Repairing of Tiskari Talat Existing ESR of Kurgam -Tumbi RWSS Taluka: Dharampur District:Valsad (Pl see detailed scope of work)

NAME OF WORK :-

PART - I Repairing of Tiskari Talat Existing ESR

Schedule showing the approximate item wise quantity More/Less to be carried out for above mentioned work

Estimate Cost Put Tender Rs. TIME LIMIT

711715.31 3 MONTHS

Qty. Unit Items Rate Per Amount

PART - I Repairing of Tiskari Talat Existing

ESR -1.5 LL Capacity 15m Height

Removal of distressed/unsound RCC concrete

including disposal

72.0919 M3 25% of total area 1047.38 M3

Supplying cutting, bending, binding and placing in

position steel as per plan and design and as per

ISS 2502 including cost of steel and binding wire

2.30721 MT for reservoirs/structures for all diameters Do — 77504 MT

deformed (TMT) bars confirming to relevant IS Fe

— 500 grade for all diameters.

Gunniting exterior surface for Civil Structures

only Gunniting the surface in CM 1:2 having

thickness of 40 mm to 50 mm (Ave.) for beam,

braces, column and container slab incl. chiselling

and scraping loose concrete cleaning the surface

with water and air under pressure and including

providing and fixing in position steel wires square

mesh 75 mm x 75 mm as per IS:1966-1982

mm W/Sq.Mt. 1.64 Kg. with spot welding

wherever necessary with main reinforcement

incl. tying binding with wire incl. scaffolding

centering staging all equipment and materials

etc. complete incl. labour and testing of the

158.06 M2 (A) Area of shaft Vertical wall

14.13 M2 (B) (1) Area of Bottom slab inside the shaft

39.25 M2 (C) Bottom slant surface area

43.96 M2 (D) Vertical wall of container

32.97 M2 (E) Top dome

288.37 Total Area 654.104 M2

Gunniting Internal Surface Providing the

gunniting to interior surface of

cement/masonry/Water Tank of various

capacities as specified at various places with

cement mortar (1:2) in thickness of 40 mm

including chiselling and scraping loose concrete

and plaster incl. providing and fixing in position

mm dia. mild steel bars reinforcement at 15 cm

c/c both ways including fabricating and cost of

binding wires including centering, staging all

equipments etc. complete including scaffolding,

carting of all type of material and equipments to

site of work and giving hydraulic testing up to

satisfaction of engineer in - charge. For top,

bottom of ESR/GSR/tank/cistern

(A) With vertical walls, columns, braces and

54.5787 M2 shaft up to 6 m height Area of shaft Vertical wall 471.427 M2

(B) Do- for columns, braces and shaft staging

84.6387 M2 above 6m height Area of shaft Vertical wall 650.177 M2

123.245 M2 (C) Do- for RCC container (inside) 602.052 M2

RCC spiral staircase with central circular in M-20

as per desion including M.S. reinforcement,

centering, shuttering, form work scaffolding

,finishing and curing lncluding providing and

fixing balusters of 1.0 meter (work below G L' for

column and footing will be paid Extra) for 1m

radius and 20 cms rise

90.00 Nos Steps 1100.00 Nos

Finishing Wall with water Proofing Cement paint

of on wall surfaces ( Two coats) to give an

approved brand and manufacture and of

required shape even shade after thoroughly

brushing the surface to remove all dirt and

remains of loose powered materials. 1st Year

Pro Providing and applying Food grade Epoxy

paint of approved make to concrete surface for

RCC ESR of GSR or any other structure including

cleaning the surface by scrapping and air blowers

to the satisfaction of Engineer-in-charge

necessary scaffolding etc. complete with all leads

and lifts and giving satisfactory hydraulic test for

water tightness as per IS codes.

90.275 M2 Epoxy paint to RCC- Inside Concrete sarface 106.7 M

Part - I Total Rs.

( Rupees Seven Lacs Eleven Thousand seven Hundred fifteen And thirthy one Paise Only)

I / We am/are willing carry above said work at __________ percentage ___________________

(should be written in figure and words) above/below the put to tendered rates maintioned above

.Amount of my tender working out as per under :- Rs.______________

Estimate amount Estimate amount

Put to tender Rs. Put to tender Rs.

Deduct % below Rs. Add % above Rs.

Net Rs. Net Rs.

In words Rs. In words Rs.

(Please strick out which ever is not applicable)

1. All the work shall be carried out as per P. W. D. Hand book vol. I & II and other specification.

2. All the columns in schedule “B” should be filled in the total of the entry in the last column.

3. Rates quoted shall be for the completed items of work and shall include clearance of site

Signature of Executive Engineer, Deputy Executive Engineer

the Contractor. P.H.W.Division, P. H. Sani. Sub. Division

G.W.S.S.Board, Valsad G.W.S.S.Board, Dharampur