Construction of Maternity Block Labour Room at Kallapalli Primary Health Center Additional at Chinthalavadi Panchayat

Amount

Name of the Work : Construction of Maternity Block-Labour Room at Kallapalli Primary Health Center Additional at Chinthalavadi Panchayat

Earthwork excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inlusive of shoring strutting and boiling out water wheever necessary etc., complete complying with standard specification.

Supplying and filling of conveyed earth with a lead of 5Km for basement filling

Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge ISS HBG metal for foundation & flooring including labour charges etc., complete

Brickwork in CM 1:5 mix using country bricks groud maded of size 23x11x7cm including cost ad conveyance of all materials etc., complete

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B G 10 stiffened with MS angles of size 25mm x 25mm X 3mm laid over silver Oak (CW) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel-and binding wire also in all floors etc, complete

RCC 1: 1/2:3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering,shuttering, and ost of reinforcement grill out including curing etc complete and also including fixing fan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:3-10mm thick including packing, providing cement mortar beading for sunshades staircase, steps, lands slabs etc as directed by departmental officers etc, complete

Plastering with cm 1:5 mix one cement and five sand] to 12 mm thick including cost 9 and conveyance of all materials in all floors etc. as directed by departmental officers etc. complete complying with standard specifications:

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1.3 (one cement and three crushed stone 0 M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab, the proportion of brick jelly to lime being "32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc.

Finishing top roof mix one course machine pressed tiles of size 26 cm x 20 cm x 2 cm approved qty with,CM 13 12 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc

Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete.

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping clean removel of dirt etc complete

Fabricating Supply and fixing and position of MS doors with single leave The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc, complete with one coat red oxide primer

Fabricating Supply and foxing and position of MS Windows with two leave The window outer frame will be 35x35x6mm MS angle, the shutter frame will be 25x25x6 mm, MS angle 16 intermediate stiffner will be 25x25x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge MS. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer

Painting two coats of new iron work with best quality synthetic enamel paint of approved quality and colour with priming coat including the cost all materials etc .complete, in all floors

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

K DHANASEKARAN