WBPWD/EE/PED/NIQ20 /2021-2022

Amount

Dismantling old MCB Distribution board (Concealed) from wall after disconnecting incoming and outgoing connection and also making temporary connection for supplying power and mending good damages.

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

2 + 14 Way (L&T Make)[D-9/10-13]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.

63 A DP [L&T Make] [D-5/6]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

6 -32A SP (L&T Make) [D-6/7]

Supplying and fixing 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [D-4/4(b)]

32A Make:-Siemens [D-4/4(b)]

Supply of 1.1 KV Gr.PVC/Al./A. Cable Make (Havells/Gloster/Polycab)

2 core 6 sqmm cable [NS]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed after withdrawing the damaged cable. [F-2/1(a)]

Supply of 2 core 1.5 Sq mm PVC Insulated and PVC Sheathed Industrial Cables with Flexible Bright Annealed Copper Conductor for Voltage Grade upto 1100 Volts , Make (Gloster/Polycab)

Supplying and fixing compression type gland with brass gland ,brass ring & rubber ring for dust & moisture proof entry for following XLPE / PVC armoured cables.

2 core 6 sq. mm[F-4/7.a]

2 core 10 sq. mm[F-4/7.a]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

2core 6 sq. mm[F-5/8.b(ii)]

2 cor 10 sq. mm[F-5/8.b(iii)]

S&F 50 mm dia x 1.5 mtr long GI Mini pole (ISI-Medium) with welded base plate of 225mmx 225 mmx 6 mm thick on roof incl. CC (6:3:1) muffing 450x450x600 mm in size or equivalent cylindrical muffing above roof level incl. 3 mm thick neat cemented finish and GI earth bolt ,cable entry after making holes on pole incl. S&F 200x150x100 mm GI (4mm thick) loop box inpole muffing incl. S & Laying 3 x 1.5sqmm FRLS CU conductor PVC insulated from loop box to light fittings via mini pole and Arm bracket including painting of pole and Arm bracket.

Dismantling damaged arm bracket from pole upto 9 mtr long and cutting the pole upto damaged portion and S&F single arm brackets assembly made of 100mm dia 0.3 mtr long welding with 32 mm dia 1.5 mtr long GI pipe (ISI-M) with through nut bolts incl. drilling hole on ppole and painting with synthetic enamel paint.

Supply and Fixing 25W LED street light luminaire complete with all accessories on the roof top Mini pole (Crompton Make Cat no. LSTS-25-CDL-M) in place defective one.

Supply and fixing 45W LED street light luminaire complete with all accessories the roof top Mini pole(Crompton Make cat no.- LSTS-45-CDL-M) in place of defective one.

Supply and fixing 90W LED street light luminaire complete with all accessories on roof top Mini pole (Crompton cat no. LSTP-90-CDL-M) in place of defective one.

Supply and fixing 40W Post top decorative LED luminaire with all accessories(Crompton -MAPLE, Cat No:- LPTO-40-CDL) inplace of defective one incl. S&F 40 mm dia GI pipe (ISI- Medium) of length 2 ft or as per requirement and grouting the same on CC boundary wall and drilling hole on pipe for cable entry after dismantling old pipe incl. mending good damages and painting.

Supply and fixing 25W LED Post top decorative gate light complete with all accessories [(Bajaj Make Cat No:- BLPTSP 25W NW LED] in place of defective one incl. S&F suitable size net guard fabricated from 6 SWG GI wire.

Repairing of existing gate light (Philips Make) incl. S&F integral housing ,holder , spherical cover etc.

Supply and fixing 18W surface mounted Led luminaires ( Crompton Cat no. LCDSPLN-S-18-CDL) directly onwall with necy. GI fastner and other accessories

Supply 25W LED street light luminaires complete with all accessories (Crompton Make Cat no. LSTS-25-CDL-M).

Supply 45W LED street light complete with all accessories (Crompton Make cat no.- LSTS-45-CDL-M).

Supply 90W LED street light complete with all accessories (Crompton Make cat no.- LSTP-90-CDL-M).

Supply of 4' 18W T8 Master LED tube light (2100 lm )(Philips/Crompton Make)

Supply of 9W LED Bulb (Make Philips/ Bajaj/ Crompton)

Supply of 20W LED Bulb(Make - Philips/ Bajaj/ Crompton )

Supply of 230 V, AC Ceiling fan complete with blade, canopy, down rod upto 1 ft.1200 mm (48") sweep, ( Make- Orient New Breeze/Crompton - High Speed) [NS]

Supply of 2.5Micro Farad Capacitor [NS]

Supply & Fixing 240 V, 25A Modular switch type DP MCB (C-Curve) (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/19(b)]

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting [I-2/16]

200 x 150 x 100mm [I-2/16(a)]

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary [I-1/12]

Without Loop Box [I-1/12(a)]

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint [H-2/4]

1st coat of aluminium paint over 1 coat of RO priming Upto 9.0 mtr. long pole [H-2/4(a)(i)]

2nd coat of aluminium paint over 1st coat Upto 9.0 mtr. long pole [H-2/4(a)(ii)]

M/S. S. D. CHATTERJEE AND CO.

MAA BISHWESHWARI ELECTRICAL