Special repair to bldg no NP 278 and Provn of Candidate waiting area cum despatch overhead shed at ARO Ahmedabad

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise as dircetd and as specified.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified.

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.6 Sqm but n exceeding 0 .11 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:4 in floors, complete all as specified and directed. complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in wall/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:3) complete all as specified

M&L for Vitrified Ceramic tiles light shade 10 mm, (square or rectangular) area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:4

All as per item No 9 above but on vertical surfaces incl 10mm thick backing coat of tiles in CM (1:3) complete all as specified

M&L Udaipur Green marble 18-20 mm thick laid and jointed with grey cement slurry over and including 20 mm thick CM 1:3 screed bed complete all as specified and directed.(Note: All exposed side of stone slab to be rounding)

Removing of existing unserviceable water proofing treatment with PCC padding, taking down cement plaster etc of any description and cleaning of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete.

M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with water proofing compound @3% by weight of cement & applying one coat of bitumenous primer @ 0.30 kg/sqm & laying APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm of 3 mm thick with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint 0.2 litre /sqm as per the makes approved by the Engr-in-Charge. Note: WPC shall be measured and paid sepratly

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs.

S & F 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed(Make : Sintex or Polycon).

M&L for PCC (1:3:6) Type C-2 with using 40mm graded stone aggregates as in platform for PVC tank all complete as specified and as directed.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for rendering on fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate in roof etc. as levelling coarse etc. all as specified and as directed by Engineer-in-Charge

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface complete all as specified and directed.

M&L newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed.

M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement.

M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

M&L complete removal of existing treatment of ceiling and applying three coats of white washing complete all as specified and directed.

Demolition of brick work built in cement mortar of any description.

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.

S&F in repairs vitreous china wash basin, white, flat back, size (560x410 mm ) Oval shaped Counter top self rimming type excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed

S&F in repair 15 mm bore angle cock with flage complete all as specified and direcrted (Cat part No 8310 of Make-Prayag or its equivalent make).

S&F in repair CP towel rail complete all as specified and directed.

S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

Supply only pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore.

S & F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms)

Dismaintling of 100mm bore cast iron pipe jointed in cement mortar and taking out of trenches or any description and any position as required complete all as specified and directed.

S&F of 100mm bore cast iron soil , waste and vent pipe, sand cast, in any length , with or without ears , with cement joints in cement sand mortar 1:1 with spun yarn fixed to wall complete all as specified and directed.

S & F cast iron soil, waste and vent pipe, sand cast 75mm bore in any length, with or without ears, with cement joints in CM 1:1 with spun yarn fixed to over septic tank or soakage well complete all as specified and directed

S&F of 100 mm bore cast iron bend/TEE (any Radius) diminishing pieces or tapers (Large bore measured) complete all as specifed and directed.

Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site.

Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame).

S&F anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock, with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle with or without opeing for AC as directed by EIC etc

S & F of mild steel work such as window guard bars ,truss and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

S&F in repair repair 25 mm dia drapery rod fancy powder coated fixed to wall with bracket & knobs complete.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated, etc)/ ppgl sheets in roof covering complete all as specified.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified specified

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified specified

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

M&L for pre Polished Chequered cement concrete tiles 30cm x 30cm x25mm thick on horizontal surfaces,set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6 all as Specified.

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest) 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S & F 100 MM Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

M&L for preparation of newly plastered surfaces and applying two coats of Acrylic Emulsion Exterior (Apex Ultima) weather proof paint over one coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment and two coats of Acrylic Emulsion Exterior (Apex Ultima) weather proof paint on old surface including one coat of primer on walls complete all as specified. (note : chhajja and roof facia shall be in different colour)

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil

M&L Cement concrete type D-2 1:4:8 using 40 mm graded aggrigate in foundations, filling and mass concrete

M&L RCC Type B1 1:2:4 using 20 mm graded aggrigate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

S&F Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for stirrups etc

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings, Gates and heavy bracket framing (Beam, tee, angle, plates, nut bolts, channel or flat sections) including distance pieces, cleats etc confirming to quality Fe 410-W(Gde-E- 250) quality- A

M&L for preparation of new steel Surfaces apply two coats of synthatic enamel paint of any description, over 10cm in width or girth,not otherwise described

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

M&L Rendering 10 mm thick on brick work or concrete surfaces in CM 1:6 and finishes the surface even and smooth without using extra cement.

M&L Rendering 15 mm thick on brick work or concrete surfaces in CM 1:4 and finishes the surface even and smooth without using extra cement.

M&L for prepartion of new plastered surfaces on walls and applying two coatsoil bond distemper on over one coat of primer on walls all as specified and directed.

M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls all as specified and directed

Returning ,filling in ,including ,spreading , levelling , watering and well ramming in layers n.exc. 15 cm .

Removing excavated material exc1.5 km and n.exc 5.0 KM depositing where directed at a level n. exc 1.5 m above the starting point.

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection/path finishing the surface even and smooth w/o using extra cement including bitumen joints complete.

M&L Hardcore (using broken stone) of gauge n exc. 63 mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for providing cement concrete type B-0 1:2:4 (using 12.50 mm graded stone aggregrate) in copings and DPC complete.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (20mm graded aggregate)as in sub base all as Specified.

M&L for 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate)finished even and smooth with using extra cement all as Specified.

M&L Plastic dividing strips 1.5 mm thick, 38 mm wide and inserted in position and confirmed to design complete

M&L Chequered cement concrete tiles with white cement and pigments 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in CM 1:6 complete

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators complete for the following :-

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(d) One socket outlet 6 amp controlled by one switch on indepdendent board.

Point wiring Modular with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red/Yellow/Blue, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken box with top plate/ frame of same manufacture for one 16 amp socket outlet Modular type for controlled by one switch on independent board complete. .

S&F modular switch one way 6 amp 1 module all as approved.

S&F modular switch one way 16 amp 1 module all as approved.

S&F modular socket 6/16 - 2/3 pin combined 2 module all as approved.

S&F modular socket 6 amp 2/3 pin combined 2 module all as approved.

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as approved

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.

S&F LED 20W building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed

Material & labour for Earthing using galvanised iron earth plate electrode of size 60cm X 60cm X 6mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers made of GI and protected by light grade 40 mm dia galvanised iron pipe and GI pipe light grade 20mm bore for watering, including funnel, wire mesh, FRP pit chamber with cover (including necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown on plate No 3 of SSR Part-I 2009.

S&F MCB distribution board SPN, 240 volts, 12 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved.

(b) Double pole 32 amp MCB

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

S&F ceiling fans complete with blades,down rods,electronic regulator and accessories, , 230 volts, 1200 mm sweep,min air delivery 210 CFM with service value 6.00 BEE,five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Excavation in trenches n.exc 1.5 M wide and n.exc. 1.5 M in depth and getting out in any type of soil all as directed by Engr-in-Charge

Returning filling in including spreading levelling and well ramming in n.exc. 25 Cum complete all as directed by Engr-in-Charge.

Removing the excavated material n.exc. 50m and depositing where directed at & level n.exc. 1.5m above the starting point all as directed.

Supply and laying of DWC (double wall corrugated) HDPE pipe, ISI marked, IS 14930 Part II of outer dia 50mm and inner dia 38mm with smooth internal and profiled external surface for non pressure underground cables including all connected accessories like coupler, o-ring etc complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core.

S&F LED 20W building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement pipe bracket and connections as directed

S&F MCBs as per load requirement of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) Single pole 6 to 32 amp.

(b) Double pole 32 amp MCB

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10sq. mmX 2Core

VIJAY CONSTRUCTION CO

GIRNAR CONSTRUCTION

SANVI ASSOCIATES

TECH SERVE SOLUTIONS

SNEH TRADERS