Loading
Loading…
Loading…
Tender Value
₹77,878
Closing Date
14 Sept 2026, 6:00 pm2d left
AREA MANAGER (ENM) KATRAS AREA
OFFICE OF THE GENERAL MANAGER BCCL KATRAS AREA IV ENM DEPT. Post-SIJUA PIN-828121 JHARKHAND
COMPLETE REWINDING OF 65 HP MOTOR MAKE KIRLOSKAR RPM - 1480, VOLT 550, SI. NO. AARC /09 AT AARC, AKWMC
2026_BCCL_364929_1
BCCL/KA/ENM/E-TEN/2026-27/86 DATE-4.09.2026
Open Tender
Electrical and Maintenance Works
Percentage
15 days
AKWMC KATRAS AREA IV
Please refer Tender documents.
5 documents required · 5 mandatory
4 Sept 2026
4 Sept 2026
15 Sept 2026
4 Sept 2026
14 Sept 2026
4 Sept 2026
4 Sept 2026 - 7 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1ITEM DESCRIPTION / HEADLING | |||||
| 1.01 | SE copper wire | 50 | KG | 1,000 | ₹50,000 |
| 1.02 | insulating material 15% | 1 | AU | 7,500 | ₹7,500 |
| 1.03 | glass copper lead 40mm | 10 | M | 590 | ₹5,900 |
| 1.04 | block tin soldering strick 80% | 0.5 | KG | 2,000 | ₹1,000 |
| 1.05 | transporting up & down | 1 | AU | 1,600 | ₹1,600 |
| 1.06 | supervision charge | 1 | AU | 5,000 | ₹5,000 |
| 1.07 | high skilled labour charge | 16 | AU | 502.44 | ₹8,039.04 |
| 1.08 | skilled labour charge | 16 | AU | 434.96 | ₹6,959.36 |
| 1.09 | less scrap value | 50 | KG | 400 | ₹20,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.38 MB
BOQ_377844.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .