REPAIR TO CHHAJJA PARAPET GROUTING PLASTER AND OTHER BR ITEMS OF AGE BR II UNDER GE ROORKEE.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed.

Material and Labour, for pre-painted, galvalume aluminium zinc coating GI based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa AZ-150, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume zinc coated GI based plain sheet of any colour having tensile strength of 550 Mpa, AZ-150 fixed as in roof covering/ cladding to wall, ridges, valley gutter etc with self tapping screws complete all as specified and directed.

M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as in PCC Gola, hold fast cills/steps/coping etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Material and Labour for Steel tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to I. S.1161- 1979 grade Fe-290 (GdeSt.-165 complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, ccomplete all as specified and directed.

M&L for Providing and fixing tiled false ceiling of designer tiles (high pressure steam Cured) of 4 mm thickness (as per IS:14862) of size 595x595mm and approved design in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick MS powder coated/GI sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick MS powder coated/GI sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ‘T’ runner to be suspended from ceiling using GI soffit cleats/by using dash fastners to RCC lintel or slabs/ by welding MS cleats of suitable size on truss/purlin/rafters” GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, at all heights as per directions complete all as specified and directed.

S&F 4 to 5 mm thick PVC sheet Hallow /Sandwich wall paneling any pattern,colour,plain, wood grained consisting of inclusive of solvent cement and fixing at site on PVC frame(L & U ) complete all as specified and directed.

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) including Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.