer 85/25 or 90/15 shall be coated on the surface. (c) MULTIPLAS @ 3Kg/sqm shall be unrolled over the coated surface (with overlap of 10cm) and bonded completely to the primed surface. The overlap shall them sealed by the tourch flame. (d) Toping with PLASFAL @ 1.20Kg/Sqm on MULTIPLAS. Plasfal memberance shall then bonded on top of MULTIPLAS blown bitumen on 85/25 or 90/15 shall be applied @ 1.20 Kg/Sqm on top of plasfal. The above water proofing treatment shall be carried out by a specialised agency as approved by GE.

M&L for Plain cement concrete 1:5:10 mix, type E-2 (using 40mm graded aggregate) as in filling of sunken portion complete all as specified and directed.

M&L for PCC 1:2:4 type (B 0) using 12.5 mm graded stone aggregate mixing with WPC levelling course in floor etc complete all as specified and directed.

Preparation of newly plastere wall surfaces and applying two coats of cement base paint over priming paint complete all as specified and directed.

S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Supply & fixed Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof walls 2 mm thickness,. Complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over new wooden surfaces of any descripition over 10cm width or girth including preparation of surfaces and including a coat of pink wood primer complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete complete all as specified and directed.

M&L 15mm thick Screed bed or bedding layer of cement mortar 15 mm thick for laying floor finishes in CM 1:6

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.06 sqm,vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl10mm thick cement mortar in CM 1:4 complete all as specified and directed.

M&L non skid ceramic coloured tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exc.0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc.0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300 X 200 X 7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or colour cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or colour cement to match complete all as specified and directed.

M/L Cement concrete type C2 1:3:6 (40mm graded aggregate) as in foundations, filling and mass concrete/Subbase complete all as specified and directed.

M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection,subbase etc complete all as specified and directed.

S&F in repairs of 32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified and directed.

S&F in repair fancy type chromium plated quarter turn two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

M & L for Applying silicon sealeant on joints of wall, cill, jambs roof, window etc. with sufficient quantity for proper sealing of joints complete all as specified and directed.

S&F in repairs Powder Coated(minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repair Powder Coated(minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F in repair Powder Coated(minimum thickness of powder coating 50 micron)aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F in repairs aluminium powder coated(minimum thickness of powder coating 50 micron) sliding window 3- track, 2 glass panel and 1 mesh panel sliding window aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F in repair aluminium powder coated grill 6x4.5 mm thick section 10cm centre to centre spacing complete with U-channel all round fixed in window with aluminium screws complete all as specified and directed.

S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete as directed and specified.

Supply and fix mild steel round bars 10mm dia FE 410W Gde E-250 quality A or Fe 290 gde E-165 cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips for man hole cover handle.

S&F in repair manually opening and closing roller type blinds of approved make with characteristic composition of fabric of polyster and nylone semi transperant type complete all as specified and directed.

S&F in repair vertical veniation blind consisting of aluminium head rail, vanes/louvers 4” wide of approved tint and traverse cord complete fixed in position complete all as specified and directed.

Dismantling wall/ceiling boarding, any description, fixed in any position with nails/screws/grid including taking down E/M fittings/fixtures on ceiling and refixing the same after completion of work to make it functional complete all as specified and directed.

Taking out for repairing of rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightning nuts and bolts, replacement of spring, greasing to movable parts and at guide channel, greasing the sides of the rolling shutter and re-fixing rolling shutter for smooth functioning size of rolling shutter not exceeding 25 Sqm each complete all as specified and directed.

S&F in repairs Welded steel wire fabric supplied and fixed complete to wood or steel members weight n.exc 4kg per sqm Note : Rate also includes for necessaryscaffolding /Jhoola work to carry out work upto a hight G+7 floor complete all as specified and directed.

M&L of voids in masonry using chemical emulsion one ltr per hole,at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1cement :2 coarse sand) to match the existing floors complete all as specified and directed.

M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solutiuon)@ 0.50 ltr/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Taking down old tarfelt water proofing treatment on roof surfaces and removed from site complete all as spd and directed.

M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.30 Kg/Sqm complete.

M&L for applying two coats of bitumen based aluminium painting on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed.

DR Buildcon (BID ID -3453603)

SARRAJ ENGINEERS AND CONTRACTORS (BID ID -3456204)