Annual maintenance of Sri Prasanna Venkateswara swamy Temple, Appalayagunta and TTD Shelter at Pudi for the year 2026-27

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work - Ordinary soil-Manual means up to 3m depth. Note: Cost of dewatering may be added, where required, up to 5% of labour cost. Assessment for dewatering shall be made as per site condition

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

-do - C.C.(1:2.5:5) -Grade M15

Randum Rubble masonry in Cement mortar (1:6) using granite stones from any source confirming to the relevant ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications (excluding cost of bond stones )

Construction of Brick Masonry in CM (1:5) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions.

- do- in CM (1:4) 12 mm thick

- do- in CM (1:4) 20 mm thick

Providing Flush Pointing with C.M(1:3) to Brick work or Coursed Rubble Masonry including cost and conveyance of all materials etc., complete as directed during execution.

Supply of the following Semi-Skilled workmen (2nd Class) required for maintenace works such as welding works, Stone works, Masonary works, Carpentry works etc., and other emergency works as and when entursted by the department during exeuction for all festivals through out the year.

Mason 2nd Class

Welder 2nd Class

Painter 2nd Class

Plumber 2nd Class

stone cutter 2nd Class

Carpenter 2nd Class

Supply of unskilled Workmen (Man / Woman Mazdoor) required for maintenace works and for polishing the brass grills, fixing MS Katanjanams works etc., and other emergency works as and when entursted by the department during exeuction for all festivals through out the year.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Grade-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply and fixing of stainless steel SS304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Labour charges for fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing to present seamless finish.

CUT STONE FLOORING 4" THICK : Supply, dressing, laying & jointing of hard granite stone slabs for flooring from Mulbagal quarry including cost and conveyance etc. complete with the following specifications.

a) The size of the stone slab should not be less than 0.61mx0.45m (2' 0"x1'-6")

b) The thickness of the stone slab should not be less than 100mm (4") in all sides

c) The top of the slab should be dressed with Palamana dressing including three line dressing properly

d)All the sides of the slabs should be dressed with Palamana dressing including three line dressing to a depth of 40mm (1½") from top surface to suit proper alignment and jointing with side slabs.

e) The slab should be laid horizontally and jointed properly to alignment over sand bed (excluding cost of sand bed),cement mortor bed.

f) The joint of the slab should not be more than 6mm (¼") thick.

g) The slab should be jointed with CM(1:3) and mortor should not come over the slab for the above item the rate is including cost and conveyance of all materials to site of work including necessary labour charges, dressing, laying, jointing but excluding cost of sand for bed, the bed will be paid under relevent item. (cement mortor of 0.005 cum/sqm should be used for joints ).

Note: While adding extra allowance over labour portion, the cost of stone may be deducted since, the rates are including cost of stone and labour rates.

2) Unless other wise specified granite stone slabs used for cut stone flooring shall be of the same size. The longitudinal joints between the rows shall be parallel to each other, of uniform thickness and perfectly straight throughout the length of the row, with the transverse joints at right angles to longitudinal joints. The rows may be laid parallel to the walls, diagonally or in any manner, with or without break joints as my be specified. However where the base concrete or sub-floor is laid with construction joints or expansion joints or in panels, the joints in the floor topping shall tally with those in the base concrete or sub-floor.

-do- with Palamana dressing including three line dressing

CUT STONE STEPS : Supply and dressing for laying of cut stone steps with hard granite stone slabs from Mulbagal quarry including cost and conveyance etc., complete with the following specifications.

a) The size of the stone step should not be less than 1.20mx0.38 (4'-0"x1'-3").

b) The thickness (rise) of the stone slabs should not be less than 150mm (6") in all sides.

c) The top surface of the stone slab 0.38m (1'-3") wide bottom bearing 75mm (3") wide to the full length of steps front face and two sides of the steps should be chiseled with Palamana dressing including three line dressing properly.

d) The steps should be laid and jointed in such a way that the riser should be 150mm (6") and tread 300mm (1'-0") over sand bed/ cement mortar bed excluding cost of sand bed/ cement mortar.

e) The joints of the steps should not be more than 6mm (1/4") mortar should not come over the stone. The steps should be jointed with cm(1:3).

f) The measurements of steps will be made for top surface only I.e.0.38m (1'-3") wide and length for the above item the rate includes cost and conveyance of all materials to site of work including necessary labour charges for dressing, laying, jointing but excluding cost of sand for bed/ cement mortar . The bed will be paid under relevent item . The cement of 0.00215 Cum/ Sqm should be used for jointing.(3.10 Kg.)

-do- with Palamana dressing including three line dressing

Supply of Good Gravel for Building / Road works

Supply of Quarry Rubbish (35a)

Supply M.S. Tubes & pipes of all diametres as per IS -1161

Supply of brass polishing cakes of approved quality and make including cost and conveyance, all incidental charges etc complete as directed during execution .

Supply of coir puri of best quality including cost and conveyance, all incidental charges etc,. Complete as directed during execution.

-do- Cotton rope of all dia.

Supply of turpentine oil of approved good quality and make including cost and conveyance etc., complete as directed during execution.

Supply of Welding electrodes 4 mm dia

Supply of Mild steel ( Powder coated ) Aldrop 200mm Long (IS 2681)

Supply of Aluminium Tower Bolt-10 mm Bolt (IS:204) 150 mm Long

Supply of Anodised Alluminium Door handles 100 mm long IS 208

Supply of Plain Float Glass 5mm thick Saint Gobian / Modiguard or equivalent.

Writing the sign boards, Direction boards and painting Rangolies over C.C road etc., with two coats of back ground one coat primary & one coat synthetic enamel paint over the sign boards with printing two coats with synthetic enamel paint over the back ground. The rate includes cost of paint, labour charges, scaffolding etc., required for the work. The paint should be done with first quality synthetic enamel paint of approved colour and make as directed during execution.

Writing the sign boards, Direction boards and painting Rangolies over M.S sheet etc., with two coats of back ground one coat primary & one coat synthetic enamel paint over the sign boards with printing two coats with synthetic enamel paint over the back ground. The rate includes cost of paint, labour charges, scaffolding etc., required for the work. The paint should be done with first quality synthetic enamel paint of approved colour and make as directed during execution.

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 3mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 3mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution.

Digital design, Supply and erection of flex sheet boards with back support of frame work made with 25mmx25mm MS square pipe (light weight) to erect all the specified places as directed by the department. The cost is including all materials, labour for printing, erection all materials, labour charges etc., complete as directed by the department .

Hire charges for supply, erection and removal of digital design flex boards with frame work made with of 25mmx25mm MS square pipe (light weight) with required back support to erect boards at specified places as directed by the department. The cost inclusive of materials ,labour for printing, erection and removal square pipe (light weight) after completion of the function.

Painting priming coat with ready mixed Cement primer for exterior grade - 2 (Water thinnable) for new plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution.

Painting two coats for old iron work with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Painting Two coats for External walls - old with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting two coats for old wood work & old plastered surface with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Flooring with granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply)

-do- Galaxy granite 18-20 mm thick up to 8'-00 (2.43m) (premium quality)

-do- telephone Black Granite 18-20 mm thick up to 2.43m

-do- Anti- skid Granite (Black ) 18-20 mm thick upto 2.43 M (For stair case)

-do- Multi Red colour Granite 18-20 mm thick upto 2.43 M

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum) 1. The owner should transport the JCB to the work spot at his own costs. 2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor. 4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above. 6. The Excavator- Loader (JCB) should have the Tacho metre and it should function properly.

Hire charges for engaging tractor withTrailer for conveyance of chain links & other materials etc. including loading unloading, all incidental charges etc,. complete as directed during execution.

Hire charges for engaging Welding Set including loading unloading, all incidental charges etc,. complete as directed during execution.

Hire charges of the Core Drilling Machine / Drilling eqipment including fuel charges etc., complete as directed during execution.

Hire charges for Crane 16T including loading unloading, all incidental charges etc,. complete as directed during execution.

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

Construction of pre-cast Fly ash cement/lime solid block masonry in C.M(1:8) using pre-cast cement blocks made with C.M(1:8) commercial quality of size 290 x 225 x 140 mm or any approved size including curing cost and conveyance of all materials, as directed during execution

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.

-do- Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing 28-30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame.

Supply of French Polish

Supply of ready mixed Synthetic Enamel paints in all shades Gr- I having VOC(volatile organic compound) content less than 50 grams / lit

Supply and fixing of 110 mm dia 3 M Single socket PVC /SWR pipes & fittings (as per ISI standards) 6 kg/cm2 (Type-B)

Supply and fixing of 75 mm dia 3 M Single socket PVC /SWR pipes & fittings (as per ISI standards) 6 kg/cm2 (Type-B)

Supply of 110 mm dia - Plain Bend 87.5 Degree - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of 110 mm dia - Door Bend 87.5 Degree - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of 110 mm dia - Single Tee with door - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of 110 mm dia - Coupler - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of 110 mm dia - Vent cowl - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of 75 mm dia - Plain Bend 87.5 Degree - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of 75 mm dia - Door Bend 87.5 Degree - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of 75 mm dia - Single Tee with door - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of 75 mm dia - Coupler - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of 75 mm dia - Vent cowl - U.V resistant UPVC SWR pipe fittings (as per BIS standards )

Supply of Best Teak Wood scantlings up to 2 mts

Supply of Best Teak Wood Planks any thickness

Providing screen cloth to vahana mandapam/kalyanotsava mandapam/ vaibhovotsava mandapam/vasantha mandapam stiched with canvas cloth/gada cloth on back side over that stiched with velvet cloth along with each 5” gold lining lace three line border alround front side of the screen etc., complete. The rate is including cost of velvet cloth., canvas cloth, gada cloth, gold lace and stiching, tying with cotton ropes and labour charges etc,. complete as directed during execution.

-do - Art work painting with proportionate relevant picture at front side of the screen.

-do- Art work with embroider as per the requirement at front side of the screen.

-do- plain screen cloth without art work as per the requirement.