WC4602 Renovation of Transit Camp Building

ATTACHMENTS General guidelines for filling up the Attachments

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)]

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3, 4, 5, 6, 7, 8, 9, 11, 12,13, 14, 15 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the Bidding Document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

8 Attachment 20: Unequivocal consent of the proposed Associate(s) for the purpose of executing the 'Second Contract' and /or 'Third Contract' as an independent Contractor (applicable to foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

9 Attachment 21: Capacity, Capability and Experience of Proposed Associate(s) (applicable for foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)]

Enter the details of the bidder below:

Specify type of Bidder Sole Bidder

Name of the Bidder

Address of Registered Office

Contact Details:

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-3 (QR)

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Qualifying Requirement Data)

Bidder’s Name and Address (Bidder) : To

Name: 0 Sr.GM(C&M)

Address: 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

In support of the Qualification Requirements (QR) for bidders, stipulated in Section-III of the Bidding Documents, we furnish herewith our QR data/details/documents etc. along with other information, as follows (The QR stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in Section-III shall prevail).

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status; #REF!

b) The principal place of business; #REF!

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

S No. Particulars For Individual Firm

1 Name of the Firm

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of the Agency

[Necessary documents to eatablish legal status of the bidder should be uploaded with the bid]

2.0 TECHNICAL REQUIREMENTS {Reference Section-III}

2.1 Bidder who wishes to participate in the tender should have successfully completed Civil works for any State/Central Govt. departments/ undertakings/ private organizations during last Five years as on the originally scheduled date of bid opening: One similar work of value not less than Rs. 50.77 Lakhs excl. GST or Two similar works, each of value not less than Rs. 31.73 Lakhs excl. GST or Three similar works, each of value not less than Rs. 25.39 Lakhs excl. GST

(a) Following documents shall be submitted by the bidder as evidence of above: (i) Completion certificate(s) from the client for the work inter alia indicating final executed amount and date of completion or any other document, authenticated by the client, containing relevant information to conclusively establish that the bidder has completed the requisite work(s) as per the requirement specified above. (ii) The copy of corresponding work order(s) shall also be submitted. Note: Contracts involving only excavation/earth work or only painting works will not be considered for technical experience.

2.2 Format for the Bidder for indicating its technical experience (in support of meeting the requirement of para 2.1 above is to be furnished, as applicable, using this format]

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

3.0 FINANCIAL REQUIREMENTS {Reference Section-III}

a) (i) The Minimum Annual Average Turnover* (MAAT) of the bidder for the best three (3) financial years out of the preceding five (5) financial years shall be: Rs. 95.19 Lakhs * Note- “Annual gross revenue from operation/gross operating income as incorporated in the profit &loss account excluding other income”.

Note: In case the bidder is a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of subsidiary company only (i.e. excluding its holding company).

RELAXATION FOR MSME BIDDERS MSMEsˆ / START Ups^-: MSEs$ and START Ups^ meeting the specified requirements at (I) Technical Experience above shall also be considered qualified if they meet 80% (Eighty percent) of the requirements as specified at para (II) above in financial position.

^ Start-Ups as defined by DPIIT, applicable as on the originally scheduled date of bid opening. $ MSE as defined in the bidding documents. Bidder shall furnish documentary evidence in support of the qualifying requirements stipulated above.

(a) Following documents shall be submitted by the bidder as evidence of above: i) Audited balance sheet and Profit & Loss Account for the preceding five (5) financial years. In case, the audited balance sheet for latest financial year is not available, a certificate from the Chartered Accountant on their letter head certifying the financial turnover for the latest financial year may be submitted. ii) In case, the bidder is not covered under compulsory tax audit under the IT act for a particular financial year, a copy of acknowledgement of income tax return filed for the corresponding period should also be submitted along with either certificate from Chartered Accountant certifying the turn over or print out of Form 26AS.

3.2 Format for the Bidder for indicating its Financial Criteria (in support of meeting the requirement of para 3.1 above is to be furnished, as applicable, using this format]

Financial Year Turnover

Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

(Use separate sheet for each experience/ Contract)

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-4

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Reason for change The change in Bid Prices if the deviation is withdrawn and the Bidder conforms to the Specifications

Any proposed deviation will be applicable only for the bidder whose bid is substantially responsive in accordance with Clause 22, Section ITB, Vol. I of the bidding documents. If a bid is not substantially responsive, it will be rejected and may not subsequently be made responsive by the bidder by correction of the non-conformity.

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-5

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Work Completion Schedule)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject package i.e., “Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS” for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-6

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-7

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] Attachment-8

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise)

Bidder’s Name and Address (Bidder) : To:

Contract & Material

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Southern Region -I Headquarters

0 Kavadiguda Main Road

0 Secunderabad - 500080 (Telangana)

I. We have read the provision in the Bidding Documents regarding furnishing the option for advance payment.

Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents,

we hereby confirm to opt the following:

Interest Bearing Initial Advance: Supply Portion

(Select from drop down list)

We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made Details

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3. Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

4. Permanent Account (PAN) No.

5. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

6 Name of the States/UT GSTIN number

a Andhra Pradesh

9. PF Registration No. of the Company

10. PF Regional Office covered (with Address)

11. Name of Contact Person

12. Telephone No(s)

13. Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account: Current Account

14. 9 digit MICR code printed at bottom in middle, next to cheque no.

15. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-9

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Additional Information)

Bidder’s Name and Address (Bidder) : To

Name : 0 Contract & Material

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region -I Headquarters

0 Kavadiguda Main Road

Secunderabad - 500080 (Telangana)

In support of the additional information required as per ITB Sub-Clause 9.3 (i) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

Certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

1.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder may result in rejection of Bid.

1.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years. A consistent history of awards invlolving litigation against the Bidder may result in rejection of Bid.

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Description of the plant for carrying out the work

Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.

3.0 OTHER INFORMATION

3.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

3.2 Financial Data:

Figures Rs in Million

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-10

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Integrity Pact - NOT Applicable

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between #REF! #REF!

Power Grid Corporation of India Limited #REF! #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

#REF! #REF! having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for “Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS” Package and Specification Number [Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] POWERGRID values full compliance with all relevant laws and regulations, and the principles of economical use of resources, and of fairness and transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : #REF!

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-11

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Further, we hereby confirm that except as mentioned in the Schedule – 4 (Alternative, Deviations and Exceptions to the Provisions) hereof and/or the Covering Letter, forming part of our First Envelope :

(i) there are no discrepancies/inconsistencies and deviations/omissions/ reservations to the Bidding Documents, in the Second Envelope bid;

We also confirm that in case any discrepancies/ inconsistencies and deviations/ omissions/ reservations, as referred to in para (i) and (ii) above, is observed in the Second Envelope, the same shall be deemed as withdrawn/rectified without any financial implication, whatsoever to POWERGRID. However, in case of any arithmetical errors, the same shall be governed as per the provision of ITB Sub-Clause 27.2 read in conjunction with BDS

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-10

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Safety Pact - separately attached herewith in Volume-III.

Date : 0 Printed Name : 0

Place : 0 Designation : 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-13

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Declaration regarding Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that we have read and abide by the Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID, as detailed herein below:

Code of Integrity for Public Procurement: 1.1 Employer as well as bidders, suppliers, contractors and consultants should observe the highest standard of ethics and should not indulge in the following prohibited practices, either directly or indirectly, at any stage during the procurement process or during execution of resultant contracts:

i) “Corrupt practice”: making offers, solicitation or acceptance of bribe, rewards or gifts or any material benefit, in exchange for an unfair advantage in the procurement process or to otherwise influence the procurement process or contract execution; ii) “Fraudulent practice”: any omission or misrepresentation that may mislead or attempt to mislead so that financial or other benefits may be obtained or an obligation avoided. This includes making false declaration or providing false information for participation in a tender process or to secure a contract or in execution of the contract; iii) “Anti-competitive practice”: any collusion, bid rigging or anti-competitive arrangement, or any other practice coming under the purview of The Competition Act, 2002, between two or more bidders, with or without the knowledge of the Employer, that may impair the transparency, fairness and the progress of the procurement process or to establish bid prices at artificial, non-competitive levels; iv) “Coercive practice”: harming or threatening to harm, persons or their property to influence their participation in the procurement process or affect the execution of a contract;

v) “Conflict of interest”: any personal, financial, or business relationship between the bidder and any personnel of the procuring entity who are directly or indirectly related to the procurement or execution process of the contract, which can affect the decision of the procuring entity directly or indirectly. vi) “Undue Advantage”: improper use of information obtained by the bidder from the procuring entity with an intent to gain an unfair advantage in the procurement process or for personal gain. This also includes if the bidder (or his allied firm) provided services for the need assessment/ procurement planning of the tender process in which it is participating; vii) “Obstructive practice”: materially impede the Employer’s investigation into allegations of one or more of the above mentioned prohibited practices either by deliberately destroying, falsifying, altering; or by concealing of evidence material to the investigation; or by making false statements to investigators and/or by threatening, harassing or intimidating any party to prevent it from disclosing its knowledge of matters relevant to the investigation or from pursuing the investigation; or by impeding the Employer’s rights of audit or access to information.

1.2 Obligations for Proactive Disclosures i) POWERGRID as well as bidders, suppliers, contractors and consultants, are obliged under Code of Integrity for Public Procurement to suo-moto proactively declare any conflicts of interest (coming under the definition mentioned above – pre-existing or as and as soon as these arise at any stage) in any procurement process or execution of contract. Failure to do so would amount to violation of this code of integrity; and ii) Any bidder must declare, whether asked or not in a bid document, any previous transgressions of such a code of integrity with any entity in any country during the last three years or of being debarred by any other procuring entity. Failure to do so would amount to violation of this code of integrity. iii) To encourage voluntary disclosures, such declarations would not mean automatic disqualification for the bidder making such declarations. The declared conflict of interest may be evaluated and mitigation steps, if possible, may be taken by POWERGRID. Similarly voluntary reporting of previous transgressions of Code of Integrity elsewhere may be evaluated and barring cases of various grades of debarment, an alert watch may be kept on the bidder’s actions in the tender and subsequent contract.

1.3 Punitive Provisions: Without prejudice to and in addition to the rights of POWERGRID to other penal provisions as per the Bidding Documents or Contract, if POWERGRID comes to a conclusion that a (prospective) bidder/supplier, directly or through an agent, has violated this code of integrity in competing for the contract or in executing a contract, POWERGRID may take appropriate measures including one or more of the following: i) if the bid(s) is under consideration in any procurement a) Forfeiture or encashment of Bid Security b) calling off of any pre-contract negotiations, and; c) rejection and exclusion of the bidder from the procurement process ii) if a contract has already been awarded a) Cancellation/termination of the contract in question; b) Forfeiture or encashment of Contract Performance Guarantee (CPG) of the contract in question; iii) Provisions in addition to above: a) Removal from the list of registered suppliers and banning/debarment of the bidder/contractor from participation in future procurements in line with POWERGRID’s policy for “Black-Listing of Firms / Banning of Business”. b) In case of anti-competitive practices, information for further processing may be filed with the Competition Commission of India; c) Initiation of suitable disciplinary or criminal proceedings against any individual or staff found responsible.

1.4 In pursuance to this policy, the Employer will have the right to require that the provision be included in Bidding Documents and in contracts, requiring Bidders, suppliers, and contractors and their sub-contractors to permit the Employer to inspect their accounts and records and other documents relating to bid submission and contract performance under this project only and to have them audited by auditors appointed by the Employer.

Further, we hereby confirm that incase of transgression of CIPP, we are aware that we may get delisted from Registered Suppliers / Contractors and POWERGRID may take other punitive actions such as Cancellation of Contracts, Banning and Blacklisting or action in Competition Commission of India etc.

We hereby confirm that we observe the highest standard of ethics and shall not indulge in the following prohibited practices, either directly or indirectly, at any stage during the procurement process or during execution of resultant contracts:

i) Corrupt Practice

ii) Fradulent Practice

iii) Anti-competitive Practice

iv) Coercive Practice

v) Conflict of Interest

vi) Obstructive Practice

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-14

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Declaration in regard to bid capacity)

Bidder’s Name and Address (Bidder) : To

Name: 0 Sr.GM(C&M)

Address: 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

In support of determining the balace bid capacity of the bidders as stipulated in the Qualification Requirements (QR) in Section-III of the Bidding Documents, we hereby declare the following details:

I) Details of the contracts awarded by SR-I, POWERGRID :

S No. Details of the contracts awarded by SR-I, POWERGRID in FY 2025-26 LOA/ PO reference number along with date of award

II) Details of the tenders floated by SR-I, POWERGRID, for which bidder has submitted their bid:

S No. Details of the tenders floated by SR-I, POWERGRID in FY 2025-26, for which bidder has submitted their bid: Tender reference number (RFx / Specification No.) & date of tender publication

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] ATTACHMENT-15

“Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

(Declaration by the Bidder for 'POWERGRID Whistle Blower and Fraud Prevention Policy')

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that we, along with our associate/ collaborators/ sub-contractors/ sub-vendors/consultants/ service providers shall strictly adhere to the 'POWERGRID Whistle Blower and Fraud Prevention Policy'.

We, along with our associate / collaborator / subcontractors / sub-vendors / consultants / service providers shall observe the highest standard of ethics and shall not indulge or allow anybody else working in our organization to indulge in fraudulent activities during execution of the contract and would immediately apprise the Employer about any fraud or suspected fraud as soon as it comes to their notice.

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

[Spec. No.: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)] Bid Form-1st Envelope

Bid Proposal Ref. No.

Power Grid Corporation of India Ltd.,

Southern Region -I Headquarters

Kavadiguda Main Road

Secunderabad - 500080 (Telangana)

Name of Contract : “Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

Dear Ladies and/or Gentlemen,

1.0 Having examined the Bidding Documents, including Amendments the receipt of which is hereby acknowledged, we the undersigned, offer to execute the work under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 3.2 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid consisting of Techno – Commercial Part & Price Parts.

2.0 Attachments to the Bid Form

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments:

(a) Attachment 1 Bid Security, in a separate envelope, for a sum of Rs. 1,27,000 (Rs. One Lac and Twenty Seven Thousand only) initially valid for a period of Seven (7) months from the date set for opening of bids.

(b) Attachment 2 A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 6.

(c) Attachment 3 Bidder’s Eligibility and Qualifications

(d) Attachment 4 The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein

(e) Attachment 5 Work Completion Schedule.

(f) Attachment 6 Information regarding ex-employees of Employer in Bidder’s firm.

(g) Attachment 7 Declaration regarding Social Accountability

(h) Attachment 8 Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(i) Attachment 9 Additional Information

(j) Attachment 10 Integrity Pact

(k) Attachment 11 Declaration

(l) Attachment 12 Safety Pact

(m) Attachment 13 Declaration for Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID.

(n) Attachment 14 Declaration in regard to bid capacity.

(o) Attachment 15 Declaration for 'POWERGRID Whistle Blower and Fraud Prevention Policy'.

(p) Attachment 21 Affidavit for self-certifictaion PPP-MII

(q) Attachment 23 Compliance to the process related to the e-RA

(r) Attachment 26 Certification by the Bidder per DoE Order

(s) Attachment 28 Hard Copy Declaration

3.0 We are aware that our bid is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in the bid documents.

3.2 We declare that as specified in Bidding Documents, the RATES of all the Goods to be supplied under this contract shall remain FIRM during the currency of the contract and no price adjustment shall be applicable..

4.0 We confirm that except as otherwise specifically provided our Bid Prices include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents

4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

5.0 Construction of the Contract

5.1 We declare that we have studied the mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us Single Contract covering all goods and related services.

6.0 We have read the various clauses and provisions in bid documents and confirm that all the specified stipulations are acceptable to us.

Further we understand that deviation taken in any of the above clauses by us shall make our bid non-responsive as per provision of bidding documents and rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification/Letter of Award to us, and to achieve the completion of works and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of Six (06) months from the date initially stipulated for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

(a) “Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS”

13.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.

15 Further, we hereby confirm that except as mentioned in the Attachment -4 (Deviations) hereof:

(i) there are no discrepencies/inconsistencies and deviations/omissions/reservations to the Bidding Documents,;

16 We also confirm that in case any discrepencies/inconsitencies and deviations/omissions/reservations, as referred to in para (i) and (ii) above, is observed, the same shall be deemed as withdrawn/rectified without any finacial implication, whatsoever to POWERGRID. However, in case of any artithmetical errors, the same shall be governed as per the provisions of ITB

We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS

Specification No: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499)

Enter the details of the bidder below:

Specify type of Bidder Sole Bidder

Name of the Bidder TRUE

Address of Registered Office TRUE

Mobile no. +91 TRUE

Printed Name TRUE

Designation TRUE

Place TRUE False

#REF! ATTACHMENT-10

Name : #REF! #REF!

Address : #REF! #REF!

Integrity Pact is annexed herewith this Volume.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between 0 #REF!

Power Grid Corporation of India Limited 0 #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

0 #REF! having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS

Schedule-I : DSR Scheduled Items

Bidder’s Name and Address (Sole Bidder) : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod, Secunderabad - 500080

All prices are in INR

Sl. No. DSR 2023 Ref No: Service Number SAC (Service Accounting Codes) Whether SAC in column ‘4’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘6’ is confirmed. If not indicate applicable rate of GST # Description (DSR'23 Items- Civil Works) Unit Quantity Unit Erection Charges as per DSR incl. GST Unit Erection Charges as per DSR excl. GST Unit Erection Charges incl. Escl.@3% excluding GST Quoted rates excl. GST (as per Quoted Percentage) GST % Amount as per DSR excluding GST GST Quoted Amount excluding GST GST

Part-I CIVIL SCHEDULE ITEMS

Part A : Repair of Transit Camp Boundary Wall

1 1.1.1 CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking upto 1 Km Lime, moorum , Building Rubbish cum 69.00 174.04 147.49 151.92 151.92 18.00% 10,482.48 1,886.85 10,482.48 1,886.85

2 1.1.2 CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking upto 1 Km Earth cum 129.00 217.55 184.36 189.90 189.90 18.00% 24,497.10 4,409.48 24,497.10 4,409.48

3 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. cum 269.00 260.30 220.59 227.21 227.21 18.00% 61,119.49 11,001.51 61,119.49 11,001.51

4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 141.00 196.00 166.10 171.08 171.08 18.00% 24,122.28 4,342.01 24,122.28 4,342.01

5 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) cum 16.00 6,812.00 5,772.88 5946.07 5,946.07 18.00% 95,137.12 17,124.68 95,137.12 17,124.68

6 4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) cum 7.00 9,895.20 8,385.76 8637.34 8,637.34 18.00% 60,461.38 10,883.05 60,461.38 10,883.05

7 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) cum 34.00 9,045.75 7,665.89 7895.87 7,895.87 18.00% 268,459.58 48,322.72 268,459.58 48,322.72

8 5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) cum 6.00 10,852.95 9,197.42 9473.34 9,473.34 18.00% 56,840.04 10,231.21 56,840.04 10,231.21

9 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete sqm 109.00 392.15 332.33 342.30 342.30 18.00% 37,310.70 6,715.93 37,310.70 6,715.93

10 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 87.00 927.25 785.81 809.38 809.38 18.00% 70,416.06 12,674.89 70,416.06 12,674.89

11 5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts sqm 172.00 961.30 814.66 839.10 839.10 18.00% 144,325.20 25,978.54 144,325.20 25,978.54

12 5.9.15 Centering and shuttering including strutting, propping etc. and removal of form for Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like sqm 36.00 392.15 332.33 342.30 342.30 18.00% 12,322.80 2,218.10 12,322.80 2,218.10

13 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. : Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 2962.00 107.85 91.40 94.14 94.14 18.00% 278,842.68 50,191.68 278,842.68 50,191.68

14 7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) cum 77.00 7,311.25 6,195.97 6381.85 6,381.85 18.00% 491,402.45 88,452.44 491,402.45 88,452.44

15 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. kg 1336.00 117.35 99.45 102.43 102.43 18.00% 136,846.48 24,632.37 136,846.48 24,632.37

16 12.41.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter mtr 124.00 248.80 210.85 217.17 217.17 18.00% 26,929.08 4,847.23 26,929.08 4,847.23

17 13.4.2 CEMENT PLASTER (IN COARSE SAND)12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) sqm 230.00 343.65 291.23 299.97 299.97 18.00% 68,993.10 12,418.76 68,993.10 12,418.76

18 13.5.2 CEMENT PLASTER (IN COARSE SAND) 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) sqm 143.00 395.35 335.04 345.09 345.09 18.00% 49,347.87 8,882.62 49,347.87 8,882.62

19 13.33.1 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled pointing sqm 91.00 385.40 326.61 336.41 336.41 18.00% 30,613.31 5,510.40 30,613.31 5,510.40

20 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 373.00 171.10 145.00 149.35 149.35 18.00% 55,707.55 10,027.36 55,707.55 10,027.36

21 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture sqm 80.00 226.25 191.74 197.49 197.49 18.00% 15,799.20 2,843.86 15,799.20 2,843.86

22 15.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge. : Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) cum 6.00 2,434.25 2,062.92 2124.81 2,124.81 18.00% 12,748.86 2,294.79 12,748.86 2,294.79

23 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar cum 53.00 2,060.20 1,745.93 1798.31 1,798.31 18.00% 95,310.43 17,155.88 95,310.43 17,155.88

24 15.9.2 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar cum 38.00 2,458.95 2,083.86 2146.37 2,146.37 18.00% 81,562.06 14,681.17 81,562.06 14,681.17

25 15.11.2 Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured): In cement mortar cum 26.00 689.20 584.07 601.59 601.59 18.00% 15,641.34 2,815.44 15,641.34 2,815.44

TOTAL : PART-A: Repair of Transit Camp Boundary Wall 2,225,238.64 400,542.96 2,225,238.64 400,542.96

Part B : Renovation of Transit Camp Building and Toilets

1 1.1.1 CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking upto 1 Km Lime, moorum , Building Rubbish cum 10.00 174.04 147.49 151.92 151.92 18.00% 1,519.20 273.46 1,519.20 273.46

2 1.1.2 CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking upto 1 Km Earth cum 19.00 217.55 184.36 189.90 189.90 18.00% 3,608.10 649.46 3,608.10 649.46

3 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. cum 19.00 260.30 220.59 227.21 227.21 18.00% 4,316.99 777.06 4,316.99 777.06

4 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) cum 19.00 7,294.70 6,181.95 6367.41 6,367.41 18.00% 120,980.79 21,776.54 120,980.79 21,776.54

5 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. sqm 61.00 749.30 635.00 654.05 654.05 18.00% 39,897.05 7,181.47 39,897.05 7,181.47

6 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red : Area of slab upto 0.50 sqm sqm 4.00 5,413.50 4,587.71 4725.34 4,725.34 18.00% 18,901.36 3,402.24 18,901.36 3,402.24

7 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red : Area of slab over 0.50 sqm sqm 5.00 5,136.30 4,352.80 4483.38 4,483.38 18.00% 22,416.90 4,035.04 22,416.90 4,035.04

8 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work mtr 17.00 510.95 433.01 446.00 446.00 18.00% 7,582.00 1,364.76 7,582.00 1,364.76

9 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each 9.00 978.70 829.41 854.29 854.29 18.00% 7,688.61 1,383.95 7,688.61 1,383.95

10 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). cum 0.70 142,949.70 121,143.81 124778.13 124,778.13 18.00% 87,344.69 15,722.04 87,344.69 15,722.04

11 9.12 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). sqm 1.00 176.40 149.49 153.98 153.98 18.00% 153.98 27.72 153.98 27.72

12 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 3.00 3,473.85 2,943.94 3032.26 3,032.26 18.00% 9,096.78 1,637.42 9,096.78 1,637.42

13 9.53 Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). each 96.00 228.85 193.94 199.76 199.76 18.00% 19,176.96 3,451.85 19,176.96 3,451.85

14 9.71.2 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 100x60x2.50 mm each 96.00 106.35 90.13 92.83 92.83 18.00% 8,911.68 1,604.10 8,911.68 1,604.10

15 9.97.3 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm each 29.00 99.70 84.49 87.03 87.03 18.00% 2,523.87 454.30 2,523.87 454.30

16 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm each 12.00 66.25 56.14 57.83 57.83 18.00% 693.96 124.91 693.96 124.91

17 9.101.1 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper each 23.00 39.60 33.56 34.57 34.57 18.00% 795.11 143.12 795.11 143.12

18 9.147.C2.1 Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute , to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds : Fixed window / ventilator with mullion / transom. :Using R1 series with frame (33 mm & above ) (35 mm & above) & mullion (33 mm & above) (50 mm & above). (Height upto 0.90 metre) sqm 2.00 9,155.20 7,758.64 7991.40 7,991.40 18.00% 15,982.80 2,876.90 15,982.80 2,876.90

19 9.7.7.1 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm) sqm 2.00 2,241.80 1,899.83 1956.83 1,956.83 18.00% 3,913.66 704.46 3,913.66 704.46

20 11.41A.1.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size of Tile 600 x 600 mm sqm 10.00 1,453.65 1,231.91 1268.86 1,268.86 18.00% 12,688.60 2,283.95 12,688.60 2,283.95

21 11.41A.2.5 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. : Glazed vitrified floor tiles polished finish of size : Size of Tile 1200 x 1200 mm sqm 84.00 2,541.00 2,153.39 2217.99 2,217.99 18.00% 186,311.16 33,536.01 186,311.16 33,536.01

22 11.41A.3.2 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. : Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 1200 mm sqm 39.00 1,797.30 1,523.14 1568.83 1,568.83 18.00% 61,184.37 11,013.19 61,184.37 11,013.19

23 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter mtr 5.00 377.40 319.83 329.43 329.43 18.00% 1,647.15 296.49 1,647.15 296.49

24 12.42.1.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm each 2.00 136.15 115.38 118.84 118.84 18.00% 237.68 42.78 237.68 42.78

25 12.42.3.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm each 2.00 234.15 198.43 204.39 204.39 18.00% 408.78 73.58 408.78 73.58

26 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend each 2.00 150.35 127.42 131.24 131.24 18.00% 262.48 47.25 262.48 47.25

27 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe each 2.00 131.85 111.74 115.09 115.09 18.00% 230.18 41.43 230.18 41.43

28 13.4.2 CEMENT PLASTER (IN COARSE SAND)12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) sqm 57.00 343.65 291.23 299.97 299.97 18.00% 17,098.29 3,077.69 17,098.29 3,077.69

29 13.5.2 CEMENT PLASTER (IN COARSE SAND) 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) sqm 50.00 395.35 335.04 345.09 345.09 18.00% 17,254.50 3,105.81 17,254.50 3,105.81

30 13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. sqm 68.00 537.45 455.47 469.13 469.13 18.00% 31,900.84 5,742.15 31,900.84 5,742.15

31 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. per bag 50 kg cement 20.00 22.10 18.73 19.29 19.29 18.00% 385.80 69.44 385.80 69.44

32 13.68.1 French spirit polishing : Two or more coats on new works including a coat of wood filler sqm 21.00 446.25 378.18 389.52 389.52 18.00% 8,179.92 1,472.39 8,179.92 1,472.39

33 13.85.3 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 1595.00 73.95 62.67 64.55 64.55 18.00% 102,957.25 18,532.31 102,957.25 18,532.31

34 13.8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 100.00 156.05 132.25 136.21 136.21 18.00% 13,621.00 2,451.78 13,621.00 2,451.78

35 13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. sqm 864.00 142.80 121.02 124.65 124.65 18.00% 107,697.60 19,385.57 107,697.60 19,385.57

36 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. sqm 1595.00 25.15 21.31 21.95 21.95 18.00% 35,010.25 6,301.85 35,010.25 6,301.85

37 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work sqm 21.00 102.80 87.12 89.73 89.73 18.00% 1,884.33 339.18 1,884.33 339.18

38 13.112.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface sqm 731.00 131.30 111.27 114.61 114.61 18.00% 83,779.91 15,080.38 83,779.91 15,080.38

39 14.79 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. each 2.00 433.75 367.58 378.61 378.61 18.00% 757.22 136.30 757.22 136.30

40 15.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge. : Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) cum 6.00 2,434.25 2,062.92 2124.81 2,124.81 18.00% 12,748.86 2,294.79 12,748.86 2,294.79

41 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar cum 2.00 2,060.20 1,745.93 1798.31 1,798.31 18.00% 3,596.62 647.39 3,596.62 647.39

42 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 130.00 54.65 46.31 47.70 47.70 18.00% 6,201.00 1,116.18 6,201.00 1,116.18

43 16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. sqm 47.00 972.00 823.73 848.44 848.44 18.00% 39,876.68 7,177.80 39,876.68 7,177.80

44 16.82 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. mtr 80.00 39.35 33.35 34.35 34.35 18.00% 2,748.00 494.64 2,748.00 494.64

45 16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. sqm 232.00 131.75 111.65 115.00 115.00 18.00% 26,680.00 4,802.40 26,680.00 4,802.40

46 16.84 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the department free of cost). sqm 186.00 402.95 341.48 351.73 351.73 18.00% 65,421.78 11,775.92 65,421.78 11,775.92

47 16.85 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost) mtr 80.00 109.45 92.75 95.54 95.54 18.00% 7,643.20 1,375.78 7,643.20 1,375.78

48 17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board : 510x1040 mm bowl depth 250 mm each 1.00 6,945.60 5,886.10 6062.68 6,062.68 18.00% 6,062.68 1,091.28 6,062.68 1,091.28

49 17.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia each 1.00 119.55 101.31 104.35 104.35 18.00% 104.35 18.78 104.35 18.78

50 18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work - Exposed on wall 25 mm nominal dia Pipes mtr 5.00 401.55 340.30 350.51 350.51 18.00% 1,752.55 315.46 1,752.55 315.46

51 18.7.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work - Exposed on wall 32 mm nominal dia Pipes mtr 35.00 518.75 439.62 452.81 452.81 18.00% 15,848.35 2,852.70 15,848.35 2,852.70

52 18.7.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work - Exposed on wall 40 mm nominal dia Pipes mtr 65.00 702.95 595.72 613.59 613.59 18.00% 39,883.35 7,179.00 39,883.35 7,179.00

53 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes mtr 5.00 497.80 421.86 434.52 434.52 18.00% 2,172.60 391.07 2,172.60 391.07

54 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes mtr 20.00 537.60 455.59 469.26 469.26 18.00% 9,385.20 1,689.34 9,385.20 1,689.34

55 18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia Pipes mtr 5.00 739.30 626.53 645.32 645.32 18.00% 3,226.60 580.79 3,226.60 580.79

56 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work : 32 mm nominal dia Pipes mtr 5.00 438.60 371.69 382.85 382.85 18.00% 1,914.25 344.57 1,914.25 344.57

57 18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work : 40 mm nominal dia Pipes mtr 20.00 563.05 477.16 491.48 491.48 18.00% 9,829.60 1,769.33 9,829.60 1,769.33

58 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ltr 4000.00 11.00 9.32 9.60 9.60 18.00% 38,400.00 6,912.00 38,400.00 6,912.00

59 18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. each 15.00 74.80 63.39 65.29 65.29 18.00% 979.35 176.28 979.35 176.28

60 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion : Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 70.00 530.90 449.92 463.41 463.41 18.00% 32,438.70 5,838.97 32,438.70 5,838.97

61 21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 70.00 634.45 537.67 553.80 553.80 18.00% 38,766.00 6,977.88 38,766.00 6,977.88

62 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm 50.00 1,176.80 997.29 1027.21 1,027.21 18.00% 51,360.50 9,244.89 51,360.50 9,244.89

63 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 16.00 1,684.60 1,427.63 1470.46 1,470.46 18.00% 23,527.36 4,234.92 23,527.36 4,234.92

TOTAL :Part B : Renovation of Transit Camp Building and Toilets 1,499,569.38 269,922.49 1,499,569.38 269,922.49

DSR 2025 Ref No: Part C - Development of Lawn

1 2.1 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). cum 199.00 119.00 100.85 100.85 18.00% 20,069.1500 3,612.45 20,069.15 3,612.45

2 2.4.1 Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm Cum 40.00 391.35 331.65 331.65 18.00% 13,266.0000 2,387.88 13,266.00 2,387.88

3 2.6 Uprooting weeds from the trenched area after 10 to 15 days of its floodingwith water including disposal of uprooted vegetation. sqm 1324.00 7.45 6.31 6.31 18.00% 8,354.4400 1,503.80 8,354.44 1,503.80

5 2.8 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). Cum 199.00 79.70 67.54 67.54 18.00% 13,440.4600 2,419.28 13,440.46 2,419.28

6 2.9 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge Cum 199.00 55.70 47.20 47.20 18.00% 9,392.8000 1,690.70 9,392.80 1,690.70

7 2.27 Supplying and spreading of sand in lawn area, including watering, and dressing complete. Cum 40.00 2,088.90 1,770.25 1,770.25 18.00% 70,810.0000 12,745.80 70,810.00 12,745.80

8 2.33 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. Per sqm 1324.00 257.00 217.80 217.80 18.00% 288,367.2000 51,906.10 288,367.20 51,906.10

TOTAL : Part C - Development of Lawn 429,989.05 77,398.03 429,989.05 77,398.03

SCHEDULE ITEMS (Electrical Portion)

Part D - Renovation of Electrical Wiring and fittings

1 1.10.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch,modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A point 30.00 1,189.00 1,007.63 1,007.63 18.00% 30,228.9000 5,441.2020 30,228.90 5,441.20

2 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. point 19.00 1,803.00 1,527.97 1,527.97 18.00% 29,031.4300 5,225.6574 29,031.43 5,225.66

3 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. Meter 150.00 373.00 316.10 316.10 18.00% 47,415.0000 8,534.7000 47,415.00 8,534.70

4 1.14.1 Wiring for circuit/ submain wiring along with earth wire With the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 50.00 267.00 226.27 226.27 18.00% 11,313.5000 2,036.4300 11,313.50 2,036.43

5 1.14.2 Wiring for circuit/ submain wiring along with earth wire With the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 75.00 311.00 263.56 263.56 18.00% 19,767.0000 3,558.0600 19,767.00 3,558.06

6 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 200.00 54.00 45.76 45.76 18.00% 9,152.0000 1,647.3600 9,152.00 1,647.36

7 1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch each 49.00 121.00 102.54 102.54 18.00% 5,024.4600 904.4028 5,024.46 904.40

8 1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch each 9.00 176.00 149.15 149.15 18.00% 1,342.3500 241.6230 1,342.35 241.62

9 1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet each 49.00 136.00 115.25 115.25 18.00% 5,647.2500 1,016.5050 5,647.25 1,016.51

10 1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet each 16.00 219.00 185.59 185.59 18.00% 2,969.4400 534.4992 2,969.44 534.50

11 1.24.7 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet each 7.00 168.00 142.37 142.37 18.00% 996.5900 179.3862 996.59 179.39

12 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. each 10.00 402.00 340.68 340.68 18.00% 3,406.8000 613.2240 3,406.80 613.22

13 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. each 11.00 47.00 39.83 39.83 18.00% 438.1300 78.8634 438.13 78.86

14 1.27.1 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) each 12.00 354.00 300.00 300.00 18.00% 3,600.0000 648.0000 3,600.00 648.00

15 1.27.2 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) each 10.00 384.00 325.42 325.42 18.00% 3,254.2000 585.7560 3,254.20 585.76

16 1.27.4 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm) each 11.00 462.00 391.53 391.53 18.00% 4,306.8300 775.2294 4,306.83 775.23

17 1.27.5 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm) each 7.00 517.00 438.14 438.14 18.00% 3,066.9800 552.0564 3,066.98 552.06

18 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. each 4.00 112.00 94.92 94.92 18.00% 379.6800 68.3424 379.68 68.34

19 1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C each 3.00 994.00 842.37 842.37 18.00% 2,527.1100 454.8798 2,527.11 454.88

20 2.10.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole each 5.00 285.00 241.53 241.53 18.00% 1,207.6500 217.3770 1,207.65 217.38

TOTAL : Part D - Renovation of Electrical Wiring and fittings 185,075.30 33,313.55 185,075.30 33,313.55

Total of Scheduled Items- Civil + Electrical (Schedule-I) 4,339,872.37 781,177.03 4,339,872.37 781,177.03

Percentage (%) above/below +/- on DSR 2023 Rates excluding GST mentioned above (to be quoted by Bidder) 0.00%

Total of Schedule I excluding GST considering offered % age 4,339,872.37

Total GST 781,177.03

GRAND TOTAL incl. GST 5,121,049.40

As the %variation w.r.t total DSR Amount cell left Blank the bid is considered as Non-responsive

Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS

Schedule-II : Non-Scheduled Items

Bidder’s Name 0 To:

Address : 0 Contract Services

0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

Kavadiguda Main Raod, Secunderabad - 500080

Sl. No. Service Number SAC Code Whether SAC in column ‘2’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘6’ is confirmed. If not indicate applicable rate of GST # Description (Non Schedule Items) Unit Quantity Unit Rate without GST Total Amount excl. GST GST Remarks 66

A NON-SCHEDULE ITEMS: CIVIL

A Part A : Repair of Transit Camp Boundary Wall

NS_1 18% Random rubble masonry with hard stone (old stone) in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (Stone supply under the scope of POWERGRID) cum 38.00 0.00 0.00 Included in other item

NS_2 18% Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Note: Fly ash brick of same class confirming to relevant IS code can also be used if clay bricks of designated class are not available. cum 18.00 0.00 0.00 Included in other item

NS_3 18% Supplying, filling, spreading & leveling gravels of size range 20 mm to 50 mm, , in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. cum 5.00 0.00 0.00 Included in other item

TOTAL : Part A : Repair of Transit Camp Boundary Wall 0.00 0.00

B Part B - Renovation of Transit Camp Building and Toilets

NS 4 18% Providing & fixing chicken wire mesh 24 gauge at junctions of RCC and masonry walls including fixing in position, scaffolding etc. complete as directed by Engineer-in-charge. sqm 50.00 0.00 0.00 Included in other item

NS 5 18% Providing and laying Vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser and dado laid on 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 1200 mm sqm 121.00 0.00 0.00 Included in other item

NS 6 18% Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 1200x1200 mm sqm 7.00 0.00 0.00 Included in other item

NS 7 18% Grouting the joints of floor or wall tiles (upto any height) of any size having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. sqm 249.00 0.00 0.00 Included in other item

NS 8 18% Dismantling of doors, windows and clerestory windows of steel, wood, aluminium, UPVC or WPC shutters, including chowkhats/frames, architraves, holdfasts and all other fittings, complete. The dismantled material shall be carefully removed, handed over, and stacked in good condition without any damage at a location decided by the Engineer-in-Charge within a lead of 1 km. For area up to 3.00 sq. metres. Note: The rate includes all leads, lifts, labour, tools, and transportation charges. each 31.00 0.00 0.00 Included in other item

NS 9 18% Providing and fixing factory-made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory window frames (Chowkhat), manufactured from virgin PVC polymer, calcium carbonate, and natural fibres (wood powder/rice husk/wheat husk) with non-toxic additives. The frames shall be fabricated with mitred joints, fixed using PVC solvent cement and fully threaded stainless-steel star-headed screws. The material shall be resistant to the spread of flame and shall be termite/borer proof, water and moisture proof, and fire retardant. Frames shall be fixed in position using MS hold-fasts/lugs or stainless-steel dash fasteners of required diameter and length, complete in all respects, as per the directions of the Engineer-in-Charge. Frame size: 65 × 100 mm (Dimension Tolerance of minus 5 mm shall be acceptable) (Note : No extra payment will be made for MS hold-fasts/lugs or stainless steel dash fastener) Make: Qute / HDHMR Doors – NCL / Ecoste / Ecocell / Greenpanel / DEC Industries / Jamex, or equivalent as per specification. mtr 35.00 0.00 0.00 Included in other item

NS 10 18% Providing and fixing factory made minimum 28 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size and design/pattern comprising of virgin polymer, calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives and resistance to spread of flame of with property of being termite/borer proof, water/moisture proof and fire retardant of approved brand and fixing with stainless steel butt hinges 4 nos of size 100x58x1.9 mm with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Make-Qute/HDHMR Doors-NCL/Ecoste/Ecocell/Greenpannel/DEC Industries/Jamex or equivalant specification. sqm 12.00 0.00 0.00 Included in other item

NS 11 18% Providing and fixing decorative high-pressure laminated sheet of plain or wood-grain pattern, in gloss, matt or suede finish, 1.0 mm thick, of approved brand as approved by the Engineer-in-Charge, having a high-density protective surface layer and a reverse side suitable for adhesive bonding, conforming to IS: 2046 (Type-S), fixed on existing shutters. The item includes removal of the existing laminate from the shutter, cleaning and preparation of the surface prior to fixing the new laminate, cost of approved quality adhesive, removal and refixing of fittings from existing shutters wherever required, and disposal of removed materials within a lead of 1 km, complete as per the directions of the Engineer-in-Charge. The rate also includes taking out the shutter from the frame, carrying out minor repairs to frames such as filling holes with approved fillers, cutting, chiselling or grinding to make the shutter true to size, and refixing the shutter in position after completion of the work, wherever required. Note: Butt hinges and necessary screws shall be paid for separately. sqm 66.00 0.00 0.00 Included in other item

NS 12 18% Dismantling tile work in floors and Walls above plinth level to floor V level laid in cement mortar including removal of mortar and filled sand from floor or wall surface and stacking material within 1 KM metres lead. For thickness of tiles 10 mm to 25 mm sqm 253.00 0.00 0.00 Included in other item

NS 13 18% Demolishing Granite slab or wall linning of any thickness and including removal of Cement mortar from surface upto any height manually /by mechanical means including disposal of same upto 1 KM radius as per direction of Engineer - in- charge. sqm 17.00 0.00 0.00 Included in other item

NS 14 18% ACP CLADDING WORK : Supplying , fixing and installation of ACP work upto any height with alloy aluminium sections of 50 mm x 25 mm x 1.0 mm (Reputed brand manufactured) for frame of work with necessary self Threaded Screws. Aluminium Composite Panel cladding in Pan Shape of approved shades (any colour or design) made out of 4 mm thick Aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwitched between aluminium sheets.The aluminium composite panel sheet shall be coil coated with KYNAR 500 Based PVDF.using screws cleat angles and Gaps filled with necessary whether silicon sealant and backer rods,including all necessary arrangements required for completion of work etc. sqm 13.00 0.00 0.00 Included in other item

NS 15 18% Providing, fixing and making Stainless steel letters in any language/design/logo with stainless steel ( Grade 304) sheet of minimum thickness 0.5 mm in plain or any colour as per requirement, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the letters in Granite cladding, ACP Cladding etc upto any height by drilling hole of required size with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., as per approval of Engineer-incharge, (for payment purpose weight of stainless steel members and fixing accessories such as nuts, bolts, fasteners etc. will be taken). (Dimension of Letters will be as per approved drawing and will be in standard dimension ratio). kg 50.00 0.00 0.00 Included in other item

NS 16 18% Dismantling or demolishing of all kinds of sanitary and bathroom fittings, water supply pipelines (up to any diameter, either GI or CPVC), sewerage and drainage pipelines and fittings (up to any diameter, of all types), and all other accessories excluding tile work and concrete work, complete as directed by the Engineer-in-Charge. The item includes dismantling of WCs along with flush tanks, health faucets, paper holders, two-way bibcocks, wash basins with pillar cocks and bottle traps of any size or shape, mirrors of any shape and size, bibcocks of any type, shower mixers of any type, overhead showers with arm, hand showers with all attachments, towel rings, towel holders, robe hooks, nahani traps, and all other sanitary fittings (European or Indian type).It also includes dismantling of water supply, sewerage, and drainage pipelines, either concealed or exposed on walls, in attached or separate toilet-cum-bathroom units, complete as directed by the Engineer-in-Charge. All dismantled fittings and accessories shall be carefully removed, handed over in good condition, and placed at a location decided by the Engineer-in-Charge within a radius of 1 km. The rate shall include all labour, tools, lead, lift, loading, unloading, transportation, and all incidentals, complete.Note: For measurement purposes, only the number of toilet-cum-bathroom units (attached or separate) shall be counted. each 5.00 0.00 0.00 Included in other item

NS 17 18% Sunken filling with 40 mm dia pipe spout:Providing and placing cinder/brick bat or any light weight water absorbing materials filling to the sunk floors in toilets/kitchen sunks, well compacted carefully by hand beating to required slopes including consolidation,making hole or core to the beam/wall for providing 40mm dia PVC drain (spout pipe) pipe of required length, pipe should be fixed properly to the beam or wall by core cutting or mannual which suitable for pipe with water proofing compound with cover the inlet pipe mouth with SS jali and packing with 40/20/10 mm stone aggregate with sufficent quantity. For toilet and Kitchen sunkun portions. cum 7.00 0.00 0.00 Included in other item

NS 18 18% 1) Cleaning and preparation of surface with the help of wire brush or grinder. Wash the roof with clean water pressure jet. Remove all loose concrete, grease, oil using wire brush, and scrubber. Undulation in RCC roof slab surface, honeycombs, pin hones, imperfections should be chiselled shall be repaired with Polymer Modified Mortar mixed by adding 1 kg Dr. Fixit Pidicrete URP, 5 kg fresh cement, and 15 kg graded sand. (i.e., in the ratio of 1:5:15) or with dual shrinkage compensated Dr. Fixit Polymer Modified Mortar HB. Etc., complete. All pipes to be placed / inserted in the core cut areas, apply a coat of Dr. Fixit Pidicrete Epoxy bonding agent over this, sprinkling fine sand / quartz sand and fill the gap with shrinkage compensating Dr. Fixit Polymer modified mortar HB / non-shrink grout. 2) The concrete surface must be brought into surface saturated dry condition (SSD). Providing & Applying 2 or more coats of high performance two component prepacked cementitious waterproofing, Dr. Fixit Pidifin 2K, with a mix ratio of (liquid: Powder), parts by wt. - 1:2 at the rate 0. 55 - 0.58 Sq.mt / Kg for 2 coats to achieve the DFT of 1mm in a span of 4 - 6 hours with a roller / brush on the prepared concrete substrate. Over the splash zone / shower wall taking the coating up the full height and up to 1 meter height on vertical surface and on other walls and 0.3 metre on horizontal surface below threshold for complete bathroom waterproofing. All the coats to be applied in perpendicular direction to each other. Allow the coating to air cure for 3-5 days before conducting water ponding test for 24 Hrs. Note:- Necessary grouting by injection through pressure gun or motor by cement and waterproffing chemical for aresting of leakage/sepage shall be included. Make:- Pidilite/Fosroc. sqm 83.00 0.00 0.00 Included in other item

0.00 0.00 Included in other item

NS 19 18% Screed concrete at desired locations - sunken/covering lan / electrical trenches : Sunken borrom or bottom of tiles in sunken/trenches covering required length of raceways / conduits and junction boxes in floor with baby/20mm concrete chips (1:2:4 grade) with pcc bed laid over and compacted. The thickness of the screed to be approx. Of 2'' to 3'' depend on the site conditions. The surface to be wavefree & prepared for laying vinyl flooring / carpet/sunken slope as approved. The vendor to consider labor curing the screeding surface till the surface is ready for laying vinyl flooring / carpet/sunken sloping. sqm 21.00 0.00 0.00 Included in other item

NS 20 18% Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 110mm outer dia. mtr 44.00 0.00 0.00 Included in other item

NS 21 18% Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 75mm outer dia. mtr 55.00 0.00 0.00 Included in other item

NS 22 18% Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line or AC drainage line including necessary fittings such as couplers, bends, tees, cross tees,reducer, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 40mm outer dia. mtr 10.00 0.00 0.00 Included in other item

NS 23 18% Providing, fixing, testing and commissioning uPVC SWR self cleaning Nahani trap, plain floor trap/ Multi floor trap etc. confirming to IS-14735 of 110 mm dia inlet and 75 mm outlet nominal dia. including fixing PVC reducer of 110mm dia. to 75 mm dia. and jointing with adhessive solvent cement including cost of cutting and making good the walls and floors at all levels etc. complete. each 6.00 0.00 0.00 Included in other item

NS 24 18% Providing and fixing stainless steel 304 grade mesh of average width of aperture 1.4 mm and nominal dia of wire 0.50 mm to uPVC / aluminium doors, windows, ventilator shutters, and partitions with suitable beading/clips either in new work or in existing ( including taking out and refixing of the uPVC / aluminium doors, windows, ventilator shutters, or partitions, either fully or partially as required) as per drawings and as directed by engineer in charge. The uPVC/aluminium section of windows shall be measured under relevant items. Actual area of mesh provided shall be measured for payment. sqm 31.00 0.00 0.00 Included in other item

NS 25 18% Providing and fixing CPVC Ball Valve 32 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. each 5.00 0.00 0.00 Included in other item

NS 26 18% Providing and fixing CPVC Ball Valve 40 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. each 3.00 0.00 0.00 Included in other item

NS 27 18% Providing and fixing EPDM rubber / neoprene gasket all around the glazed area of existing uPVC / aluminium doors, windows, ventilator shutters, and partitions, including taking out and refixing of the uPVC / aluminium doors, windows, ventilator shutters, or partitions, either fully or partially as required, after removing the old rubber gasket and fixing the new gasket complete, as per the directions of the Engineer-in-Charge. (Measurement of glazed area only shall be considered for payment). sqm 66.00 0.00 0.00 Included in other item

NS 28 18% Mortise Door Lock : Providing and fixing Premium Quality 8 inch Mortise Door Lockset having 70 mm Both Side Key Cylinder, both side handles with Silver Chrome Finish and both side key operation made with Aluminium and polished having dimensions 13.1 x 4.7 x 16 Centimeters and all other fittings and fixtures complete including cutting and making good in door and chaukhat or whereever required as per approved quality and as per manufacturer specification and direction of Engineer in Charge. Dorset Kaira 8 inch Mortise Door Lockset Model No : HLKAI06SC or Equivalent. each 6.00 0.00 0.00 Included in other item

NS 29 18% Cylindrical Door Lock : Providing and fixing Premium Quality Cylindrical Door Lock – 60 mm Backset made from stainless Steel Grade 304 Cover with 3 brass Keys, Durable & Rust Resistant Door Lock Operated With Key From Outside,in Silver Colour and round shape , having knob on both side made of stainless steel and polished and all other fittings and fixtures complete including cutting and making good in door and chaukhat or whereever required as per approved quality and as per manufacturer specification and direction of Engineer in Charge. Dorset Cylindrical Door Lock – 60 mm Backset, Stainless Steel, Left/Right STYLE : ETTOSS or Equivalent. each 18.00 0.00 0.00 Included in other item

NS 30 18% Exhaust Fan : Supply , Installation testing and comissioning of 200 mm Exhaust Fan of high velocity of 32 watts, having air flow capacity 520 Cubic Centimeters Per Minute with speed 1350 RPM, rust proof body and blades duly receted in an approved manner and marking (Similar to Havells Ventil Air DX 200 mm : Model No : FHVVEDXOWH08 each 6.00 0.00 0.00 Included in other item

Sanitary Fittings and Bathroom Accessories 0.00 0.00 Included in other item

NS 31 18% Wall Mixer:-Providing and fixing premium quality C.P. brass wall mixer with provision of both hand shower and overhead shower complete with 115 mm long bend pipe on upper side, connecting legs & wall flanges, and all other fittings and fixtures complete all chrome finish including cuttings and making good the walls and floor wherever required as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :FUS-CHR-29281 or equivalant. each 5.00 0.00 0.00 Included in other item

NS 32 18% Shower Head with Arm:-Providing and fixing premium quality C.P. brass overhead shower 200 dia round shape single flow with shower arm 400 mm long chrome finish and all other fittings and fixtures complete all chrome finish including cuttings and making good the walls and floor wherever required as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :SHA-CHR-455L400 + OHS-CHR-1613 or equivalant. each 5.00 0.00 0.00 Included in other item

NS 33 18% Hand shower with flexible metal pipe:-Providing and fixing premium quality C.P. brass hand shower 105 mm dia round shape single flow with air effect (ABS body & Face plate chrome plated) with rubit cleaning system with flexible tube 12 mm dia & 1.5 meter long with nuts with hand shower,with wall bracket for hand shower and all other fittings and fixtures complete all chrome finish including cuttings and making good the walls and floor wherever required as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : HSH-CHR-1715 + SHA-CHR-549D12 + SHA-CHR-555 or equivalant. each 4.00 0.00 0.00 Included in other item

NS 34 18% Table Top Wash Basin:-Providing and fixing premium quality over-counter thin rim table top wash basin of any shape minimum size 500X380X120 mm including Pillar cock Faucet with Click Clack Waste coupling, over flow hole, standard C.P. bottel trap, union, Long Braided Hose and all chrome finish and making necessary holes for fixing of pillar coack with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :JDS-WHT-25937 + ALD-CHR-729 + ALD-CHR-769L300X190 + FUS-CHR-29001 + ALD-CHR-803AB or equivalant. each 5.00 0.00 0.00 Included in other item

NS 35 18% Floor Mounted WC:-Providing and fixing premium quality white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white ceramic combined flushing cistern (single unit), with all fittings and fixtures complete including cutting and making good the walls and floors wherever required as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : Single Piece WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting- LYS-WHT-38851S220UFSM or equivalant. each 5.00 0.00 0.00 Included in other item

NS 36 18% 2-way bib cock:-Providing and fixing premium quality chrome finish of Two way bib cock with wall flange complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Jaquar model 2-way bib cock FUS-CHR-29041 or Equivalent. each 5.00 0.00 0.00 Included in other item

NS 37 18% Health Fucet:-Providing and fixing premium quality C.P. health Faucet of approved quality and make of the required length of flexible pipe upto the angle cock/two way bib cock, clamp to hold the same, fixing on the wall / Glazed tiles with S.S screws etc complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : ALD-CHR-573 or equivalant each 5.00 0.00 0.00 Included in other item

NS 38 18% Angle Valve:-Providing and fixing premium quality C.P. brass angle valve with cover plate for WCs, Wash basin, health Faucet etc as per approved quality 15 mm nominal bore & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : FUS-CHR-29053 or equivalant each 15.00 0.00 0.00 Included in other item

NS 39 18% Paper Holder:-Providing and fixing premium quality C.P. Toilet Paper Holder of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model: AKP-CHR-35753PS or equivalent. each 5.00 0.00 0.00 Included in other item

NS 40 18% Towel Ring:-Providing and fixing premium quality C.P. Towel ring square with round flange of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model : ACN-CHR-1121N or equivalent. each 6.00 0.00 0.00 Included in other item

NS 41 18% Coat Hook:-Providing and fixing premium quality CP Brass coat hook of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-35761P or equivalant. each 5.00 0.00 0.00 Included in other item

NS 42 18% Towel Rack:-Providing and fixing premium quality C.P. towel Rack of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model : AHS-CHR-1581H or equivalent. each 4.00 0.00 0.00 Included in other item

NS 43 18% Tumbler Holder:-Providing and fixing premium quality CP Brass Tumbler holder of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-CHR-35741P or equivalant. each 4.00 0.00 0.00 Included in other item

NS 44 18% Soap Dispenser:-Providing and fixing premium quality CP Brass Soap dispenser with glass bottle of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-35735P or equivalant. each 4.00 0.00 0.00 Included in other item

NS 45 18% Shower basket small:-Providing and fixing premium quality CP Brass shower basket small chrome finish of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :ACN-CHR-1177N or equivalant. Each 4.00 0.00 0.00 Included in other item

NS 46 18% Stop Cock with fittings:-Providing and fixing premium quality CP Brass concelead stop coack chrome finish with fitting sleeve, operating lever & adjustable wall flange with seal with Concealed Body of Flush Cock Suitable for 25mm Pipe Line with Protection Cap of standard shape as approved quality with all fittings and fixtures complete including cutting and making good the walls complete to in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :FUS-CHR-29083K + ALD-081 or equivalant. each 5.00 0.00 0.00 Included in other item

NS 47 18% SS jali for nahani for toilet with cockrage trap:-Providing and fixing 5 inch X 5Inch stainless (SS304) matt finsh steel jali (grating) with or without hole consisting four piece system with Cockroach Trap, and frame thickness 1mm & grating thickness 1.5 mm for waste pipe of floor or Nahani trap complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Nirali/Lipka/ Viking/Roca/Jaquar/Kohler or equivalent. each 12.00 0.00 0.00 Included in other item

NS 48 18% Dustbin:- Providing and fixing Stainless steel Step can in 6L of size 31.5 × 21 × 21 cm with Solid Metal Construction for Durability and Reliability,finishes resist corrosion and tarnishing, exceeding industry durability standards over two times,Premium metal construction for durability and reliability and all other fittings and fixtures complete as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. KOHLER Model No-K-17531T-ST Eolia Step can in 6L, in stainless steel or Equivalent. each 5.00 0.00 0.00 Included in other item

NS 49 18% Flash touch-free infrared hand dryer:- Providing and fixing Bolt touch-free infrared hand dryer with 1150W rated power & carbon brush motor of size 153X162X280 mm with 1150W rated power , 304 stainless steel shell, Metal housing, durable and environmentally friendly,Compact size, strong airflow and low noise,Dynamic display of power indicator, and all completetd with fitting and fixtures & as per manufacturers specification and direction of Engineer-in-charge. Jaquar Model No-HDR-SSF-AK2807- Flash touch-free infrared hand dryer with 1150W rated power & carbon brush motor or Equivalent. each 1.00 0.00 0.00 Included in other item

NS 50 18% Autometic Soap dispenser :- Providing and fixing autometic soap dispenser of size 265 x 118 x 110 mm with 0.8 Litre capacity of Quantity dispensed per pulsation 1.0 – 2.0ml with Thermoplastic ABS body with a 0.5 mm aluminum frame, in shiny silver and black. Elastomeric valve. Polyethylene soap deposit with a 0.8L capacity,Control circuit with infrared detectors that activate the soap dispenser on nearing the hands, powered by 6 pcs of Alkaline AA (1.5V) or 1 pcs of Alkaline (9V) battery, Adjustable triggering distance,Transparent plastic content viewer (polycarbonate) on the front, Security lock, All surfaces are flat, therefore easy to clean inside and out, Allows for 150,000 cycles of use, Suitable soaps: Liquid hand soaps, with neutral PH, not containing chlorine,Flashing LED for battery change, Automatic battery switch-off during soap deposit refill and all completetd with fitting and fixtures & as per manufacturers specification and direction of Engineer-in-charge. Jaquar Model No-SDR-BLC-DJ0160ASN Automatic Soap Dispensers or Equivalent. each 1.00 0.00 0.00 Included in other item

NS 51 18% Wall Mounted Paper towel dispensers:- providing and fixing of stainless steel AISI 304, satin finish Wall Mounted Paper towel dispensers of Size 275x330x133 mm with Manual paper towel dispenser, surface mounted, Robust and vandal-resistant,this dispenser is designed to be installed in any type of washroom, Models suitable for C/Z folded paper towels; in this category, products are available that allow amounts ranging between 400 and 600 towels, Paper tower dispensers are supplied with a lock and special key for opening and screws, especially designed so that the paper can be easily replaced and all completetd with fitting and fixtures & as per manufacturers specification and direction of Engineer-in-charge. Jaquar Model No-PTD-SAP-DT0106CSN- Wall Mounted Paper towel dispensers or Equivalent. each 1.00 0.00 0.00 Included in other item

NS 52 18% Lighted Mirror:-Providing and fixing premium quality Led Brightner Led Mirror With Touch Sensor (3 Lights Integrated) size 18 inch X 24 Inch in oval/rectangular/rect-semi circular shape as approved by engineer-in-charge, Glass materials saint-gobin or equivalent mirror with PVC/Alumunium frame materials with smart one touch on/off with led light in three colours and quality with all fittings and fixtures complete including cutting and making good the walls complete to in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Mirrorwala/accent mirror or Equivalent. each 6.00 0.00 0.00 Included in other item

NS 53 18% Sink Cock: Providing and fixing Sink Cock with Regular Swinging Spout (Wall Mounted Model) With Wall Flange , flow rate 14.47 LPM @ 3 bar, Fittings : Components have WRAS Approved for food grade conformity with Brass Housing and Spindle, Life Cycle EN 200: 200,000 cycles (Standard) - 5.0 LAC Cycles as per EN 200*, Finish -Plating: Nickel-10.0 micron Chromium-0.3 micron Salt Spray (500 hrs + Validated) Adhesion (Pass) with colour finishing Chrome (CHR) with all fittings and fixtures complete including cutting and making good the walls complete to in all respect as per manufacturers specification and direction of Engineer-in-charge. JAQUAR Model No : ARI-CHR-39347S , Jaquar Sink Cock with Regular Swinging Spout (Wall Mounted Model) With Wall Flange OR EQUIVALENT. each 1.00 0.00 0.00 Included in other item

TOTAL : Part B - Renovation of Transit Camp Building and Toilets 0.00 0.00

C Part C- Development of Lawn

NS 54 18% Supplying and stacking of good earth at site including royalty and carriage upto 20 km lead complete (earth measured in stacks will be reduced by 20% for payment) cum 120.00 0.00 0.00 Included in other item

TOTAL : Part C- Development of Lawn 0.00 0.00

NON-SCHEDULE ITEMS:ELECTRICAL

D Part D - Renovation of Electrical Wiring and fittings

NS 55 18% Supply, installation, connection, testing and commissioning of pendent Light fitting suitable for upto LED 7W fixed on ceiling.( Philips Product SKU : 919215851305 or equivalent) each 5.00 0.00 0.00 Included in other item

NS 56 18% Supply, installation, connection, testing and commissioning of 6W LED Study Table Lamp suitable for Table standing. ( Philips Orbit Desk Light 919215850922 or equivalent) each 5.00 0.00 0.00 Included in other item

NS 57 18% Supply, installation, connection, testing and commissioning of 3W LED Foot Wall Step Concealed Light including cutting and making goods in wall for fixing. ( Murfy MLAC-FOOT-CONCEAL-NEW-WHITE-BODY-WW-01 or equivalent) each 10.00 0.00 0.00 Included in other item

TOTAL FOR NON-SCHEDULE ITEMS: (Electrical) 0.00 0.00

Total of Non-Schedule Items (Schedule - II) 0.00 0.00 Sheet OK

Total of Non-Schedule Items incl. GST(Schedule - II) 0.00 Sheet OK

As all the line items are Left Blank the bid is considered as Non-responsive

Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Name : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod,

Secunderabad - 500080

Sl. No. Description Total Price (INR)

1.1 TOTAL SCHEDULE NO. I

Supply & Installation Charges- Schedule Civil & Electrical Items for Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS NOT QUOTED

1.2 TOTAL SCHEDULE NO. II

Supply & Installation Charges- Non-Schedule Civil & Electrical Items for Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS NOT QUOTED

I Total of Service/Installation Charge (ITEMS TAB: Item 01 INSTALLATION FOR DCB (INR) : SRM ATB for BID PRICE SUMMARY Statement ) Non-responsive Bid

GST on Schedule-I 781,177.03

GST on Schedule-II 0.00

Total GST for BID PRICE SUMMARY Statement ) Non-responsive Bid

III GRAND TOTAL Non-responsive Bid

Date : 0 Printed Name : 0.00

Place : 0 Designation : 0.00

Specification No: SR-I/C&M/WC-4602/2026/RFx: 5002005169 (SR1/NT/W-CIVIL/DOM/B00/26/03499) Bid Form 2nd Envelope

BID FORM (Second Envelope)

Bid Proposal Ref. No.

Contract Services

Power Grid Corporation of India Ltd.,

Southern Region Transmission System-I

Name of Contract : Renovation of Transit Camp Building, Repair of Boundary Wall and developing Lawn at Raichur SS

Dear Ladies and/or Gentlemen,

1.0 In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. Non-responsive Bid /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. Non-responsive Bid

Sch-1 Schedules Items as per DSR 2021 excluding GST

Sch-2 Non-Scheduled Items

Sch-3 Grand Summary

2.3 We declare that as specified in Clause 4.6, ITB, Vol.-IA of the Bidding Documents, the prices of all the Services to be supplied under this contract shall be FIRM and doesnot subject to any price adjustment as per relevant clauses in bidding document.

3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST , which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.

5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.