Implementation of 24x7 water supply at Pattamundai Municipality to DMA-1.

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Cutting metalled road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.

Supplying all labour T&P and dewatering during work from the trenches including hire & running charges of dewatering pump set, cost of POL and operator etc, all complete as per direction of Engineer-in-Charge. (using 5 HP pump sets) ( as per site condition )

Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)

Laying Cost 150mm dia DI (K7)

100mm dia DI (K7)

Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality, testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.

Without Rubber Ring 150mm dia Push-on-joints

With Rubber Ring 100mm dia Push-on-joints

Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge.

150mm dia MJ Socketed Tail Piece

100mm dia MJ Socketed Tail Piece

Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials, labour,T&P etc all complete.

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.

150mm dia M.S.Pipe (4.50mm thick)

100mm dia M.S.Pipe (4.50mm thick)

150mm dia M.S. Flange.(10mm thick)

100mm dia M.S. Flange.(10mm thick)

150mm dia Plain Bend-90'

100mm dia Plain Bend-90'

150mm dia Equal MS A/F Tee

100mm dia Equal MS A/F Tee

100mmx 150 mm MS RS

Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials)

Supplying all labour and T&P for cutting of following diaflame cutting MS pipe of following thick in treanches by gas cutter set of pocket etc all complete

Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by fillet welding & genetator set including pocket cutting and welding complete.

Fixing cast iron cast iron sluice valves of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK

150mm dia D/F Sluice Valve (PN1.6)

100mm dia D/F Sluice Valve (PN1.6)

Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete.

150mm dia

100mm dia

Supplying all labour, T&P materials etc. and constructing brick masonry sluice valve chamber of following internal sizes :earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge. 0.90 m x 0.90 m x 1.225 m ( deep)

Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T&P etc all complete as per specification and direction of Engineer-in-charge.

Providing cement concrete (1:3:6) with 40mm size CBHG metal including cost of all materials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge.

Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge.

Supplying all materials, labour, T&P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete.

Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC.

Supplying all materials, Labour & T&P for providing New House connections to beneficiaries from DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc. including earth work excavation, cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damaged road with CC (1:2:4) after completition of the work, fixing 1/8" dia brass/ GM ferrule with following dia. composite Strap Saddle in the CI/DI pipe line, cutting holes in brick/ stone/ RCC masonary work, repair the broken holes, cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively ) & fittings, 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in- Charge.

Supplying all materials Labour & T&P for Fixing of Tamper proof Air Valve for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve.(VAG/ Talis Make)

25mm dia Tamper proof Duojet Air Valve

50 mm dia Tamper proof Duojet Air Valve

Please Enable Macros to View BoQ information